AA3200 Thermal Sliding Doors

AA®3200 ISOWEB® Sliding Door
Stands up to the elements.
Stands out in the industry.
Slab-to-slab units can span
up to 10' tall, providing vast
open views.
HIGH PERFORMANCE – AA®3200HP
HURRICANE RESISTANT – AA®3200IR
Mother Nature can be unpredictable, and the effects of weather are
constant considerations when designing and constructing buildings.
Whether it’s rain, wind, blizzards or hurricane conditions, Kawneer
has designed the AA®3200 ISOWEB® Sliding Door to meet the
challenges of thermal, coastal and hurricane resistant conditions.
With contemporary hardware, clean sightlines, sound resistance
and endless configuration options, AA®3200 ISOWEB® Sliding Door
is the perfect choice for your next high-end project. Balancing form
with function, this sliding door stands up to the elements while
standing out in the industry.
Performance
High-velocity winds, torrential rains, blizzards and hurricanes are just a
few of the challenging weather elements that architects and building
owners face. Kawneer’s AA®3200 ISOWEB® Sliding Door, designed to
meet thermal, coastal and hurricane resistant conditions, helps meet
these challenges. Available in both High Performance (HP) and
Hurricane Resistant (IR) versions, AA®3200 ISOWEB® Sliding Door
complements Kawneer’s portfolio of thermal solutions and products for
the entire building.
Kawneer’s high-performance ISOWEB® thermal break allows this
slider to meet current energy codes and provides capabilities for a
dual finished product. In addition to thermal performance, AA®3200
ISOWEB® Sliding Door has been tested for both large and small
missile impact on panels up to 10' tall. For enhanced STC and OITC
(sound resistance) performance, the slider accommodates 1-5/16"
(33.3) insulated/ laminated glass, and it accommodates 1" (25.4)
insulated glass for improved thermal performance.
insulated/ laminated glass. Coped, screw spline corner joinery keeps
fabrication and assembly simple. The sliding panel and sub-sash fixed
panel can be pre-glazed; the common glass size makes glazing and
installation quicker. With many fabrication and installation advantages
as well as high-performance features, the AA®3200 ISOWEB® Sliding
A larger wheel, stainless steel tandem roller with precision ground
sealed bearings, provides smooth operation on even the largest
and heaviest sliding panels. Additionally, the sealed bearings offer
maximum protection against coastal elements such as wind-blown
sand and salt water. Other features include corrosion-resistant stainless
steel locks and fasteners. To keep insects at bay, interior insect screens
are available.
Aesthetics
AA®3200 ISOWEB® Sliding Door has been tested to meet North
American performance standards:
PERFORMANCE
STANDARD
RESULTS
AA®3200
(panel test size 5' x 8')
Load Resistance
NAFS*
AW-PG135-SD
CSA-A440-00
C5 Mullions
Hurricane Resistance
(panel test size 4' x 10')
ASTM E 1886/
E 1996,
FBC-TAS 201/203
Large and Small
Missile (+/- 135 psf)
Air Leakage – Infiltration
Air Leakage – Exfiltration
ASTM E 283
A440 – A2 Level
CSA-A440-00
0.03 cfm/ft2 @ 6.24 psf
0.13 cfm/ft2 @ 6.24 psf
A2
Water Penetration
ASTM E 331, E 547
CSA-A440-00
15 psf
B7
Sound Transmission
ASTM E 1425, E 90
ASTM E 1332
STC – 38
OITC – 33
Thermal Transmittance**
AAMA 1503
U-Value – .45 to .63
Condensation Resistance**
AAMA 1503
CRFf – 57 to 49
CRFg – 66 to 57
Temperature Index
CSA-A440-00
If – 39
Ig – 53
*AAMA/WDMA/CSA 101/I.S.2/A440-08
**AA®3200 ISOWEB® Sliding Door has also been tested for U-Value
simulations for other glazing options to AAMA 507 and NFRC 100,
200 and 500. Results will vary depending on frame and glass options.
Door can be tailored to meet a variety of project requirements.
