Download Specifications

Toggles
Series JS02 & JS04
Rockers
General Specifications
Electrical Capacity (Resistive Load)
Pushbuttons
25mA @ 24V DC
0.1A @ 50V DC
Keylocks
Programmable Illuminated PB
Other Ratings
JS02 Extended Actuator
JS04 Flush Actuator
50 milliohms maximum
100 megohms minimum @ 100V DC
300V AC minimum for 1 minute minimum
2,000 operations minimum
2,000 operations minimum
.026” (0.65mm)
Contact Resistance: Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Total Travel: 50 milliohms maximum 100 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
2,000 operations minimum 2,000 operations minimum
.031” (0.8mm)
Materials & Finishes
JS02 Extended Actuator
JS04 Flush Actuator
Actuator: Glass fiber reinforced polyamide
Glass fiber reinforced polyamide Cover: Glass fiber reinforced polyamide (UL94V-0)
Glass fiber reinforced polyamide (UL94V-0)
Base: Glass fiber reinforced polyamide (UL94V-0)
Glass fiber reinforced polyamide (UL94V-0)
Contacts: Beryllium copper with gold plating
Copper alloy with gold plating
Terminals: Brass with gold plating
Brass with gold plating
Rotaries
Slides
Switching Rating:
Nonswitching Rating:
H
Environmental Data
Operating Temp Range: JS02 Extended Actuator: –20°C through +70°C (–4°F through +158°F)
JS04 Flush Actuator:
–30°C through +85°C (–22°F through +185°F)
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Tilt
Tactiles
Ultra-Miniature SMT DIP Slides
Soldering: Cleaning:
Reflow Soldering Recommended. See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Note: Switches are packaged in OFF position and should be soldered in OFF position.
These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
Flammability Standards: UL 94V-0 rated cover & base
The JS Series slides have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current circuit.
When used as intended in a low-voltage, low-current circuit, the results do not produce hazardous
energy.
Supplement
Accessories
Indicators
Touch
PCB Processing
H24
www.nkk.com
Toggles
Series JS02 & JS04
Ultra-Miniature SMT DIP Slides
Rockers
Distinctive Characteristics
Pushbuttons
Extended and flush slide actuators available.
Programmable Illuminated PB
Twin sliding contact mechanism with self-cleaning action (JS02)
provides smooth actuation and produces high contact reliability.
Gold plated contacts prevent oxidation and sulfide effect
and provide stable contact resistance.
Keylocks
Use of self-extinguishing UL94V-0 certified material
in cover and base provides high arc resistance and
high insulation resistance.
Terminal spacing conforms to standard PCB grid.
For JS02: .100” (2.54mm)
For JS04: .050” (1.27mm)
H
Tactiles
End-to-end stackable.
Slides
Rotaries
Gull-wing terminals ensure secure PCB mounting
and prevent dislodging during vapor phase and
infrared convection reflow soldering.
Tilt
Packaged in tape-reel or stick-tube. Tape-reel packaging meets
EIA-481-D Standard.
Indicators
Touch
Coplanarity: all considered surfaces must lie between two parallel planes
that are a maximum distance apart of .0059” (0.15mm). (Additional
coplanarity details in Terms and Acronyms in the Supplement section.)
