DS52-0014 Low Cost Two-Way GMIC SMT Power Divider 1700 – 2000 MHz Features • • • • • Rev. V4 Functional Diagram Small Size and Low Profile Typical Insertion Loss: 0.6 dB Typical Amplitude Balance: 0.2 dB 1 Watt Power Handling SOT-26 Package Description M/A-COM’s DS52-0014 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-26 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include handsets, base station switching networks and other communication applications where size and PCB real estate are at a premium. Available in Tape and Reel. The DS52-0014 is fabricated using a passive integrated circuit process. The process features full-chip passivation for increased performance and reliability. Ordering Information Part Number Package DS52-0014 Bulk Packaging DS52-0014-TR 1000 piece reel Note: Reference Application Note M513 for reel size information. Pin Configuration Pin No. Function Pin No. Function 1 RF1 (OUT) 4 GND 2 GND 5 GND 3 RF2 (OUT) 6 RF IN 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0014 Low Cost Two-Way GMIC SMT Power Divider 1700 – 2000 MHz Rev. V4 Electrical Specifications: TA = 25°C1 Parameter Test Conditions Units Min Typ Max Insertion Loss Above 3.0 dB 1700 - 2000 MHz dB — 0.6 0.8 Isolation 1700 - 2000 MHz dB 16 20 — 1700 - 2000 MHz 1700 - 2000 MHz Ratio Ratio — — 1.2:1 1.1:1 1.4:1 1.3:1 Amplitude Balance 1700 - 2000 MHz dB — 0.2 0.4 Phase Balance 1700 - 2000 MHz Deg. — 1.5 3.0 VSWR Input RF1, RF2 Outputs 1. All specifications apply with a 50-ohm source and load impedance. Absolute Maximum Ratings 2. 3. 4. 2,3 Parameter Absolute Maximum Input Power4 1W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. With internal load dissipation of 0.125 W maximum. Recommended PCB Configuration .020 Typ. Plated Thru Hole 5 4 1 2 3 .056 Handling Procedures Please observe the following precautions to avoid damage: 6 .022 Typ. .006 Typ. .046 Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices." 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0014 Low Cost Two-Way GMIC SMT Power Divider 1700 – 2000 MHz Rev. V4 Typical Performance Curves @ 25ºC Insertion Loss vs. Frequency VSWR vs. Frequency Amplitude Balance vs. Frequency Isolation vs. Frequency Phase Balance vs. Frequency 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0014 Low Cost Two-Way GMIC SMT Power Divider 1700 – 2000 MHz Rev. V4 SOT-26† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.