AA®3200 ISOWEB® Sliding Door can span slab-to-slab up to 10' tall,
which offers occupants clear unobstructed views. Various mullion and
reinforcement options provide additional performance and design
flexibility. Two distinct looks can be achieved with the AA®3200
ISOWEB® Sliding Door: a sub-sash option offers equal sightlines
across the opening, while the direct field glazing option offers the
more traditional sliding door look. The 2-1/4" (57.2) standard sill (up
to 4-1/2" (114.3) sill on some competitor’s products), with 15 psf water
performance, provides an aesthetically pleasing smaller sightline at
the interior to exterior transition.
Standard configurations consist of OX, XO, OXO and OXXO openings,
while a common mullion allows for additional fixed panels to be stacked
(OOXO), achieving even greater expanses of glass. The unique beveled
profiles create architectural shadow lines, which allow a commercial
product to receive mid- to high-rise residential acceptance.
AA®3200 ISOWEB® Sliding Door’s stylish design and performance
offer a practical product solution for use on condominiums, hotels
and apartments.
For the Finishing Touch
Permanodic® Anodized finishes are available in Class I and Class II in
seven different color choices.
Painted finishes, including fluoropolymer, that meet AAMA 2605 are
offered in many standard choices and an unlimited number of specially
designed colors.
Solvent-free powder coatings add the green element with high
performance, durability and scratch resistance that meet the standards
of AAMA 2604.
Fabrication and Installation
Fixed lites, sliding panels and sub-sash panels of the AA®3200 ISOWEB®
Sliding Door all incorporate removable stops with interior and exterior
gaskets in lieu of marine glazing. Removable stops ensure re-glazing
is as easy as the initial glazing process and no panel disassembly is
required for glass replacement. Variable glass stops accommodate
industry standard 1" (25.4) insulated glass as well as 1-5/16" (33.3)
Notes: Numbers in parentheses ( ) are millimeters unless otherwise noted.
Patents Pending
Kawneer Company, Inc.
Technology Park / Atlanta
555 Guthridge Court
Norcross, GA 30092
© Kawneer Company, Inc. 2008
kawneer.com
kawneergreen.com
770 . 449 . 5555
LITHO IN U.S.A.
Printed using soy based inks.
Form No. 08-2081
Corrosion-resistant stainless
steel locks and fasteners provide
maximum security.
Safe operation with sturdy panel
stops and architectural shadow
lines created by the unique
beveled profiles.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
FEATURES
Features
• AATM3200HP (High Performance) meets:
AAMA/WDMA/CSA 101/I.S.2/A440-08 AW-PG135-SD
TM
• AA 3200IR (Hurricane Resistant) meets:
• ASTM E 1886/E 1996, FLORIDA BUILDING CODE (FBC) TAS 201/203
• Small and Large Missile impact & cycle tested to ±135 psf (±6464 Pa)
• Tested on panel sizes 5' x 8' (1524 x 2438) up to 4' x 10' (1219 x 3048)
• 6 Large Missile and 2 Small Missile interlayer options
• Water resistance up to 15 psf (718 Pa)
• Available as OX, XO, OXO and OXXO configurations, common mullion allows for additional
fixed lites to be stacked (OOXO)
• Accommodates 1" (25.4) and 1-5/16" (33.4) infills
• Polyamide thermal break allows for dual color finish capabilities
• Optional factory glazed sliding panels and sub sash fixed lites
• Optional low rise sill
• Corrosion-resistant stainless steel locks and fasteners
• PermanodicTM anodized finishes in seven choices
Product Applications
• The AATM3200HP and AATM3200IR are high performance, hurricane resistant thermal sliding
doors for use in condominiums, hotels and apartments.
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
• Painted finishes in standard and custom choices
For specific product applications,
Consult your Kawneer representative.
kawneer.com
ADMB080
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AATM3200 Thermal Sliding Doors
AUGUST, 2015
BLANK PAGE
EC 97911-079
ADMB080
kawneer.com
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
AATM3200 Thermal Sliding Doors
EC 97911-079
INDEX
3
TYPICAL ELEVATIONS....................................................................... 4
AATM3200HP (High Performance) TYPICAL DETAILS................... 5-7
GLAZING OPTIONS
AATM3200IR (Hurricane Resistant)............................................... 8
"Field Glazed" Fixed Lite.............................................................. 8
HARDWARE OPTIONS....................................................................... 9
WIND LOAD CHARTS.................................................................. 10-16
THERMAL CHARTS..................................................................... 17-24
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE,
WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE
SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS,
AND ASSUMES NO RESPONSIBILITY THEREFOR.
Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses
(
) are millimeters unless otherwise noted.
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AUGUST, 2015
The following metric (SI ) units are found in these details:
m –meter
cm – centimeter
mm –millimeter
s –second
Pa –pascal
MPa –megapascal
Kawneer reserves the right to change configurations without prior notice when deemed necessary for product
improvement.
kawneer.com
ADMB080
4
AATM3200 Thermal Sliding Doors
AUGUST, 2015
TYPICAL ELEVATIONS
EC 97911-079
TYPICAL ELEVATIONS
1
1
3
O
X
X
O
6
4
7
7
6
2
2
OX UNIT
5
4
XO UNIT
3
3
1
3
1
3
O
O
X
O
X
O
5
8
6
4
4
7
5
6
2
4
9
2
5
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
5
4
OXO UNIT
OOX UNIT
3
1
1
3
O
X
X
O
5
6
4
10
2
6
2
5
4
OXXO UNIT
ADMB080
kawneer.com
© Kawneer Company, Inc., 2012
3
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
ELEVATIONS ARE NUMBER KEYED TO DETAILS ON THE FOLLOWING PAGES
Note: Elevations shown with "Sub-Sash" framing in the fixed lite.
"Field Glazed" option creates a thinner sightline in the fixed lite, shown on page 8.
kawneer.com
2-3/8"
(60.3)
4-1/4"
(108)
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
3-1/2"
(88.9)
2-3/8"
(60.3)
4-1/4"
(108)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
AATM3200HP (High Performance) TYPICAL DETAILS
SCALE 3" = 1'-0"
AATM3200HP
HIGH PERFORMANCE GLAZING
DRY GLAZED - 1" INFILL
(NON-IMPACT) WITH "SUB SASH"
6-3/4"
(171.5)
1
HEAD
AT SLIDING PANEL
HEAD
AT FIXED LITE
OPTIONAL HORIZONTAL
AT SLIDING PANEL
OPTIONAL HORIZONTAL
AT FIXED LITE
3
SILL
AT SLIDING PANEL
2
SILL
AT FIXED LITE
4
ADMB080
5
6
AATM3200 Thermal Sliding Doors
AUGUST, 2015
AA 3200HP (High Performance) TYPICAL DETAILS
EC 97911-079
TM
SCALE 3" = 1'-0"
AATM3200HP
HIGH PERFORMANCE GLAZING
3-1/2"
(88.9)
2-1/4"
(57.2)
OPTIONAL STEEL
6-3/16"
(157.2)
5-1/2"
(139.7)
5
JAMB
AT SLIDING PANEL
INTERLOCKS
OPTIONAL
HEAVY MULLION
AVAILABLE
3-1/2"
(88.9)
OPTIONAL
HEAVY MULLION
AVAILABLE
3-1/2"
(88.9)
OPTIONAL STEEL
6-3/4"
(171.5)
OPTIONAL STEEL
4-7/8"
(123.9)
6-3/8"
(162)
7
6
JAMB
AT FIXED LITE
OPTIONAL
DEEP MULLION or
DEEP HEAVY MULLION
4-15/16"
(125.5)
3"
(76.2)
7-1/2"
(190.5)
8-3/16"
(208)
8
9
COMMON MULLION
LOCK STILE MULLION
ADMB080
kawneer.com
© Kawneer Company, Inc., 2012
6-3/4"
(171.5)
7-11/16"
(195.3)
OPTIONAL
HEAVY INTERLOCK
AVAILABLE
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
OPTIONAL
DEEP INTERLOCK or
DEEP HEAVY INTERLOCK
4-1/4"
(108)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DRY GLAZED - 1" INFILL
(NON-IMPACT) WITH "SUB SASH"
7"
(177.8)
kawneer.com
7"
(177.8)
MID-RANGE
MEETING STILES
10A
OPTIONAL
LOW RISE SILL
(SLIDING PANEL)
ADMB080
OPTIONAL
LOW RISE SILL
(FIXED PANEL)
5/8"
(15.9)
10
1-5/8"
(41.3)
1-13/16"
(46)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
STANDARD
MEETING STILES
5/8"
(15.9)
3/4"
(19.1)
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
AATM3200HP (High Performance) TYPICAL DETAILS
AATM3200HP
HIGH PERFORMANCE GLAZING
DRY GLAZED - 1" INFILL
