Toggles Series AB Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) C Logic Level: Other Ratings Touch Indicators Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Travel: Materials & Finishes Plunger: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Installation Cap Installation Force: PCB Processing Soldering: Cleaning: Standards & Certifications 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. 50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 50,000 operations minimum 50,000 operations minimum 2.55N Nonshorting (break-before-make) Pretravel .028” (0.7mm); Overtravel .016” (0.4mm); Total Travel .043” (1.1mm) Polyacetal Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Brass with gold plating Brass with gold plating –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) 49.03N (11.2 lbf) maximum downward force on actuator Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile B in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. The AB Series pushbuttons have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. Supplement Accessories Process Sealed Subminiature Pushbuttons C6 www.nkk.com Toggles Series AB Rockers Distinctive Characteristics Subminiature size (1/3 size of Series M switches) saves space on PC boards. C Programmable Illuminated PB Specifically developed for logic-level applications. Pushbuttons Process Sealed Subminiature Pushbuttons Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Rotaries Keylocks Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Tactiles Slides Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants. Tilt .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Touch Matching indicators available. Supplement Accessories Indicators Actual Size www.nkk.com C7 Series AB Toggles Process Sealed Subminiature Pushbuttons TYPICAL SWITCH ORDERING EXAMPLE C 2 5 A P H A Poles 1 Programmable Illuminated PB Pushbuttons Rockers AB 2 SPST SPDT PC Terminals DPDT Keylocks Circuits 1 OFF (ON) 5 ON (ON) P Straight B Straight with Bracket B1 Straight with Inline Bracket (SP only) H Right Angle with Bracket V Vertical with Bracket V1 Vertical with Inline Bracket (SP only) Rotaries ( ) = Momentary Slides Plungers Caps A .213” (5.4mm) Long F .201” (5.1mm) Diameter A Black *B .183” (4.65mm) Long H .295” (7.5mm) Diameter B White *C .080” (2.03mm) Long (cannot be used with cap) C Red Tilt Tactiles * Available in single pole only DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Touch AB25AP-HA Indicators .213” (5.4mm) Long White Plunger Black .295” (7.5mm) Diameter Cap DPDT Supplement Accessories Straight PC Terminals C8 Cap Colors www.nkk.com ON-(ON) Circuit Series AB Toggles Process Sealed Subminiature Pushbuttons POLES & CIRCUITS Normal Down Normal Down Note: Terminal numbers are not actually on the switch. Pole Model SP AB11 OFF (ON) OPEN 3-1 SPST SP AB15 ON (ON) 2-3 2-1 SPDT DP AB25 ON (ON) 2-3 5-6 2-1 5-4 DPDT 1 3 C INTERNAL CONNECTION 2 (COM) 3 1 2 (COM) 3 1 5 4 6 PLUNGERS B (2.8) Dia .110 .183” (4.6mm) Long (on SP only) .080” (2.03mm) Long (on SP only) C (2.8) Dia .110 (2.8) Dia .110 (4.6) .183 (5.4) .213 Standard Plunger Color: White Keylocks .213” (5.4mm) Long (2.03) .080 Rotaries A Rockers Throw & Schematics Pushbuttons Connected Terminals Programmable Illuminated PB Plunger Position ( ) = Momentary Contact factory for red or black options. Straight with Bracket Right Angle with Bracket H V Vertical with Bracket (10.16) .400 (2.54) Typ .100 (5.08) Typ .200 (0.6) Dia Typ .024 (5.08) .200 (5.08) .200 (0.3) Typ .012 (2.54) Typ .100 (0.6) Dia Typ .024 (0.7) Typ .028 (0.8) .031 (9.0) .354 (9.0) .354 (8.8) .346 (5.08) .200 (2.54) Typ .100 (0.6) Dia Typ .024 (2.54) Typ .100 (2.54) Typ .100 (5.08) .200 (0.3) .012 (5.08) .200 (0.3) .012 (0.7) .028 (0.5) .020 (8.8) .346 (8.8) .346 (9.0) .354 (0.6) Dia Typ .024 (0.5) Typ .020 Tactiles B Straight (0.7) .028 Tilt P Slides PC TERMINALS (9.0) .354 (8.8) .346 Touch Use of a support bracket is recommended to increase PCB mounting strength and stability. B1 & V1 terminal dimensions appear on the pushbutton drawings which follow. Material: Polyamide For use with plungers A & B only. AT496 .295” (7.5mm) Diameter Cap H (5.1) Dia .201 (6.3) (5.4) .248 .213 Colors Available: (2.8) Dia .110 Material: Polyamide (4.0) .157 A (7.5) Dia .295 (6.3) (5.4) .248 .213 For use with plungers A & B only. Black B www.nkk.com White C (2.8) Dia .110 (4.0) .157 Accessories AT475 .201” (5.1mm) Diameter Cap Supplement F Indicators SLIP-ON CAPS Red C9 Series AB Toggles Process Sealed Subminiature Pushbuttons TYPICAL SWITCH DIMENSIONS Single Pole (5.0) .197 (4.5) .177 (4.0) (5.1) Dia .157 .201 (0.4) Typ .016 (0.6) Dia Typ .024 C COM (9.8) .386 2 3 Slot (2.8) Dia .110 (0.3) .012 (5.4) .213 (6.3) .248 (5.84) .230 (0.5) .020 (13.1) .516 (2.54) Typ .100 (3.1) .122 2 3 (1.0) .039 (5.08) .200 CL AB15AP-FA (1.0) .039 1 1 (6.0) .236 CL (2.54) Typ .100 (0.8) Dia Typ .031 AB11 model does not have terminal 2. Straight PC Double Pole (5.0) .197 (0.4) Typ .016 (4.0) .157 (5.1) Dia .201 (3.5) .138 (0.6) Dia Typ .024 (6.0) .236 COM Slot Keylocks Programmable Illuminated PB Pushbuttons Rockers Straight PC (2.8) Dia .110 (0.4) .016 (5.4) .213 (6.3) .248 (9.2) .362 (0.8) .031 (13.1) .516 1 4 2 5 3 6 (9.8) .386 4 1 5 2 6 3 (5.08) .200 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) Typ .100 (3.1) .122 (5.08) .200 Straight PC • Bracket Single Pole (5.0) .197 (5.1) Dia .201 (4.0) .157 (4.5) .177 Slot Tactiles (5.84) .230 (2.8) Dia .110 (0.3) .012 (5.4) .213 (6.3) .248 (0.5) .020 (13.1) .516 1 1 COM (9.8) .386 2 3 3 (1.0) .039 (2.54) CL .100 (0.3) Typ .012 (3.1) .122 CL 2 3 (0.8) Dia Typ .031 (2.54) .100 CL B Terminals Tilt (2.54) Typ .100 (0.8) Dia Typ .031 B1 Terminals Double Pole (5.0) .197 (5.1) Dia .201 (4.0) .157 (3.5) .138 (6.0) .236 Touch (1.0) .039 1 (2.54) Typ .100 2 AB15AB-FA Straight PC • Bracket (0.4) .016 Slot (2.8) Dia .110 (9.5) .374 (5.4) .213 (6.3) .248 (0.8) .031 (13.1) .516 (0.6) Dia Typ .024 (2.54) Typ .100 (10.16) .400 (5.08) .200 COM 1 4 2 5 