s7141-10 kpic1039e

PHOTO IC
Photo IC for optical link
S7141-10
Photo IC for 50 Mbps optical link
Features
Applications
l DC to 50 Mbps data transmission
l Miniature size due to monolithic IC structure
l Inversion logic
l Digital output
l Designed to be used with L8045
l Data transmission in FA or OA applications subject to large
amounts of electro magnetic noise
l High-speed, short distance data transmission
l Burst data transmission
■ Absolute maximum ratings (Ta=25 °C)
Parameter
Symbol
Value
Power supply
Vcc
-0.5 to +7
Output current
Ioh
10
Power dissipation *1
P
250
Operating temperature
Topr
-10 to +70
Storage temperature
Tstg
-40 to +85
Soldering
230 °C, 5 s, at least 1.5 mm away from package surface
*1: Derate power dissipation at a rate of 1.75 mW /°C above Ta=25 °C
Unit
V
mA
mW
°C
°C
-
■ Electrical and optical characteristics (Ta=25 °C)
Parameter
Data rate
Supply voltage
Current consumption
Pulse width distortion
Minimum overload
Minimum receiver input power
Rise time
Fall time
Symbol
Condition
Min.
Typ.
Max.
fD
DC
50
Vcc
4.75
5.25
Icc
Without light input
32
-6
+6
∆T
Pimax
*2, *3
-5
Pimin
*2, *3
-17.5
tr
*3
7
tf
*3
7
Voh
Ioh=20 µA
2
Output voltage
1
Vol
Iol= -0.6 mA *4
*2: Output from a 1 meter long plastic fiber (GH4001 made by Mitsubishi Rayon) set close to the molded lens.
*3: Evaluated based on the input/output waveforms shown below. Measured with a low-capacitance FET probe (3 pF
*4: Output is the “L” level (inversion logic) when light is input.
■ Input optical waveform definition
pw1
80 %
1.5 V
20 %
1.2 V
tf=5 ns
or less).
■ Output optical waveform definition ■ S7141-10 output waveform example
(Input light is referenced by drive circuit
on front page)
1.8 V
(Ta=25 °C, Pi= -16 dBm, Vcc=5.0 V)
50 %
tr=2 ns
Unit
Mbps
V
mA
ns
dBm
dBm
ns
ns
V
V
tr
tf
pw
∆T = pw1 - pw
KPICC0022EA
KPICC0023EB
5 ns/div.
KPICC0068EA
1
Photo IC for optical link
S7141-10
■ Dimensional outline (unit: mm)
1.77
5.2 ± 0.3
(INCLUDING BURR)
5.0
0.97
0.4
10˚
4.3
1.8
10˚
(0.9)
4.5 ± 0.3
(INCLUDING BURR)
4.3
6.6 ± 0.4
0.5
A
(1.5)
(2.15)
1.4
0.69
0.25
1.27 1.27 1.27
(0.9)
0.66
1.8
(0.9)
10˚
1.24
0.2
(SPECIFIED AT THE LEAD ROOT)
0.25
Surface B
Detail of part A
10˚
5.0
GND
OUT
GND
Vcc
Lens tip does not project over surface B.
Tolerance unless otherwise
noted: ±0.1, ±2˚
Shaded area indicates burr.
Values in parentheses indicate
reference value.
KPICA0043EE
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
2
Cat. No. KPIC1039E06
Jun. 2006 DN