(NON-IMPACT) WITH "SUB SASH"
OPTIONAL STEEL
7"
(177.8)
MAXIMUM RANGE
MEETING STILES
10B
8-3/8"
(213)
OPTIONAL
HEAD RECEPTOR
7
AATM3200 Thermal Sliding Doors
AUGUST, 2015
GLAZING OPTIONS
EC 97911-079
OPTIONAL "FIELD GLAZED" FIXED LITE
AATM3200HP
DRY GLAZED - 1" INFILL
AATM3200IR
DRY GLAZED - 1-5/16" INFILL
ADMB080
AATM3200IR
WET GLAZED - 1-5/16" INFILL
kawneer.com
© Kawneer Company, Inc., 2012
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DRY GLAZED - 1-5/16" INFILL
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2-1/4"
(57.2)
SCALE 3" = 1'-0"
2-1/4"
(57.2)
8
AATM3200IR
HURRICANE RESISTANT GLAZING
WET GLAZED - 1-5/16" INFILL
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
HARDWARE OPTIONS
Finger Pull - Blank
STANDARD INTERIOR PULLS
"D" Pull - Blank
Finger Pull with Cylinder
OPTIONAL EXTERIOR PULLS
"D" Pull - Blank
"D" Pull with Lever
LOCKING OPTIONS
1 Point Lock
"D" Pull with Cylinder
2 Point Lock
STANDARD CASTER
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
STANDARD EXTERIOR PULLS
Note:
Hookbolt lock standard with OXXO
units. Optional for other configurations.
MS Hookbolt Lock
Stainless Steel Caster
kawneer.com
ADMB080
9
10
AATM3200 Thermal Sliding Doors
AUGUST, 2015
WIND LOAD CHARTS
EC 97911-079
Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L\175 up to 13'-6" and L\240 + 1/4" above 13'-6".
These curves are for mullions WITH and WITHOUT HORIZONTALS and are based on engineering calculations for stress and deflection.
Allowable windload stress for ALUMINUM 15,152 P.S.I. (104 MPa). STEEL 30,000 P.S.I. (206 MPa). Charted curves, in all cases, are for the limiting
value. For special situations not covered by these curves, contact your Kawneer representative for additional information.
20
MULLION CENTERS IN METERS
A - 80 PSF
B - 100 PSF
C - 120 PSF
D - 135 PSF
E - 150 PSF
2.0
6.0
19
18
1.0
18
17
12
A
11
B
C
D
E
10
9
3.0
594010 STANDARD
INTERLOCK MULLION
IA = 3.689
SA = 1.822
2.0
6
5
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
4.0
A
12
B
C
D
E
11
10
3.0
9
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITHOUT HORIZONTALS
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
MULLION CENTERS IN METERS
MULLION CENTERS IN METERS
1.0
1.0
2.0
20
2.0
20
6.0
19
19
18
18
6.0
17
5.0
14
4.0
13
A
12
B
C
D
E
11
10
3.0
9
8
7
2.0
6
5
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
MULLION HEIGHT IN FEET
15
5.0
16
MULLION HEIGHT IN METERS
16
594011 HEAVY WEIGHT
INTERLOCK MULLION
IA = 5.164
SA = 2.375
594485 STEEL
IS = 0.573
SS = 0.611
WITHOUT HORIZONTALS
15
14
A
13
4.0
B
C
D
E
12
11
10
3.0
9
MULLION HEIGHT IN METERS
17
MULLION HEIGHT IN FEET
13
7
594485 STEEL
IS = 0.573
SS = 0.611
8
14
8
8
7
15
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4.0
13
MULLION HEIGHT IN FEET
14
MULLION HEIGHT IN METERS
MULLION HEIGHT IN FEET
15
5.0
16
MULLION HEIGHT IN METERS
5.0
16
4
6.0
19
17
4
2.0
20
8
7
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
ADMB080
kawneer.com
© Kawneer Company, Inc., 2012
1.0