3 6 (9.8) .386 4 1 5 2 6 3 (0.7) Typ .028 (5.08) .200 (0.3) Typ .012 (3.1) .122 (2.54) Typ .100 (0.8) Dia Typ .031 AB25AB-FA Right Angle PC Single Pole (Single Throw) (6.0) .236 Accessories Indicators (1.0) .039 (0.7) .028 (0.6) Dia Typ .024 (2.54) Typ .100 (10.16) .400 (6.0) .236 Slides Rotaries AB25AP-FA (0.3) .012 (5.1) Dia .201 (4.0) .157 Slot (3.3) .131 (5.0) .197 Supplement (0.3) Typ .012 (5.08) .200 AB11AH-FA C10 (0.8) .031 3 (2.8) Dia .110 (9.8) .386 (5.4) (0.7) .213 .028 (6.3) .248 (10.8) (9.38) .425 .369 www.nkk.com (3.1) .122 (5.08) .200 1 (6.18) .243 (0.6) Dia Typ .024 (5.08) .200 (5.08) .200 1 3 (5.08) .200 (0.8) Dia Typ .031 Series AB Toggles Process Sealed Subminiature Pushbuttons TYPICAL SWITCH DIMENSIONS (4.0) .157 Slot (0.8) .031 (3.3) .131 (5.0) .197 (0.3) Typ .012 (5.08) .200 3 (2.8) Dia .110 (5.4) (0.7) .213 .028 (6.3) .248 (10.8) (9.38) .425 .369 (9.8) .386 Rockers (5.1) Dia .201 (6.18) .243 2 1 (3.1) .122 (5.08) .200 1 2 3 (2.54) Typ .100 (5.08) .200 C (0.8) Dia Typ .031 (0.6) Dia Typ .024 (2.54) Typ .100 AB15AH-FA (5.1) Dia .201 (4.0) .157 (0.8) .031 Slot (5.0) .197 (0.3) Typ .012 (5.08) .200 (2.8) Dia .110 (5.2) .205 (5.4) .213 (6.3) .248 (9.8) .386 (9.8) .386 (0.7) .028 (5.08) .200 (2.54) .100 (12.92) .509 3 2 1 6 5 4 (10.0) .394 1 2 4 5 6 (5.08) .200 (0.8) Dia Typ .031 (3.1) .122 (0.5) .020 (0.6) Typ .024 (2.54) Typ .100 Keylocks (0.4) .016 Right Angle PC (2.54) Typ .100 (2.54) 3 .100 COM (6.0) .236 Double Pole Pushbuttons (0.3) .012 Right Angle PC Programmable Illuminated PB (6.0) .236 Single Pole (Double Throw) COM 1 (0.3) Typ .012 (1.0) .039 (5.4) .213 (6.3) .248 (10.8) .425 (5.84) .230 3 (1.0) .039 (5.08) (3.9) .200 .153 (5.08) .200 (0.7) .028 (14.46) .569 AB11 model does not have terminal 2. (5.0) .197 (0.4) .016 Single Pole (5.1) Dia .201 1 (5.3) .208 Slot (0.7) Typ .028 (2.8) Dia .110 (5.4) .213 (6.3) .248 (10.8) .425 (5.84) .230 (2.54) .100 (2.54) .100 (14.46) .569 1 2 3 (0.6) Dia Typ .024 (1.0) .039 (5.08) .200 CL (0.8) Dia Typ .031 (2.54) .100 CL (0.4) .016 Double Pole (5.1) Dia .201 (2.8) Dia .110 (9.5) .374 (1.0) .039 (2.54) Typ .100 AB11 model does not have terminal 2. (4.0) .157 (5.4) .213 (6.3) .248 (9.8) .386 (5.3) .208 (0.7) .028 (5.08) .200 (15.46) .609 (1.0) (0.5) (3.1) .039 .020 .122 (2.54) Typ .100 COM AB15AV-FA Vertical PC (0.8) .031 (6.0) .236 Slot (10.2) .402 2 3 (0.5) .020 (3.1) (1.0) .122 .039 (2.54) Typ .100 (5.0) .197 COM AB11AV1-FA Vertical PC (0.8) .031 (4.0) .157 (6.0) .236 (0.3) Typ .012 (5.08) .200 (0.8) Dia Typ CL .031 CL (5.08) .200 (0.6) Dia Typ .024 (1.0) .039 (5.08) .200 (0.3) Typ .012 (2.54) .100 2 Tilt (2.8) Dia .110 Slot 3 (1.0) .039 (2.54) Typ .100 1 Slides (4.5) .177 (9.7) .383 Touch (6.0) .236 1 4 2 5 3 6 (10.2) .402 4 1 5 2 6 3 (5.08) .200 (2.54) Typ .100 (5.08) .200 (0.6) Dia Typ .024 (5.08) .200 (0.8) Dia Typ .031 AB25AV-FA www.nkk.com Indicators (5.1) Dia .201 Vertical PC • Inline Bracket Accessories (0.4) .016 Single Pole (4.0) .157 Supplement (5.0) .197 Tactiles Rotaries AB25AH-FA C11