Download Specifications

OLED Programmable
Rocker Switch
1009
OLED SMARTSWITCH Rocker
TM
DISTINCTIVE CHARACTERISTICS
• White monochrome OLED featuring sharp contrast and high resolution with 96 x 64 pixels
• Wide viewing angle of 180° and large 0.92” display with exceptional contrast
• Organic LED technology in display rocker (patent pending)
• Multifunction programmable device: select with rocker, push for activation
• All-in-one solution: replaces multiple switches and displays with one device in a small package
• Easy navigation through structured menus, both forward and reverse and up and down
• Waterprotected and dust tight; conforms to IP64 of IEC60529 Standards on panel surface
• Displays up to 8 lines with 16 characters 5 x 7 each, or 5 lines with 12 characters 7 x 10 each
• Graphics and animations
• Long life OLED with 52,000 hours at 30% illumination
• Panel mount with easy snap-in installation
• Short 14.6mm (.575”) behind-panel depth for compact spaces
• Commands and data supplied via serial communications protocol (SPI)
• Stylish black housing design with matte finish complements any application
• High reliability and long mechanical and electrical life of one million actuations minimum
APPLICATIONS
Application Specific Keyboards
Medical
Aerospace and Military
Process Control
Broadcast Panels
Real Time Data Monitoring
Configuration Menus
Security Systems
Factory Automation
Simulation
Lighting/Stage/Theater Controls
Test Equipment
Actual Size
Machine Control/Robotics
www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected]
2
OLED SMARTSWITCH Rocker
TM
PRODUCT OVERVIEW
NKK provides several options for ease of prototyping. The OLED Rocker Kit IS18WWC1W-K includes all items
that are needed for a quick start of any project. The IS-DEV Kit-8 is a complete kit for demonstration with preprogrammed option or to be operated with customized graphics.
All items below can also be purchased separately to accomodate customers’ needs.
Part Number
Description
OLED Rocker Kit: SP3T Switch
Rocker (ON) (ON) (ON)
IS18WWC1W-K
Pushbutton Normally OFF
Packaged with Charge Pump IS-CHPMP,
AT715 Connector Cable,
AT097 PCB Connector
OLED Rocker Switch: SP3T Switch
IS18WWC1W
Rocker (ON) (ON) (ON)
Pushbutton Normally OFF
AT 715
Connector Cable with
(2) JST 12SUR-32S Connectors
(500.0) +50.0
– 0.0
19.685
IS-CHPMP
Charge Pump
Voltage Booster
Input: 2.7~5.5V
Output: 16V
Meets all OLED power requirements
AT 097
PCB Connector
Female SMT Connector
JST BM12B-SURS
Plug and play Dev Kit
Ready to use
Pre-programmed for instant demo
Easy creation, testing and display for
rapid prototype designs
IS-DEV Kit-8
www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected]
3
OLED SMARTSWITCH Rocker
TM
SWITCH SPECIFICATIONS
Circuit
Electrical Capacity (Resistive Load)
Single Pole Three Throw (Momentary)
Top
Center
Normal
Down
Normal
Down
OFF
(ON) 9-12
OFF
(ON) 10-12
3VA maximum DC
Contact Resistance
200 milliohms maximum
Insulation Resistance
500 megohms minimum @ 250V DC
Dielectric Strength
250V AC for 1 minute minimum
Electrostatic Resisting Pressure
15kV minimum
Mechanical Endurance
1,000,000 operations minimum
Electrical Endurance
1,000,000 operations minimum
Operating Force
6.0 Newtons at center of cap
Total Travel
1.4mm (.055”) at center of cap
Contact Position
Normal
OFF
Bottom
Down
(ON) 11-12
OLED SPECIFICATIONS
Characteristics of Display
Display Device
Single color OLED display
Display Mode
Passive matrix
Pixel Format
96 x 64 pixels (horizontal x vertical)
Pixel Size
0.16mm x 0.177mm (horizontal x vertical)
Interface
