l13201-0430m kled1069e

Mid infrared LED
L13201-0430M
Peak emission wavelength: 4.3 μm
The L13201-0430M is a mid infrared LED with a 4.3 μm peak emission wavelength. It is a product that has been achieved using Hamamatsu unique crystal growth technology and process technology. It is a suitable light source for CO2 detectors.
Features
Applications
High output
CO2 detectors
High-speed response
High reliability
Low power consumption
Absolute maximum ratings (Ta=25 °C, unless otherwise noted)
Parameter
Reverse voltage
Forward current (QCW mode*1)
Symbol
VR
IFqcw
Pulse forward current
IFP
Power dissipation
Operating temperature
Storage temperature
P
Topr
Tstg
Condition
Pulse width=100 μs
Duty ratio=50%
Pulse width=10 μs
Duty ratio=1%
No dew condensation*2
No dew condensation*2
Value
1
Unit
V
100
mA
0.5
A
110
-30 to +60
-30 to +60
mW
°C
°C
*1 Quasi continuous wave mode
*2 When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation
may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability.
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
Electrical and optical characteristics (Ta=25 °C)
Parameter
Peak emission wavelength
Spectral half width
Radiant flux
Forward voltage
Reverse current
Rise time
Symbol
λp
∆λ
ϕe
VF
IR
tr
Condition
IF=80 mA, QCW mode
IF=80 mA, QCW mode
IF=80 mA, QCW mode
IF=80 mA, QCW mode
VR=100 mV
10 to 90%
Min.
4.1
0.15
-
www.hamamatsu.com
Typ.
4.3
0.7
0.3
1.6
-
Max.
4.4
1.0
2.0
1000
1
Unit
μm
μm
mW
V
μA
μs
1
Mid infrared LED
L13201-0430M
Emission spectrum
Radiant flux vs. pulse forward current
(Typ. Ta=25 °C)
100
(Typ. Ta=25 °C, tw=10 μs, duty ratio=1 %)
1
90
70
Radiant flux (mW)
Relative light output (%)
80
60
50
40
30
0.1
20
10
0.01
10
0
3
2
4
5
6
100
1000
Pulse forward current (mA)
Wavelength (μm)
KLEDB0414EA
KLEDB0415EA
Light output vs. ambient temperature
Allowable forward current vs. ambient temperature
(Typ. IF=80 mA, QCW mode)
160
120
Relative forward current (%)
Relative light output (%)
140
120
100
80
60
40
100
80
60
40
20
20
0
0
10
20
30
40
50
60
70
Ambient temperature (°C)
0
-40
-20
0
20
40
60
80
Ambient temperature (°C)
KLEDB0416EA
KLEDB0417EA
2
Mid infrared LED
L13201-0430M
Allowable forward current vs. duty ratio
(Ta=25 °C)
1
tw=10 μs
tw=100 μs
0.1
0.01
0.01
0.1
1
10
100
Duty ratio (%)
KLEDB0418EA
Dimensional outline (unit: mm)
ɸ5.4 ± 0.2
2.75 ± 0.2
ɸ4.72 ± 0.1
Si window
ɸ2.2 min.
12.7 ± 1
Allowable forward current (A)
10
ϕ0.43
Lead
ϕ2.54 ± 0.2
KLEDA0101EA
3
Mid infrared LED
L13201-0430M
Related information
www.hamamatsu.com/sp/ssd/doc_en.html
Precautions
· Disclaimer
· Metal, ceramic, plastic packages
Technical information
· LED
Information described in this material is current as of November, 2015.
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741
China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866
4
Cat. No. KLED1069E01 Nov. 2015 DN