Accessories
Actual Sizes
JS02
www.nkk.com
Supplement
JS04
H25
Toggles
Series JS02 & JS04
Ultra-Miniature SMT DIP Slides
Rockers
TYPICAL SWITCH ORDERING EXAMPLE
02
08
A
P4
S
Programmable Illuminated PB
Pushbuttons
JS
Mounting
SMT .100” (2.54mm)
for Extended Actuator
04
SMT .050” (1.27mm)
for Flush Actuator
A
Extended for 02
Mounting Code
F
Flush for 04
Mounting Code
Packaging
S
Stick-Tube
R
Tape-Reel
Not available in bulk
No. Of Positions
H
04
4 Positions
08
8 Positions
Contact Material
& Rating
P4
Gold Rated
25mA @ 24V DC
Tactiles
Slides
Rotaries
Keylocks
02
Actuator
Tilt
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Touch
JS0208AP4-S
Indicators
Extended Slide Actuator, 8 Positions
SPST OFF-ON Circuit
Accessories
.100” (2.54mm) Terminal Spacing
Gold Contacts with 25mA Rating
Supplement
Stick-Tube Packaging
H26
www.nkk.com
Toggles
Series JS02 & JS04
Ultra-Miniature SMT DIP Slides
TYPICAL SWITCH DIMENSIONS
Single Pole
4 Positions • Extended Actuator
3
4
(0.8) Travel
.031
(11.1)
.437
(0.3)
.012
(0.25)
.010
(2.54) Typ
.100
5
(7.62)
.300
(1.1) Typ
.043
1
2
3
4
5
6
7
8
8
(8.9)
.350
1
(0.7)
.028 (0.5) Typ
.020
7
(9.8)
.386
(1.0)
.039
(0.6)
.024
(3.7)
.146
6
(1.5) Typ
.059
Pushbuttons
2
2
(0.8)
.031
3
4
(1.1) Typ
.043
(7.62)
.300
Programmable Illuminated PB
1
(1.8)
.071
Rockers
ON
(6.2)
.244
(2.54) Typ
.100
(7.62)
.300
End View
Schematic
Single Pole
JS0204AP4
8 Positions • Extended Actuator
ON
(6.2)
.244
3
4
6
5
7
8
(0.8) Travel
.031
(21.26)
.837
(0.3)
.012
(2.54) Typ
.100
(0.25)
.010
9
(7.62)
.300
(1.1) Typ
.043
(0.7)
.028
(0.5) Typ
.020
(1.0)
.039
(0.6)
.024
(2.54) Typ
.100
(17.78)
.700
11
12
13
14
15
1
16
2
2
3
(0.8)
.031
4
5
6
7
8
(17.78)
.700
(1.26)
.050
5
6
7
8
Schematic
Single Pole
(0.7) Typ
.028
4
9 10 11 12 13 14 15 16
(1.1) Typ
.043
End View
JS0208AP4
4 Positions • Flush Actuator
H
ON
5 6 7 8
(5.8)
.228
(6.22)
.245
(7.65)
.301
(8.1)
.319
(0.15)
.006
(0.1)
.004
(0.5) Typ
.020
(3.81)
.150
(0.6)
.024
3
4
5
6
7
8
(3.81)
.150
Schematic
Single Pole
.028
JS0404FP4
8 Positions • Flush Actuator
(5.8)
.228
(11.3)
.445
(2.2)
.087
(0.1)
.004
(0.5) Typ
.020
(1.27) Typ
.050
(8.89)
.350
(1.25) Typ
.049
(1.27) Typ
.050
(0.35)
.014
9 10 11 12 13 14 15 16
(8.1)
.319
(7.65)
.301
1
2
3
4
5
6
7
8
Accessories
(0.65) Travel
.026
Indicators
ON
1 2 3 4 5 6 7 8
(0.65)
.026
(0.76) Typ
.030
End View
(0.7) Typ
(1.26)
.050
2
1 2 3 4
(2.2)
.087
(1.27) Typ
.050
1
Tactiles
(0.65)
.026
(1.25) Typ
.049
(1.27) Typ
.050
(0.35)
.014
Tilt
(0.65) Travel
.026
1 2 3 4 5 6 7 8
(0.15)
.006
(0.6)
.024
(0.76) Typ
.030
9 10 11 12 13 14 15 16
(8.89)
.350
Schematic
End View
www.nkk.com
Touch
1 2 3 4
Supplement
3
(8.9)
.350
(9.8)
.386
1
(3.7)
.146
10
(1.5) Typ
.059
Keylocks
2
Rotaries
1
(1.8)
.071
Slides
JS0408FP4
H27
Toggles
Series JS02 & JS04
PACKAGING
Rockers
S
Stick-Tube Packaging
Pushbuttons
Switches are packaged in OFF position.