Serial (SPI) interface
Color
White/Black (normally White)
Splash & Dust Proof
Conforms to IP64 of IEC60529 standards on panel surface
Operating Temperature Range
–20°C ~ +70°C (–4°F ~ +158°F)
Storage Temperature Range
–25°C ~ +80°C (–13°F ~ +176°F)
Operating Life Time (Display)
52,000 hours (30% brightness); 15,600 hours (100% brightness)
Absolute Maximum Ratings (Temperature at 25°C)
Recommended Operating Conditions
Items
Symbols
Supply Voltage for
Logic/Interface
VDDA
Ratings
Items
–0.3V to +3.6V
Supply Voltage for
Logic/Interface
Symbols
Minimum
Typical
Maximum
VDDA
2.7V
2.8V
2.9V
Supply Voltage for Drive
VAH
–0.3V to +18.0V
Supply Voltage for Drive
VAH
14.5V
15.0V
15.5V
Input Voltage
Vin
–0.3V to VDDA +0.3V
Input High Level Voltage
VI H
0.75 x VDDA
––
VDDA
Input Low Level Voltage
VI L
0.0
––
0.25V x VDDA
Current Consumption
(Temperature at 25°C, VDDA = 2.8V, VAH = 15.0V)
Items
Symbols Min Typical
Optical Characteristics
Max
All-Pixels-On Mode
*Drive System Power Current
I H1
–– 11.0mA 13.2mA
All-Pixels-On Mode
*Logic/IF System Power Current
I DD1
–– 0.58mA 0.72mA
Sleep Mode
**Drive System Power Current
I H2
––
––
10μA
Sleep Mode
**Logic/IF System Power Current
I DD2
––
––
10μA
* All pixels shall be turned on with the maximum level gray scale
** All pixels shall be turned off (while chip is operating)
(Temperature at 25°C, Initial Value: depends on initial setting)
Items
Minimum
Typical
Maximum
75 cd/m2
100 cd/m2
125 cd/m2
(x)
*1
0.310
*1
(y)
*1
0.320
*1
100
––
––
Brightness
Chromaticity
Contrast
* Chromaticity range is the area of the ellipse. (See Chromaticity Diagram
next page) The ellipse passes through points A, B, C and D and
designates the center of each side of the quadrangle.
www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected]
4
OLED SMARTSWITCH Rocker
TM
Chromaticity Diagram
Chromaticity X
Chromaticity Y
A
0.3441
0.3663
B
0.2983
0.3384
C
0.2799
0.2881
D
0.3257
0.3160
Chromaticity Y
Point
TIMING SPECIFICATIONS
AC Characteristics
(Temperature at –20°C ~ +70°C), VDDA = 2.8V, VAH = 16V
Items
Symbols Minimum Typical Maximum
Clock Cycle Time
t c yc le
100ns
––
––
A0 Setup Time
t SWDS
65ns
––
––
A0 Hold Time
t SWDN
35ns
––
––
XCS Setup Time
t CWS
65ns
––
––
XCS Hold Time
t CWH
95ns
––
t CSBH
*10ns
––
––
Write Data Setup Time
t WDTS
10ns
––
––
Write Data Hold Time
t WDTH
20ns
––
––
SCL Low Time
t SCLL
45ns
––
––
SCL High Time
t SCLH
45ns
––
––
SCL Rise Time
tr
––
––
15ns
SCL Fall Time
tf
––
––
15ns
A
B
D
C
0.27
0.29 0.31 0.33
Chromaticity X
0.35
0.37
A0
––
High Level XCS Pulse Width
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.25
tSWDS
t SWCH
t C WS
t CWH
XCS
tCSBH
tR
t S C LH
t c y c le
SCL
tF
t S C LL
tW D S
SI
tW D T H
D7
D6
D5
D4
D3
D2
D1
D0
* Requires more than 100ns after resetting software
Black & White OLED Panel
96 x 64
SEG1 . . . SEG96 COM1 . . . COM64
BLOCK DIAGRAM & PIN CONFIGURATIONS
Segment Driver
VDDA 1
VAH 8
XRES 2
SCL
XCS
SI
A0
5
3
6
4
Common Driver
OLED Driver
with Controller
Light Decoder
Display Control
& Screen Saver
Graphic Display
Data
RAM
128 x 64 x 1 Bit
I/F Circuit Block
Oscillator
Timing
Control
Register
VSS 7
IS18WWC1W
Pin No.
Symbol
1
2
3
4
VDDA
XRES
XCS
5
6
SCL
SI
VSS
VAH
SW1
SW2
SW3
SW_COM
7
8
9
10
11
12
9 SW1
10 SW2
11 SW3
SW_COM 12
A0
Name
Logic Type Power Source
Reset
Chip Select
Function
Terminal to initialize IC built-in logic; initializes with low level
Slave select for SPI. This line is active low.
Address
Terminal to input control signals of command/parameter
Set low at time of command input and high level at the time
of parameter input.