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MULLION CENTERS IN METERS
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
WIND LOAD CHARTS
A - 80 PSF
B - 100 PSF
C - 120 PSF
D - 135 PSF
E - 150 PSF
2.0
6.0
1.0
19
19
18
18
A
14
B
13
C
D
E
12
4.0
11
10
3.0
9
MULLION HEIGHT IN FEET
MULLION HEIGHT IN FEET
15
MULLION HEIGHT IN METERS
5.0
16
594016 DEEP
INTERLOCK MULLION
IA = 9.275
SA = 3.347
2.0
6
5
4
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
16
C
15
D
E
5.0
14
4.0
13
12
11
10
3.0
9
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
MULLION CENTERS IN METERS
MULLION CENTERS IN METERS
1.0
2.0
6.0
19
18
18
17
17
A
5.0
14
13
4.0
12
11
10
3.0
9
8
7
2.0
6
5
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
MULLION HEIGHT IN FEET
C
D
E
6.0
A
B
C
D
E
16
MULLION HEIGHT IN METERS
B
15
2.0
20
19
16
MULLION HEIGHT IN FEET
B
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
20
594017 DEEP HEAVY WEIGHT
INTERLOCK MULLION
IA = 11.550
SA = 3.891
594481 STEEL
IS = 2.420
SS = 1.434
WITHOUT HORIZONTALS
kawneer.com
17
WITHOUT HORIZONTALS
1.0
4
A
7
594481 STEEL
IS = 2.420
SS = 1.434
8
6.0
8
8
7
2.0
20
17
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
20
MULLION CENTERS IN METERS
MULLION HEIGHT IN METERS
1.0
15
5.0
14
4.0
13
12
11
10
3.0
9
8
7
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
ADMB080
MULLION HEIGHT IN METERS
MULLION CENTERS IN METERS
11
AATM3200 Thermal Sliding Doors
AUGUST, 2015
WIND LOAD CHARTS
EC 97911-079
A - 80 PSF
B - 100 PSF
C - 120 PSF
D - 135 PSF
E - 150 PSF
1.0
2.0
20
6.0
MULLION CENTERS IN METERS
1.0
19
19
18
18
13
12
A
11
B
C
D
E
10
9
3.0
594012 STANDARD
COMMON MULLION
IA = 3.945
SA = 1.738
2.0
6
5
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
4.0
B
C
D
E
12
11
10
3.0
9
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITHOUT HORIZONTALS
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
MULLION CENTERS IN METERS
MULLION CENTERS IN METERS
1.0
1.0
2.0
20
2.0
20
6.0
19
19
18
18
6.0
17
5.0
14
4.0
13
A
12
B
11
C
D
E
10
3.0
9
8
7
2.0
6
5
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
MULLION HEIGHT IN FEET
15
5.0
16
MULLION HEIGHT IN METERS
16
594013 HEAVY WEIGHT
COMMON MULLION
IA = 4.964
SA = 2.105
594486 STEEL
IS = 0.976
SS = 0.486
WITHOUT HORIZONTALS
15
A
14
B
13
4.0
C
D
E
12
11
10
3.0
9
MULLION HEIGHT IN METERS
17
MULLION HEIGHT IN FEET
A
13
7
594486 STEEL
IS = 0.976
SS = 0.486
8
14
8
8
7
15
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4.0
MULLION HEIGHT IN FEET
14
MULLION HEIGHT IN METERS
MULLION HEIGHT IN FEET
15
5.0
16
MULLION HEIGHT IN METERS
5.0
16
4
6.0
17
17
4
2.0
20
8
7
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
ADMB080
kawneer.com
© Kawneer Company, Inc., 2012
MULLION CENTERS IN METERS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
12
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
WIND LOAD CHARTS
A - 80 PSF
B - 100 PSF
C - 120 PSF
D - 135 PSF
E - 150 PSF
2.0
6.0
19
18
18
17
17
5.0
14
B
C
D
E
13
12
4.0
11
10
3.0
9
MULLION HEIGHT IN FEET
A
15
594018 DEEP
