Photo IC for optical link L12557-01SR, S12423-01SR Transmitter/receiver photo IC for DC to 10 Mbps optical link The L12557-01SR transmitter photo IC combines a 650 nm red LED, which is suitable for plastic optical fiber (POF) communication, and a driver IC. It has a mini molded lens suitable for coupling to the POF. It supports communication speeds ranging from DC to 10 Mbps. The S12423-01SR receiver photo IC has monolithically integrated PIN photodiode and signal processing circuit. It features small size and strong resistance to electromagnetic induction noise. The S12423-01SR generates digital output (CMOS). Features Applications Transmitter photo IC Data transmission in harsh, noisy environments, such as in FA and OA. High-speed, short-distance data transmission Peak emission wavelength: 650 nm Highly bursty data transmission L12557-01SR Supports DC to 10 Mbps communication S12423-01SR Receiver photo IC Supports DC to 10 Mbps communication Monolithic photo IC featuring strong resistance to electromagnetic induction noise Digital output (CMOS) Absolute maximum ratings Parameter Symbol Condition Value Unit L12557-01SR -0.5 to +7.0 Vcc V Supply voltage S12423-01SR -0.5 to +4.0 Input voltage L12557-01SR Vin -0.5 to Vcc+0.5 V Output voltage S12423-01SR Vo -0.5 to Vcc+0.5 V Power dissipation*1 Pmax 250 mW Operating temperature Topr No condensation*2 -20 to +85 °C Storage temperature Tstg No condensation*2 -40 to +85 °C Soldering conditions Tsol 230 °C, within 5 s, at least 2 mm away from lead roots *1: Power dissipation decreases at a rate of 1.75 mW/°C above Ta=25 °C. *2: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Recommended operating conditions Parameter L12557-01SR Supply voltage S12423-01SR High level input voltage L12557-01SR Low level input voltage High level output current S12423-01SR Low level output current Symbol Vcc Vih Vil Ioh Iol Min. 4.75 3.135 2 -0.3 -4 0 www.hamamatsu.com Typ. 5.0 3.3 - Max. 5.25 3.465 Vcc + 0.3 0.8 0 4 Unit V V mA 1 Photo IC for optical link L12557-01SR, S12423-01SR L12557-01SR Electrical and optical characteristics (Ta=25 °C, Vcc=4.75 to 5.25 V, unless otherwise noted) Parameter Current consumption Symbol Icc Data transmission rate fD Condition Vin=2.0 V Biphase signal (NRZ conversion) Min. - Typ. - Max. 40 Unit mA DC - 10 Mbps 650 670 nm 0.13 - nm/°C 20 - 30 -1.0 20 20 +15 20 nm dBm ns ns ns ps Peak emission wavelength λp 630 Temperature coefficient for Tcλ peak emission wavelength Spectral half width (FWHM) ∆λ Fiber coupling optical output Po Peak value*3 -10.0 Rise time tr 20 to 80%*3 *4 *5 Fall time tf 80 to 20 %*3 *4 *5 Pulse width distortion ∆Tw 50%*3 *4 *5 -15 Jitter ∆tj *3 *4 *5 *3: For the fiber, use Mitsubishi Rayon GH4001 (ϕ1 mm, SI-POF, NA=0.5, 1 m). *4: For the input signal, a 10 Mbps pseudo-random biphase signal is assumed. *5: Defined using the average at 50% duty ratio. S12423-01SR Electrical and optical characteristics (Ta=25 °C, Vcc=3.135 to 3.465 V, unless otherwise noted) Parameter Symbol Condition Min. Typ. Biphase signal fD DC Data rate (NRZ conversion) Current consumption Icc No optical input Maximum reception level Pi max Peak value*6 2 Minimum reception level Pi min Peak value, Pe=10-7*6 High level output voltage Voh Ioh=-150 μA 2.7 Low level output voltage Vol Iol=1.6 mA Output voltage Rise time tr 20% to 80%*4 *7 Fall time tf 20% to 80%*4 *7 Pulse width distortion ∆t *4 *6 *7 -25 Jitter ∆tj *4 *6 *7 *6: A signal generated by a Hamamatsu’s standard signal generator is assumed for the optical input signal. *7: CL=5 pF (including parasitic capacitance of probe, connector, and printed circuit board) TPLH Input light waveform TPHL 50% Input light waveform T1 tr 50% T2 80% 50% 20% ∆T=T2 - T Output waveform 50% ∆tjr ∆tjf Unit 10 Mbps 40 -20 0.4 20 20 +25 20 mA dBm dBm V V ns ns ns ns Parameter Symbol Measurement method Rising edge jitter ∆tjr Set the trigger to the PPG CLK, and measure the jitter in the rising edge of the output. Falling edge jitter ∆tjf Set the trigger to PPG CLK, and measure the jitter in the falling edge of the output. Jitter ∆tj Set Δtj to the larger of the two jitter values: Δtjr and Δtjf. tf Output waveform Max. KPICC0250EA Note: [L12557-01SR, S12423-01SR] · Connect a 0.1 μF bypass capacitor within 3 mm of this element’s lead (between Vcc and GND). In addition, connect a 4.7 μF capacitor. · Align the center axes of the fiber and package lens, and make the gap between the fiber and the optical reference plane of the lens surface 0.1 mm. 2 Photo IC for optical link L12557-01SR, S12423-01SR Dimensional outline (unit: mm) 1.77 5.2 ± 0.3 (Including burr) 5.0 0.97 10° 4.3 ϕ1.8 10° ϕ2.0 depth 0.15 max. 8.2 ± 0.4 (4×) 0.4 A (2×) ϕ1.0 depth 0.15 max. (0.9) (4×) 0.5 4.5 ± 0.3 (Including burr) 1.4 (1.5) (2.15) 4.3 0.69 Pin no. L12557-01SR S12423-01SR Vin Vout GND GND GND Vcc Vcc Vcc Tolerance unless otherwise noted: ±0.1, ±2° Shaded area indicates burr. Values in parentheses indicate reference values. Standard packing type Plastic tray (100 pcs/tray) Material: PVC (conductive) (4×) 0.25 1.27 1.27 1.27 (0.9) 10° 0.66 ϕ0.2 (0.9) ϕ1.24 ϕ1.8 (Specified at lead root) 0.25 Enlarged view of A 10° 5.0 KPICA0096EA Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer ∙ Metal, ceramic, plastic products 3 Photo IC for optical link L12557-01SR, S12423-01SR Information described in this material is current as of March, 2015. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KPIC1093E02 Mar. 2015 DN 4