Download Specifications

A
Process Sealed Subminiature Toggles
General Specifications
Electrical Capacity (Resistive Load)
Logic Level: 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
Other Ratings
Contact Resistance: Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Contact Timing:
Angle of Throw: Materials & Finishes
Toggle:
Case Housing:
Support Bracket:
Movable Contact:
Stationary Contacts:
Terminals:
Environmental Data
Operating Temperature Range:
Humidity: Vibration:
Shock:
50 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum between contacts for 1 minute minimum;
500V AC minimum between contacts & case for 1 minute minimum
100,000 operations minimum for On-None-On & On-Off-On
50,000 operations minimum for other circuits
50,000 operations minimum
1.47N (momentary); 1.18N (maintained) for .394” (10.0mm) toggles
2.73N (momentary); 1.84N (maintained) for all other toggles
Nonshorting (break-before-make)
26°
Glass fiber reinforced polyamide for antistatic; nickel plated brass for all others
Glass fiber reinforced polyamide
Tin plated phosphor bronze
Phosphor bronze with gold plating
Brass with gold plating
Brass with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
PCB Processing
Soldering: Wave Soldering Recommended. See Profile A in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Cleaning: Automated cleaning. See Cleaning Specifications in Supplement section.
Standards & Certifications
The A Series toggles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
Supplement
Accessories
Indicators
Touch
Tilt
Tactiles
Slides
Rotaries
Keylocks
Programmable Illuminated PB
Pushbuttons
Rockers
Toggles
Series A
A4
www.nkk.com
A
Rockers
Distinctive Characteristics
Toggles
Series A
Process Sealed Subminiature Toggles
Pushbuttons
Subminiature size saves space on PC boards.
Programmable Illuminated PB
Specifically developed for logic-level applications.
Totally sealed body construction prevents contact contamination
and allows time- and money-saving automated soldering and
cleaning.
Keylocks
Award-winning STC contact mechanism with
benefits unavailable in conventional mechanisms:
smoother, positive detent actuation, increased
contact stability and unparalleled logic-level
reliability. (Additional STC details in Terms &
Acronyms; see Supplement contents.)
Slides
Rotaries
Molded-in, epoxy sealed or ultrasonically
welded terminals lock out flux, solvents,
and other contaminants.
Tactiles
.100” x .100” (2.54mm x 2.54mm) terminal
spacing conforms to standard PC board grid
spacing.
Tilt
Toggle option in antistatic material available for
dissipating electrostatic discharges.
Touch
Matching indicators available.
Supplement
Accessories
Indicators
Actual Size
www.nkk.com
A5
Process Sealed Subminiature Toggles
A
TYPICAL SWITCH ORDERING EXAMPLE
Rockers
Toggles
Series A
1
2
J
V
Programmable Illuminated PB
Pushbuttons
A
Poles
Toggles
1
SPST
SPDT
2
DPDT
SP3T
.394” (10.0mm) Bat
G
.394” (10.0mm) Bat Lever Cap
J
.248” (6.3mm) Bat
J
.248” (6.3mm) Bat Lever Cap
J2
.248” (6.3mm) Antistatic Bat
E
.394” (10.0mm) Flatted
H
.248” (6.3mm) Flatted
A
Short Paddle for K Toggle
Snap Top for A or B Paddle
B
Long Paddle for K Toggle
K
Keylocks
Optional Caps
A
Paddles
Tactiles
Slides
Rotaries
Circuits
1
OFF
NONE
ON
2
ON
NONE
ON
3
ON
OFF
ON
5
ON
NONE
(ON)
R
(ON)
NONE
ON
8
(ON)
OFF
9
ON
S
PC Terminals
P
Straight
B
Straight with Bracket
Cap
Colors
Tilt
Black
A
B
White
B
Straight with Inline Bracket
(Single Pole only)
C
Red
C
(ON)
H
Right Angle with Bracket
---
Yellow
E
OFF
(ON)
V
Vertical with Bracket
---
Green
F
(ON)
OFF
ON
---
Blue
G
*4
ON
ON
ON
Vertical with Inline Bracket
(Single Pole only)
---
Gray
H
*6
(ON)
ON
(ON)
ON
ON
(ON)
V1
( ) = Momentary
Touch
* 3-ON circuits
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Indicators
A12JV
.248” (6.3mm) Long
Bat Toggle
Accessories
A
B1
*7
Vertical PC Terminals
Supplement
SPDT
ON-NONE-ON Circuit
A6
Paddle
Colors
www.nkk.com
A
POLES & CIRCUITS
Up
Center
Down
Note:
Pole
Model
SP
A11
OFF
NONE
ON
OPEN
OPEN
3-1
SPST
SP
A12
A13
A15
A1R
A18
A19
A1S
ON
ON
ON
(ON)
(ON)
ON
(ON)
NONE
OFF
NONE
NONE
OFF
OFF
OFF
ON
ON
(ON)
ON
(ON)
(ON)
ON
2-3
OPEN
2-1
SPDT
A22
A23
A25
A2R
A28
A29
A2S
ON
ON
ON
(ON)
(ON)
ON
(ON)
NONE
OFF
NONE
NONE
OFF
OFF
OFF
ON
ON
(ON)
ON
(ON)
(ON)
ON
2-3 5-6
DP
Slot
Slot
Terminal numbers are
not actually on the switch.