Serial Clock
Serial Data Input
Ground
Drive Type Power Source
Switch Terminal 1
Switch Terminal 2
Switch Terminal 3
Switch Common Terminal
Read command/parameter at time of SCL signal standing up
Terminal to input command/parameter by SPI
N/O
N/O
N/O
www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected]
5
OLED SMARTSWITCH Rocker
TM
SMARTSWITCH TYPICAL DIMENSIONS
(21.8)
.858
See
Pixel Detail
(35.4)
1.394
(19.16)
.754
(38.8)
1.528
(13.22)
.520
(15.3)
.602
(50.7)
1.996
NKK P/N
This Side
(30.6)
1.205
(46.7)
1.839
(35.1)
1.382
(2.0)
.079
(37.9)
1.492
(0.8)
.031
(5.6)
.220
(14.6)
.575
(34.9)
1.374
12
11
10
(0.04) Typ
.0016
(0.16) Typ
.0063
Panel Thickness Range
(0.177) Typ
.0070
(0.03) Typ
.0012
3
2
1
Pixel Detail
(48.6)
1.913
.039 ~ .157"
(1.0mm ~ 4.0mm)
Terminal Connector Detail
(35.4)
1.394
STATE TRANSITION
Power ON/OFF Sequence
State 0
Power OFF
(VAH, VDDA OFF)
State 0
2 : Power OFF
8 : Initialization
7 : Power OFF
Initialization Setting
State 1 ( State 3)
State 2
Power ON
1 : Power ON, Initialization
Power OFF
2.5V
6 : VAH ON
State 3
Power Saver
Mode
State 1
Display OFF
(Sleep Mode)
5 : VAH OFF
3 : Display ON
State 2
Display ON
VDDA
4 : Display OFF
XRES
9 : Changing the Display
State
Number
State
9 : Changing the Display
Display Sleep
VAH
9 : Changing the Display
VDDA
Changing
the Display
2.5V
Waiting time for oscillation
stability (about 1.1ms)
0V
Reset low pulse width
Trw (minimum 3µs)
“L”
(VDDA x 0.75)V
Completion time of reset Tr (minimum 0.1µs)
Waiting time to stabilize
VAH Level
VAH voltage: 1s (reference)
Minimum 0µs
Maximum 100ms
Maximum 100ms
“L”
“L”
0
Power OFF
OFF
––
OFF
OFF
Disable
1
Display OFF
OFF
ON
ON
ON
Enable
A0
2
Display ON
ON
OFF
ON
ON
Enable
SCL/SI
3
Power Saver
OFF
ON
OFF
ON
Enable
Reset low pulse width
Trw (minimum 1µs)
(VDDA x 0.25)V
Minimum 0µs
Waiting time to stabilize VAH
voltage: 1ms (reference)
VAH
0V
XCS
State 0
“Hi-z”
“H” or “L”
“H” or “L”
“H” or “L”
www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected]
6
OLED SMARTSWITCH Rocker
TM
STATE TRANSITION (CONTINUED)
State
Transition
Transition
Reference or Setting Procedure
1
Power ON
Refer to "Power ON/OFF Sequence"
Refer to "Initialization Setting"
Display ON/OFF Sequence
2
Power OFF
Refer to "Power ON/OFF Sequence"
State 2 Display State 1 VAH OFF State 3 VAH ON State 1 Display State 2
OFF
ON
3
Display ON
4
Display OFF
5
VAH OFF
6
VAH ON
7
Power OFF
Refer to "Power ON/OFF Sequence"
8
Initialization
Refer to "Initialization Setting"
9
Display
Change
Refer to
"Display ON/OFF Sequence"
VDDA
Display
Wait until VAH becomes stable
Standby
2.85V
ON
OFF
Minimum 10ms
ON
OFF
Minimum 0µs
Waiting time to stabilize VAH
voltage: 1ms (Reference)
Minimum 0µs
Image
Rewriting
96 x 64 Image Data Sending
Display
Settings
Dimmer/Screen Saver/Indication
180° Reversal
VAH
Minimum 0µs
15V
0V
INITIALIZITION SETTING
Command Name
Command Parameter
Remarks
Address (1 or 2Byte)
Software Reset
01
Dot Matrix Display ON/OFF
02
00
Read/Write Operation Wetting
07
Display Direction Set Command
Command Name
Command Parameter
Remarks
Address (1 or 2Byte)
X Axis Reading Start Address
38
00
Note 1
Note 1
Y Axis Reading Start Address
39
00
Note 1
00
Note 1
Reserved 9
48
03
Note 2
09
00
Note 1
Reserved 1
10
03
Note 2
Screen Saver Event Timer Setting
Command
C3
00
Note 1
Reserved 2
12
63
Note 2
C4
00
Note 1
Reserved 3
13
00
Note 2
Screen Saver Event Timer Setting
Command
Dot Matrix Display Standby ON/OFF
14
00
One Time, Repeat or Direction
Setting for Screen Saver
CC
00
Note 1
Reserved 4
16
00
Note 2
Start/Stop Setting for Screen Saver
CD
00
Note 1
Reserved 5
17
00
Notes 1 & 2
System Clock Division Ratio Setting
D0
80
Note 2
Reserved 6
18
09
Note 2
Reserved 7
1A
04
Notes 1 & 2
Setting the STBY Pin
D2
00
