c13366-1350ga etc kacc1228e

MPPC® modules
C13366 series
(GA type)
Optical measurement modules for low-level-light detection,
Analog output
The C13366 series (GA type) are optical measurement modules capable of detecting low level light. These modules consist of
a thermoelectrically cooled MPPC, a signal amplifier circuit, a high-voltage power supply circuit, and a temperature control circuit. The photosensitive area is available in two sizes of 1.3 × 1.3 mm and 3 × 3 mm, and the signal output is analog. Modules operate just by connecting them to an external power supply (±5 V).
Features
Applications
Built-in TE-cooled MPPC
[MPPC for precision measurement (new product)]
Low-level-light measurement
High sensitivity in the short wavelength range
Fluorescence measurement
Low noise equivalent power
Analytical instrument
Flow cytometry
Built-in temperature control function
Analog output
Structure
Parameter
Internal MPPC
Effective photosensitive area
Pixel pitch
Number of pixels
Symbol
-
C13366-1350GA
S13362-1350DG
1.3 × 1.3
C13366-3050GA
S13362-1350DG
3×3
Unit
mm
μm
-
50
667
3600
Absolute maximum ratings
Parameter
Supply voltage
Operating temperature
Storage temperature
Symbol
Vs
Topr
Tstg
Condition
Value
±6
-10 to +40
-20 to +70
No dew condensation*1
No dew condensation*1
Unit
V
°C
°C
*1: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation
may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability.
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
Electrical and optical characteristics (Typ. Ta=25 °C, λ=λp, Vs=±5 V, unless otherwise noted)
Parameter
Spectral response range
Peak sensitivity wavelength
Element temperature
(setting temperature)
Photoelectric sensitivity
High band
Cutoff frequency
Low band
Rise time
Noise equivalent power
Minimum detection limit
Maximum output voltage
Symbol
Condition
λ
λp
Td
-
fc
tr
NEP
-
C13366-1350GA
Min.
Typ.
Max.
320 to 900
500
-
-3 dB, sine wave
10 % to 90%, 1.p.e.
Dark state
Dark state
-20
-
C13366-3050GA
Min.
Typ.
Max.
320 to 900
500
-
-20
-
Unit
nm
nm
°C
0.7 × 109 1.0 × 109 1.3 × 109 0.7 × 109 1.0 × 109 1.3 × 109
V/W
3
4
3
4
MHz
DC
DC
ns
5
9
0.1
0.2
0.15
0.3
fW/Hz1/2
0.25
0.5
0.35
0.7
pW rms
4.7
4.7
V
www.hamamatsu.com
1
MPPC modules
C13366 series (GA type)
Electrical characteristics
Parameter
Supply
voltage*2
Symbol
+Vs
-Vs
Current consumption
Ic
Condition
+Vs
-Vs
Min.
+4.75
-4.75
-
Typ.
+5
-5
+200
-20
Max.
+5.25
-5.25
+1000
-40
Unit
V
mA
*2: A power supply with 1 A or higher output must be used.
Block diagram
TE-cooled type
MPPC
High-voltage
controller
High-voltage power supply circuit
Temperature
controller
Microcontroller
Amplifier
±5 V
Analog output
KACCC0680EA
Connection example
Using the supplied power cable, connect the MPPC module to a power supply. You can monitor the output waveform by connecting the
MPPC module to an oscilloscope.
Oscilloscope
Analog signal cable
Power cable
(accessory)
Light source
Photons
MPPC module
Power supply (±5 V)
Subject
KACCC0684EA
2
MPPC modules
C13366 series (GA type)
Measurement example
Analog output
(Incident light level: 200 pW, λ=λp)
100 mV
GND
1 μs
Photoelectric sensitivity vs. wavelength
(Typ. Ta=25 °C)
1.2 × 109
(Ta=25 °C)
5
1 × 109
0
Relative output (dB)
Photoelectric sensitivity (V/W)
Frequency response (typical example)
8 × 108
6 × 108
4 × 108
-5
-10
-15
2 × 108
0
200
400
600
800
1000
-20
0.2
0.1
1
10
100
Frequency (MHz)
Wavelength (nm)
KACCB0391EB
KACCB0392EA
3
MPPC modules
C13366 series (GA type)
Linearity
(Typ. Ta=25 °C, λ=λp)
101
10-1
10-2
10-3
Ideal value
C13366-1350GA
C13366-3050GA
10-4
10-13
10-12
10-11
10-10
10-9
10-8
Incident light level (W)
KACCB0396EA
Dimensional outline (unit: mm)
Photosensitive area
Power connector
(4.9)
Photosensitive surface
35
Power
60
Signal
Analog output connector (SMB connector)
98
(4 ×) M3 Depth 5
45
Output voltage (V)
100
Pulse condition
Repetition rate: 5 kHz
Pulse width: 2 μs
Duty ratio: 1 %
Tolerance unless otherwise noted: ±0.5
Weight: 230 g
40
20
KACCA0314EA
4
MPPC modules
C13366 series (GA type)
Accessories
∙ Power cable
∙ Instruction manual
Options (sold separately)
Coaxial converter adapter A10613 series
The A10613 series is a coaxial adapter that converts the SMB coaxial connector for signal-output on the MPPC module to a BNC or SMA
coaxial connector. This adapter allows connecting a BNC or SMA cable to the MPPC module.
A10613-01 (SMB-BNC)
A10613-02 (SMB-SMA)
Precautions
∙ For cleaning the product, wipe using a clean, soft, dry cloth. Do not use organic solvents such as thinner and acetone.
∙ Do not cover the product with a dark cloth or something similar while the product is running. Covering it can cause the internal temperature to rise and cause abnormal operation.
Lineup of MPPC modules
Type no.
C13365-1350SA
C13365-3050SA
C13366-1350GA
C13366-3050GA
C13366-1350GD
C13366-3050GD
Output
Analog
Analog
Digital
Effective photosensitive area
(mm)
1.3
3.0
1.3
3.0
1.3
3.0
×
×
×
×
×
×
1.3
3.0
1.3
3.0
1.3
3.0
Pixel pitch
(μm)
Cooling
Non-cooled
50
TE-cooled
TE-cooled
5
MPPC modules
C13366 series (GA type)
Related information
www.hamamatsu.com/sp/ssd/doc_en.html
Precautions
∙ Disclaimer
MPPC is a registered trademark of Hamamatsu Photonics K.K.
Information described in this material is current as of April, 2016.
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741
China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866
Cat. No. KACC1228E03 Apr. 2016 DN
6
Similar pages