Switches are not available in bulk and must
be ordered in the following increments:
Programmable Illuminated PB
Extended Actuator
JS0204AP4-S: 46 pieces per stick-tube
JS0208AP4-S: 24 pieces per stick-tube
(7.0)
.276
(530.0)
20.866
(12.0)
.472
Keylocks
Flush Actuator
JS0404FP4-S: 80 pieces per stick-tube
JS0408FP4-S: 45 pieces per stick-tube
(4.8)
.189
(530.0)
20.866
Rotaries
(11.5)
.453
R
Tape-Reel Packaging for Extended Actuator
(1.75)
.069
(2.0) Typ
.079
(11.5)
.453
3°
1
2
(24.0)
.945
(2.0) Typ
.079
Tilt
(1.75)
.069
Touch
(0.35)
.014
Direction of Feed
(5.0)
.197
Tape Dimensions for JS0204AP4-R
Tape-reel packaging meets EIA-481-D Standard.
(6.5) R
.256
(16.0) Typ
.630
(1.5) Dia Typ
.059
(4.0) Typ
.157
3°
2
3
(10.5) Typ
.413
ON
(14.25) Typ
.561
1
(80.0) Dia
3.150
(80.0) Dia
3.150
5
6
(6.0)
.236
7
(32.0)
1.260
8
(2.0) Typ
.079
(21.7)
.854
4
(2.0) Dia Typ
.079
Accessories
Indicators
4
(6.5)
.256
(10.3)
.406
Minimum Leader Length: 15.75” (400mm)
Minimum Trailer Length: 6.3” (160mm)
(11.5)
.453
3
(2.5)
.098
(1.5) Dia Typ
.059
JS0204AP4-R: 500 pieces per tape-reel
JS0208AP4-R: 500 pieces per tape-reel
(1.5) Dia Typ
.059
(4.0) Typ
.157
(16.0) Typ
.630
ON
Switches are packaged in OFF position.
Switches are not available in bulk and must
be ordered in the following increments:
H
Tactiles
Slides
Ultra-Miniature SMT DIP Slides
Supplement
Overall Dia (330.0)
13.0
Reel Dimensions
H28
(24.4)
.961
(30.4) Max
1.197
(32.4)
1.276
JS0204AP4-R
(38.4) Max
1.512
JS0208AP4-R
www.nkk.com
(6.0)
.236
(10.3)
.406
Direction of Feed
(1.7) Typ
.067
(0.35)
.014
(1.5) Typ
.059
Tape Dimensions for JS0208AP4-R
(5.0)
.197
Toggles
Series JS02 & JS04
PACKAGING (CONTINUED)
(4.0) Typ
.157
(11.5)
.453
(1.5) Dia Typ
.059
5°
(24.0)
.945
1 2 3 4
Minimum Leader Length: 15.75” (400mm)
Minimum Trailer Length:
6.3” (160mm)
(12.0) Typ
.472
(2.3)
.091
(1.5) Dia Typ
.059
(4.0)
.157
(8.7)
.343
Tape-reel packaging meets EIA-481-D Standard.
(6.6)
.260
ON
JS0404FP4-R: 2,000 pieces per tape-reel
JS0408FP4-R: 2,000 pieces per tape-reel
(2.0) Typ
.079
Rockers
Switches are packaged in OFF position.
Switches are not available in bulk and must
be ordered in the following increments:
(1.75)
.069
Pushbuttons
Tape-Reel Packaging for Flush Actuator
Programmable Illuminated PB
R
(0.3)
.012
Direction of Feed
(2.7)
1.06
Tape Dimensions for JS0404FP4-R
5°
(24.0)
.945
(2.3)
.091
(1.5) Dia Typ
.059
(2.0) Typ
.079
Overall Dia (330.0)
13.0
(11.5)
.453
1 2 3 4 5 6 7 8
(80.0) Dia
3.150
(24.4)
.961
(4.0)
.157
(8.7)
.343
(30.4) Max
1.197
(1.5) Dia Typ
.059
Direction of Feed
ON
(10.5) Typ
.413
(4.0) Typ
.157
Keylocks
(6.5) R
.256
(12.0) Typ
.472
(11.7)
.461
Rotaries
(1.75)
.069
(2.0) Typ
.079
(0.3)
.012
(2.7)
1.06
H
Tape Dimensions for JS0408FP4-R
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
Reel Dimensions for JS0404FP4-R & JS0408FP4-R
Slides
Ultra-Miniature SMT DIP Slides
www.nkk.com
H29
Similar pages