1
3
INTERNAL
CONNECTION
2 (COM)
3
OPEN
2-1 5-4
Rockers
Down
Pushbuttons
Center
Throw & Schematics
Programmable Illuminated PB
Up
Connected Terminals
1
2
DPDT
(COM)
3
1
5
6
4
Keylocks
Toggle Position
( ) = Momentary
Toggles
Series A
Process Sealed Subminiature Toggles
Connected Terminals & Schematics
External Connection
Up
Center
Down
SP
A24
A26
A27
ON
(ON)
ON
ON
ON
ON
ON
(ON)
(ON)
External
Connection
2 (in)
5
1 (out)
1 (out)
3 4 (out) 6 (out)
2-3 5-6
The SP3T model utilizes
a double pole base.
3 4 (out) 6 (out)
3 4 (out) 6 (out)
1 (out)
2-3 5-4
(out)
(out)
External
Connection
2 (in)
5
2-1 5-4
External
connections
must be made
during field
installation.
Common
(in)
Slides
Model
1
4
2
5
3
6
External
Conn
Tactiles
Pole
External
Connection
2 (in)
5
Rotaries
For 3 Throw (3-on)
(out)
Tilt
TOGGLES
J
.394” (10.0mm) Bat
J2
.248” (6.3mm) Bat
.248” (6.3mm) Antistatic Bat
26°
(6.3)
.248
H
.394” (10.0mm) Flatted
26°
(1.6)
.063
(10.0)
.394
(2.6) Dia
.102
Dissipating 10Kv ESD: Straight PC
with Bracket, Right Angle, & Vertical
K
.248” (6.3mm) Flatted
(2.7)
.106
26°
(6.3)
.248
26°
(1.6)
.063
(2.1) Dia
.083
Snap Top for Paddles
(2.6)
.102
26°
(5.0)
.197
www.nkk.com
(6.3)
.248
Accessories
(10.0)
.394
E
Dissipating 20Kv ESD: Straight PC
26°
(1.6)
.063
(2.5)
.098
Supplement
(2.6) Dia
.102
Indicators
A
Touch
Standard Material & Finish: Brass with Bright Nickel Material & Finish for J2: Matte finish black glass fiber reinforced polyamide
A7
Toggles
Series A
Process Sealed Subminiature Toggles
A
PC TERMINALS
Rockers
Use of a support bracket is recommended to increase PCB mounting strength and stability.