COMMON MULLION
IA = 8.969
SA = 2.997
2.0
6
5
4
0
1
2
3
4
5
6
7
8
15
14
4.0
13
12
11
10
3.0
9
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
MULLION CENTERS IN METERS
MULLION CENTERS IN METERS
1.0
2.0
20
6.0
19
18
18
17
17
A
5.0
14
13
4.0
12
11
10
3.0
9
8
7
2.0
6
5
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
MULLION HEIGHT IN FEET
C
D
E
6.0
A
B
C
16
MULLION HEIGHT IN METERS
B
15
2.0
20
19
16
MULLION HEIGHT IN FEET
5.0
C
D
E
WITHOUT HORIZONTALS
1.0
594019 DEEP HEAVY WEIGHT
COMMON MULLION
IA = 11.537
SA = 3.625
594482 STEEL
IS = 2.138
SS = 0.821
WITHOUT HORIZONTALS
kawneer.com
B
7
594482 STEEL
IS = 2.138
SS = 0.821
MULLION CENTERS IN FEET
4
A
8
8
7
2.0
6.0
16
MULLION HEIGHT IN METERS
MULLION HEIGHT IN FEET
1.0
20
19
16
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
20
MULLION CENTERS IN METERS
MULLION HEIGHT IN METERS
1.0
5.0
D
E
15
14
4.0
13
12
11
10
3.0
9
8
7
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
ADMB080
MULLION HEIGHT IN METERS
MULLION CENTERS IN METERS
13
AATM3200 Thermal Sliding Doors
AUGUST, 2015
WIND LOAD CHARTS
EC 97911-079
A - 80 PSF
B - 100 PSF
C - 120 PSF
D - 135 PSF
E - 150 PSF
6.0
1.0
19
19
18
18
5.0
B
C
D
E
13
12
4.0
11
10
3.0
9
MULLION HEIGHT IN FEET
A
14
7
594014 STANDARD
LOCK MULLION
IA = 7.743
SA = 2.422
2.0
6
5
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
14
4.0
13
12
11
10
3.0
9
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITHOUT HORIZONTALS
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
MULLION CENTERS IN METERS
MULLION CENTERS IN METERS
1.0
1.0
2.0
20
6.0
19
18
18
17
17
5.0
C
D
E
14
13
4.0
12
11
10
3.0
9
8
7
2.0
6
5
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
MULLION HEIGHT IN FEET
B
15
6.0
A
B
C
16
MULLION HEIGHT IN METERS
A
2.0
20
19
16
MULLION HEIGHT IN FEET
C
D
E
15
7
594482 STEEL
IS = 2.138
SS = 0.821
8
5.0
B
8
8
4
A
16
MULLION HEIGHT IN METERS
MULLION HEIGHT IN FEET
15
4
6.0
17
17
16
2.0
20
594015 HEAVY WEIGHT
LOCK MULLION
IA = 11.469
SA = 3.310
594482 STEEL
IS = 2.138
SS = 0.821
WITHOUT HORIZONTALS
5.0
D
E
15
14
4.0
13
12
11
10
3.0
9
8
7
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
ADMB080
kawneer.com
© Kawneer Company, Inc., 2012
20
MULLION CENTERS IN METERS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2.0
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1.0
MULLION HEIGHT IN METERS
MULLION CENTERS IN METERS
MULLION HEIGHT IN METERS
14
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
WIND LOAD CHARTS
A - 80 PSF
B - 100 PSF
C - 120 PSF
D - 135 PSF
E - 150 PSF
MULLION CENTERS IN METERS
1.0
2.0
20
6.0
19
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
18
17
MULLION HEIGHT IN FEET
15
14
4.0
13
12
11
10
3.0
9
8
MULLION HEIGHT IN METERS
5.0
16
A
B
C 2.0
D
E
7
6
594128/594129 LIGHT WEIGHT
MEETING STILES
NOTE:
WINDLOAD CHARTS ARE BASED ON
COMPOSITE PROPERTIES WHICH ARE
CALCULATED IN ACCORDANCE WITH
AAMA TIR-8 AND AAMA 505
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITHOUT HORIZONTALS
1.0
2.0
20
6.0
19
18
17
