EC centrifugal fan G3G200-GN26-01 backward curved, single inlet with housing (flange), Gas blower for gas-condensing heating ebm-papst Landshut GmbH Hofmark-Aich-Str. 25 · D-84030 Landshut Phone +49 871 707-0 Fax +49 871 707-465 [email protected] www.ebmpapst.com Nominal data Type G3G200-GN26-01 Motor M3G084-DF Phase 1~ Nominal voltage VAC 115 Nominal voltage range VAC 100 .. 130 Frequency Hz 50/60 Type of data definition ml Speed min-1 5700 Power input W 800 Current draw A 10.5 @ 100 V Min. ambient temperature °C -20 Max. ambient temperature °C 60 Min. temp. of flow medium °C 0 Max. temp. of flow medium °C 60 ml = max. load · me = max. efficiency · rfa = running at free air · cs = customer specs · cu = customer unit Subject to alterations Item no.: 50367-5-9980 · Revision: 68161 · Print-out 07/11/2011 · K. Boruzki (VI-I) · Page 1 of 5 ebm-papst Landshut GmbH · Hofmark-Aich-Str. 25 · D-84030 Landshut · Phone +49 871 707-0 · Fax +49 871 707-465 · [email protected] · www.ebmpapst.com EC centrifugal fan G3G200-GN26-01 backward curved, single inlet with housing (flange), Gas blower for gas-condensing heating Technical features Mass 9.2 kg Size 200 mm Surface of rotor Coated in black Material of protective cover Polyflam RPP 374-ND CS1 (UL 97-V0) Material of impeller Aluminium sheet Housing material Die-cast aluminium Number of blades 7 Direction of rotation Clockwise, seen on rotor Type of protection IP 20 Insulation class "B" Max. permissible ambient motor temp. (transp./ storage) +80 °C Min. permissible ambient motor temp. (transp./storage) -40 °C Mounting position Any Condensate discharge holes Rotor-side Operation mode S1 Motor bearing Ball bearing Technical features - PFC, passive - Tach output - Over-temperature protected electronics / motor - Line undervoltage detection - Motor current limit - PWM control input - Control input 0-10 V EMC interference immunity Acc. to EN 61000-6-2 (industrial environment) EMC interference emission Acc. to EN 61000-6-4 (industrial environment) Leakage current <= 3.5 mA Electrical leads With plug Motor protection Locked-rotor protection Protection class I Approval CCC; CSA C22.2 Nr.113; UL 507 Item no.: 50367-5-9980 · Revision: 68161 · Print-out 07/11/2011 · K. Boruzki (VI-I) · Page 2 of 5 ebm-papst Landshut GmbH · Hofmark-Aich-Str. 25 · D-84030 Landshut · Phone +49 871 707-0 · Fax +49 871 707-465 · [email protected] · www.ebmpapst.com G3G200-GN26-01 EC centrifugal fan backward curved, single inlet with housing (flange), Gas blower for gas-condensing heating Product drawing Y Detail Y Z View Z / plug assignment 1 3-pole strip to fit mating connector (not included in standard scope of delivery) Tyco No. 350766-1, female connector Tyco No. 926884-1 1.1 L 1.2 N 1.3 PE 2 5-pole strip to fit mating connector (not included in standard scope of delivery) Molex No. 39-01-4050, female connector Molex No. 39-00-0059 2.1 + 2.2 Speed monitoring 2.3 0-10 VDC 2.4 PWM input 2.5 - 3 Pressure tap optionally available Item no.: 50367-5-9980 · Revision: 68161 · Print-out 07/11/2011 · K. Boruzki (VI-I) · Page 3 of 5 ebm-papst Landshut GmbH · Hofmark-Aich-Str. 25 · D-84030 Landshut · Phone +49 871 707-0 · Fax +49 871 707-465 · [email protected] · www.ebmpapst.com G3G200-GN26-01 EC centrifugal fan backward curved, single inlet with housing (flange), Gas blower for gas-condensing heating Connection screen No. Pin Signal Function / assignment ST1 1; 2; 3 L; N; PE Power supply 115 VAC, 50 - 60 Hz, phase, neutral, protective earth ST2 1 UB External voltage 16 - 45 VDC, residual ripple +/- 3.5%, SELV ST2 2 DUE Speed monitoring, 3 pulses per revolution, SELV ST2 3 0 - 10 V Control input 0 - 10 V, impedance 100k, SELV ST2 4 PWM Control input PWM, 1 - 6 kHz, SELV ST2 5 GND Power supply 230 VAC, 50 - 60 Hz, phase, neutral, protective earth Item no.: 50367-5-9980 · Revision: 68161 · Print-out 07/11/2011 · K. Boruzki (VI-I) · Page 4 of 5 ebm-papst Landshut GmbH · Hofmark-Aich-Str. 25 · D-84030 Landshut · Phone +49 871 707-0 · Fax +49 871 707-465 · [email protected] · www.ebmpapst.com EC centrifugal fan G3G200-GN26-01 backward curved, single inlet with housing (flange), Gas blower for gas-condensing heating Charts: Air flow 50 Hz Druck psf [Pa]für Rho=1,2kg/m^3 2.900 0 100 200 qv[cfm] 400 300 500 600 700 11,5 2.800 11 2.700 10,5 2.600 4 2.500 9,5 2.300 9 2.200 8,5 2.100 3 2.000 8 1.900 7,5 1.800 6,5 sf [Pa] p 1.600 1.500 6 7 1.400 5,5 1.300 5 1.200 1.100 2 900 4 11 3,5 800 3 6 16 600 Air performance measured as per ISO 5801 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. 4,5 12 1.000 700 p sf _E[IN H2O] 7 8 1.700 2,5 15 500 2 10 400 1,5 300 14 1 9 ] 0 100 200 300 400 500 600 700 qv[m^3/h] 5 800 0,5 1 ] 13 Pa spf [ ] [Pa spf a [P spf 100 Pa] spf [ 200 0 Measurement: LU-76338 10 2.400 900 1.000 1.100 1.200 0 1.300 Measured values U f n Pe I LpAin qv psf V Hz min-1 W A dB(A) m3/h Pa 1 115 50 5700 743 8.17 86 1020 0 2 115 50 5700 800 8.70 84 840 1000 3 115 50 5700 718 7.92 81 615 2000 4 115 50 5700 585 6.53 78 400 2500 5 115 50 4700 413 4.54 81 840 0 6 115 50 4700 441 4.83 79 690 678 7 115 50 4700 397 4.38 76 505 1356 8 115 50 4700 327 3.65 74 330 1697 9 115 50 3700 202 2.22 75 660 0 10 115 50 3700 215 2.36 73 545 420 11 115 50 3700 194 2.14 71 395 841 12 115 50 3700 160 1.78 69 260 1052 13 115 50 2800 87 0.96 69 500 0 14 115 50 2800 93 1.02 66 410 240 15 115 50 2800 84 0.93 64 300 481 16 115 50 2800 69 0.77 63 195 602 Item no.: 50367-5-9980 · Revision: 68161 · Print-out 07/11/2011 · K. Boruzki (VI-I) · Page 5 of 5 ebm-papst Landshut GmbH · Hofmark-Aich-Str. 25 · D-84030 Landshut · Phone +49 871 707-0 · Fax +49 871 707-465 · [email protected] · www.ebmpapst.com