Photo IC diode assemblies S10108, S10109 For flame eye, using photo IC diode instead of CdS cell The S10108 and S10109 sensors are designed specifically for flame detection (flame eye) in oil-fired hot water boilers and heaters. These sensors incorporate a photo IC diode instead of CdS cells and are available with 2 types of incident light direction (head-on type S10108: and side-on type: S10109). Each sensor is assembled in an easy-to-install package along with the cable. Features Applications Spectral response suitable for detecting oil burner Flame detection in oil boilers and heaters Easy-to-install assembly with cable Safety devices and alarms for heat generating devices Little variation in output current and good linearity (in comparison with conventional types using phototransistors and CdS cells) Photorelay control devices Absolute maximum ratings (Ta=25 °C unless otherwise noted) Parameter Maximum reverse voltage Photocurrent Forward current Power dissipation*1 Operating temperature*2 Storage temperature*2 Symbol VR max IL IF P Topr Tstg Value -0.5 to +12 5 5 250 -30 to +80 -40 to +85 Unit V mA mA mW °C °C *1: Power dissipation decreases at a rate of 3.3 mW/°C above Ta=25 °C *2: No dew condensation When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. www.hamamatsu.com 1 Photo IC diode assemblies S10108, S10109 Electrical and optical characteristics (Ta=25 °C) Parameter Spectral response range Peak sensitivity wavelength Dark current S10108 Photocurrent S10109 Symbol λ λp ID IL Rise time*3 tr Fall time*3 tf Condition Min. VR=5 V VR=5 V, 2856 K, 100 lx Max. 0.16 0.17 Typ. 300 to 820 560 1.0 0.26 0.27 - 6.0 - ms - 2.5 - ms 10 to 90%, VR=7.5 V RL=10 kΩ, λ=560 nm 10 to 90%, VR=7.5 V RL=10 kΩ, λ=560 nm 50 0.36 0.37 Unit nm nm nA mA *3: Rise/fall time measurement method Pulsed light from LED (λ=560 nm) 2.5 V 90 % VO 10 % 0.1 μF 7.5 V tr tf VO Load resistance RL KPICC0041EA Spectral response Linearity (Typ. Ta=25 °C, VR=5 V) 1.0 (Typ. Ta=25 °C, VR=5 V, 2856 K) 10 mA 0.9 1 mA 0.7 100 μA Photocurrent Relative sensitivity 0.8 0.6 0.5 0.4 10 μA 1 μA 0.3 0.2 100 nA 0.1 0 200 400 600 800 1000 1200 10 nA 0.1 1 10 100 1000 Illuminance (lx) Wavelength (nm) KPICB0101EA KPICB0086EB 2 Photo IC diode assemblies S10108, S10109 Rise/fall times vs. load resistance 100 (Typ. Ta=25 °C, VR=7.5 V, λ=560 nm, Vo=2.5 V) Rise time Rise/fall times (ms) 10 1 Fall time 0.1 0.01 100 1k 10 k 100 k 1M Load resistance (Ω) KPICB0077EB Operating circuit examples Example 1 Vout R Output voltage (Vout) IL Output example V CL R Vout IL Illuminance (lx) Output voltage (Vout) Output example V CL Example 2 Illuminance (lx) Vout = V - (IL × R) Vout = IL × R KPICC0125EA KPICC0126EA Note: · The photo IC diode has a specific polarity (anode/cathode). Be careful to make the correct connection. · The photo IC diode must be reverse-biased so that a positive potential is applied to the cathode. · Set load resistance R by taking the latter circuit into account. · To eliminate high-frequency components, we recommend placing a load capacitance CL in parallel with load resistance RL as a lowpass filter. 1 Cutoff frequency fc ≈ 2πCLRL · Before using, check whether noise is present in the location where this product is used. Take measures to prevent noise as needed, for example, by shielding the cable or adding a capacitor (about 0.1 μF between the anode and cathode of the photo IC diode). 3 Photo IC diode assemblies S10108, S10109 Dimensional outlines (unit: mm) S10108 (head-on type) S10109 (side-on type) 44 34 34 Photo IC diode 17 8 17 8 4.5 4.5 44 6.5 6.5 ϕ9.5 max. ϕ9.5 max. 8.2 2.4 ϕ6 7 ϕ7 26 9 Input light 4 2 2-conductor flat cable ϕ15 2 2-conductor flat cable 4 23 23 4 4 22 13.5 3.8 6.5 8.5 Photo IC diode 20.5 Input light 650 –0 +50 650 –0 +50 ϕ15 Tolerance unless otherwise noted ≤6 : ±0.1 6< ≤30: ±0.2 30< : ±0.3 Tolerance unless otherwise noted ≤6 : ±0.1 6< ≤30: ±0.2 30< : ±0.3 KPICA0069EB KPICA0068EB 2-conductor flat cable Color White With red line Conductor cross-section area 0.3 mm2 0.3 mm2 Dimension Pin connection ϕ1.6 mm ϕ1.6 mm Anode Cathode Note (use in flame detection): · This product is not waterproof. · These products have a shape designed for specific use in flame detection applications. Before using, however, please test these products in actual equipment to ensure their characteristics and reliability. 4 Photo IC diode assemblies S10108, S10109 Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer Information described in this material is current as of April, 2016. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KPIC1066E04 Apr. 2016 DN 5