P
B
Straight
B1
Straight with Bracket
Straight with Inline Bracket
Single Pole only
Pushbuttons
(10.16)
.400
(2.54) Typ
.100
(5.08) Typ
.200
Programmable Illuminated PB
(5.08)
.200
(5.08)
.200
(0.3) Typ
.012
(0.6) Dia Typ
.024
(10.16)
.400
(2.54)
.100
(0.3) Typ
.012
(2.54) Typ
.100
(0.6) Dia Typ
.024
(0.7) Typ
.028
(2.54) Typ
.100
(0.6) Dia Typ
.024
(0.7) Typ
.028
(0.8)
.031
(1.0)
.039
CL
(9.0)
.354
Keylocks
H
(9.0)
.354
(8.8)
.346
Right Angle
with Bracket
V
(5.08)
.200
(2.54) Typ
.100
(5.08)
.200
(0.3)
.012
Rotaries
(5.08)
.200 (0.3)
.012 (0.7)
.028
(0.5)
.020
Vertical with Inline Bracket
Single Pole only
(0.6) Dia Typ
.024
(0.5) Typ
.020
(0.6) Dia Typ
.024
(0.5) Typ
.020
(2.54) Typ
.100
(5.08)
.200
(0.3)
.012
(0.7)
.028
(9.0)
.354
(9.0)
.354
Slides
(8.8)
.346
V1
Vertical with Bracket
(2.54) Typ
.100 (0.6) Dia Typ
.024
(2.54) Typ
.100
(5.08)
.200
(9.0)
.354
(8.8)
.346
(0.7)
.028
CL
(9.0)
.354
(8.8)
.346
(1.0)
.039
(5.08)
.200
CAPS & PADDLES
Tactiles
G
AT4003
.394” (10.0mm) Bat Lever Cap
J
AT4064
.248” (6.3mm) Bat Lever Cap
26°
(3.0) Dia
.118
Touch
Tilt
Material: PVC
Colors Available:
A, B, C
A
(11.0)
.433
AT467
Short Paddle
B
(4.6)
.181
(2.4)
.094
Accessories
Material: Polyamide
Colors Available:
A, B, C, E, F, G, H
(3.0) Dia
.118
Material: PVC
Colors Available:
A, B, C
(10.0)
.394
26°
Indicators
26°
AT468
Long Paddle
(6.3)
.248
26°
(4.4)
.173
(2.4)
.094
(5.0)
.197
(15.1)
.594
Material: Polyamide
Colors Available:
A, B, C, E, F, G, H
(9.4)
.370
(10.3)
.406
(7.0)
.276
(5.0) Dia
.197
Supplement
Color Codes:
A
A8
Black
B
White
C
Red
E
Yellow
www.nkk.com
F
Green
G
Blue
H
Gray
(14.2)
.559
A
TYPICAL SWITCH DIMENSIONS
Rockers
(0.6) Dia Typ
.024
(5.84)
.230
(10.0)
.394
(2.54) Typ
.100
(3.1)
.122
(0.5)
.020
(13.1)
.516
CL
(1.0)
.039
(5.08)
.200
CL
A12AP
A11 models do not have Terminal 2
Double Pole
(0.6) Dia Typ
.024
(2.6) Dia
.102
(0.4) Typ
.016
(6.0)
.236
26°
Slot
(3.5)
.138
(10.0)
.394
(0.4)
.016
(9.2)
.362
Straight PC
1
4
2
5
3
6
(2.54) Typ
.100
(3.1)
.122
(0.8)
.031
(13.1)
.516
(9.8)
.386
4
1
5
2
6
3
(5.08)
.200
(2.54) Typ
.100
(0.8) Dia Typ
.031
(5.08)
.200
Rotaries
(5.0)
.197
A22AP
Single Pole
(5.0)
.197
(2.6) Dia
.102
(6.0)
.236
(0.3) Typ
.012
(0.6) Dia Typ
.024
Slot
(0.3)
.012
(4.5)
.177
(5.84)
.230
(10.0)
.394
(0.5)
.020
(13.1)
.516
(0.7) Typ
.028
1
(10.16)
.400
26°
2
3
(2.54) Typ
.100
(3.1)
.122
Straight PC • Bracket
(1.0)
.039
1
(9.8)
.386
(2.54) Typ
.100
2
3
(1.0)
.039
(2.54)
CL .100
CL
(1.0)
.039
1
2
3
(0.8) Dia Typ
.031
(2.54)
.100
CL
B Terminals
Double Pole
(2.6) Dia
.102
(5.0)
.197
(6.0)
.236