Notes 1 & 2
Reserved 8
1C
00
Notes 1 & 2
DACA Setting
D4
00
Notes 1 & 2
Graphic Memory Writing Direction
1D
00
Note 1
DACB Setting
D5
00
Notes 1 & 2
Setting Column Output Range
30
005F
Note 1
DACC Setting
D6
00
Notes 1 & 2
Setting Row Output Range
32
003F
Note 1
DACD Setting
D7
00
Notes 1 & 2
X Axis Reading/Writing Start Point
34
00
Note 1
Reserved 10
D9
00
Notes 1 & 2
X Axis Reading/Writing End Point
35
0F
Note 1
Dimmer Setting
DB
0F
Note 1
Y Axis Reading/WritingStart Point
36
00
Note 1
Reserved 11
DD
88
Note 2
Y Axis Reading/Writing End Point
37
3F
Note 1
Image Writing
08
Image data
Notes: 1. Same as default value
2. Do not change setting value
Notes: 1. Same as default value
2. Do not change setting value
www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected]
7
OLED SMARTSWITCH Rocker
TM
DEVELOPMENT TOOLS
NKK Switches offers a variety of development tools. These tools include software that may be downloaded
from www.nkksmartswitch.com.
In addition to standard configurations, NKK can provide custom solutions for the most complex design
challenges. Contact factory for information and support regarding your custom applications.
Development Kits provide a full set of tools for designs. The Dev Kits enable rapid prototype designs so
that feedback is easily obtained. NKK’s Development Kits have been designed to facilitate the creation,
testing and displaying of images with software downloaded from www.nkksmartswitch.com. Click on
“Download Software.”
PRECAUTIONS FOR HANDLING & STORAGE
ATTENTION
Handling
ELECTROSTATIC
SENSITIVE DEVICES
1. OLED devices are electrostatic sensitive.
2. Signal input under conditions not recommended may cause damage to the OLED unit or deterioration of the display.
Follow directions regarding supply sequences of power and signal voltages.
3. If the OLED panel is broken, avoid touching the contents. Wash off in case of contact to the skin or clothing.
4. Limit operating force to 100.0N maximum, as excessive pressure may damage the display.
5. Under certain actuation conditions, one side of the rocker and the center switch can both send actuation signals.
6. Pixels acquire diminished brightness over time and use, and those most frequently habituated have greater reduction of brightness than those less used. To minimize this difference, operate OLED unit so that all pixels are used as consistently
as possible.
7. Clean actuator surface with dry cloth. If further cleaning is needed, wipe with dampened cloth using neutral cleanser and dry with clean cloth. Do not use organic solvent.
Storage
1. Store in original container and away from direct sunlight.
2. Keep away from static electricity.
3. Avoid extreme temperatures, high humidity, gaseous substances, and all forms of chemical contamination.
Panel Mounting
Incorrect
Correct
Gasket position must be even with no gaps beneath bezel
Gasket secure and flush against bezel
• Before snapping a switch into the panel, align the
gasket evenly under the bezel of the switch.
• When mounting into a panel, apply equal pressure
to sides of bezel and insert parallel to the panel.
• After mounting, be sure there are no gaps between switch and panel. Lightly push into panel.
• After installing into panel, do not apply excessive force.
• After panel installation and wiring is completed, do not apply force horizontally or
vertically from behind panel.
• Behind the panel, cut area should be squared. If front of panel is painted, do not allow any paint
to collect in corners of cutout to prevent level mounting.
• Avoid reinstalling a switch once it has been mounted into panel. This may cause deterioration of
panel sealability.
Clean Edges
www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected]
8