(0.3) Typ
.012
Slot
(0.4)
.016
(9.5)
.374
(3.5)
.138
(10.0)
.394
(0.8)
.031
(13.1)
.516
B1 Terminals
A12AB
Straight PC • Bracket
(0.6) Dia Typ
.024
(10.16)
.400
26°
(2.54) Typ
.100
(0.8) Dia Typ
.031
Tilt
Pushbuttons
(4.5)
.177
(5.08)
.200
1
4
2
5
3
6
(2.54) Typ
.100
(3.1)
.122
(9.8)
.386
4
1
5
2
6
3
(0.7) Typ
.028
(5.08)
.200
www.nkk.com
Slides
(0.3)
.012
Tactiles
Slot
(2.54) Typ
.100
(0.8) Dia Typ
.031
3
Programmable Illuminated PB
2
3
2
Keylocks
26°
(9.8)
.386
Touch
(6.0)
.236
(1.0)
.039
1
1
Indicators
(2.6) Dia
.102
(0.4) Typ
.016
Straight PC
(2.54) Typ
.100
Accessories
(5.0)
.197
Single Pole
(0.8) Dia Typ
.031
Supplement
Toggles
Series A
Process Sealed Subminiature Toggles
A22AB
A9
Toggles
Series A
Process Sealed Subminiature Toggles
A
TYPICAL SWITCH DIMENSIONS
Rockers
Right Angle PC
Single Pole
26°
(0.3)
.012
(2.6) Dia
.102
(0.8)
.031
Slot
(3.3)
.131
(5.0)
.197
(0.3) Typ
.012
(5.08)
.200
3
(0.7)
.028
(10.0)
.394
(9.8)
.386
(9.38)
.369
(4.5)
.177
(6.18)
.243
2 1
(3.1)
.122
(5.08)
.200
1
2
3
(2.54) Typ
.100
(5.08)
.200
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(2.54) Typ
.100
A12AH
Right Angle PC
Double Pole
(6.0)
.236
Keylocks
Programmable Illuminated PB
Pushbuttons
(6.0)
.236
(0.4)
.016
(2.6) Dia
.102
(0.8)
.031
Slot
(5.0)
.197
Rotaries
(0.3) Typ
.012
(5.08)
.200
(5.2)
.205
(3.5)
.138
(9.8)
.386
(10.0)
.394
(0.7)
.028
(5.08)
.200
(16.4)
.646
(2.54)
.100
3
2
1
6
5
4
(10.0)
.394
1
2
(2.54) Typ
.100
(2.54)
3
.100
4
5
6
(5.08)
.200
(3.1)
.122
(0.5)
.020
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(2.54) Typ
.100
Slides
A22AH
Vertical PC
Single Pole
(0.8)
.031
(2.6) Dia
(5.0)
(0.4)
.102
.197
Tactiles
.016
26°
Slot
(4.5)
.177
3
(0.5)
.020
(1.0)
(3.1)
.039
.122
(2.54) Typ
.100
(2.54)
.100
(2.54)
.100
(10.0)
.394
(10.2)
.402
2
(5.3)
.208
(0.7) Typ
.028
(0.3) Typ
.012
(2.54)
.100
(5.84)
.230
Tilt
1
1
(6.0)
.236
(14.46)
.569
(0.6) Dia Typ
.024
(1.0)
.039
(5.08)
.200
Touch
Indicators
(0.4) Typ
.016
(6.0)
.236
Accessories
3
(1.0)
.039
(2.54) Typ
.100
(5.08)
.200
(0.8) Dia Typ
.031
(2.54)
.100
(0.8) Dia Typ
CL .031
CL
V1 Terminals Double Pole
(5.0)
.197
(0.3) Typ
.012
(5.08)
.200
(0.8)
.031
(2.6) Dia
.102
26°
Slot
Supplement
2
3
V Terminals
Vertical PC
1
2
CL
A12AV
(5.3)
.208
(3.5)
.138
(9.5)
.374
(10.0)
.394
(0.7)
.028
(5.08)
.200
(18.95)
.746
A22AV
A10
(1.0)
.039
(2.54) Typ
.100
(0.5)
.020
(1.0)
.039
(2.54) Typ
.100
(3.1)
.122
1
4
2
5
3
6
(10.2)
.402
4
1
5
2
6
3
(5.08)
.200
(2.54) Typ
.100
(5.08)
.200
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(5.08)
.200
www.nkk.com
Similar pages