MULLION HEIGHT IN FEET
15
14
4.0
13
12
11
10
3.0
A
B
C
D
E
9
8
7
MULLION HEIGHT IN METERS
5.0
16
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
MULLION CENTERS IN METERS
2.0
NOTE:
WINDLOAD CHARTS ARE BASED ON
COMPOSITE PROPERTIES WHICH ARE
CALCULATED IN ACCORDANCE WITH
AAMA TIR-8 AND AAMA 505
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITHOUT HORIZONTALS
kawneer.com
594124/594125 MID WEIGHT
MEETING STILES
ADMB080
15
AATM3200 Thermal Sliding Doors
AUGUST, 2015
WIND LOAD CHARTS
EC 97911-079
A - 80 PSF
B - 100 PSF
C - 120 PSF
D - 135 PSF
E - 150 PSF
2.0
20
6.0
MULLION CENTERS IN METERS
1.0
19
16
C
D
15
18
17
5.0
E
14
4.0
13
12
11
10
3.0
9
8
5.0
B
15
C
D
E
14
13
4.0
12
11
10
3.0
9
8
7
2.0
6
5
4
A
16
MULLION HEIGHT IN FEET
B
MULLION HEIGHT IN METERS
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
594126/594127 DEEP HEAVY WEIGHT
MEETING STILES
IA = 11.626
SA = 4.169
STEEL REINFORCING
IS = 1.707
SS = 0.939
WITH STEEL REINFORCING
WITHOUT HORIZONTALS
7
2.0
6
5
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
WITH STEEL REINFORCING
WITH HORIZONTALS
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
MULLION HEIGHT IN FEET
17
6.0
19
A
18
2.0
20
ADMB080
kawneer.com
© Kawneer Company, Inc., 2012
1.0
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MULLION CENTERS IN METERS
MULLION HEIGHT IN METERS
16
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
THERMAL CHARTS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Project Specific U-Factor
Example Calculation
(Based on OXO Sliding Door Unit)
10' 10-3/16"
5-1/2"
3'-0"
8-3/16"
3'-0"
4-1/4"
4-1/4"
3'-0"
4-1/4"
4-1/4"
O
4-1/4"
4-1/4"
7'-0"
X
7'-0"
O
= 0.42 Btu/(ft2·h·°F)
Example Glass U-Factor
Total Daylight (Vision) Area = 3(3' x 7') = 63 ft2
Projected Total Area
Percent of Vision Glass
= 7.71' x 10.85' = 83.65 ft2
= (Total Daylight Area ÷ Projected Total Area)100
= (63 ÷ 83.65)100 = 75%
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Vision Area
kawneer.com
ADMB080
17
AUGUST, 2015
THERMAL CHARTS
EC 97911-079
System U-Factor vs Percent of Vision Area
0.90
(5.00)
0.85
0.80
E IGN
PL S
M E
A D
EX OR
F
T
O
0.60
(3.50)
0.50
0.45
2
0.55
( mW·°C )
(2.73)
(2.61)
(2.50)
(2.39)
(2.27)
(2.16)
(2.05)
(1.93)
(1.82)
(1.71)
(1.59)
(1.48)
(1.37)
(1.25)
(1.14)
(4.00)
0.65
(3.00)
(2.50)
0.40
0.35
)
(2.00)
0.30
(1.50)
0.20
90
85
80%
75
70
65
Vision Area / Total Area (%)
Based on a OXO Unit of 75% vision glass and center of glass U-Factor
of 0.42, system U-Factor is equal to 0.55 Btu/(h·ft2·°F)
ADMB080
kawneer.com
© Kawneer Company, Inc., 2012
0.25
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.70
System U-factor
(N
COG
U-factor
(4.50)
0.75
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AATM3200 Thermal Sliding Doors
Btu
h·ft2·°F
18
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
COG
U-factor
kawneer.com
Btu
h·ft2·°F
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
THERMAL CHARTS
OX UNIT "FIELD GLAZED"
System U-Factor vs Percent of Vision Area
Vision Area / Total Area (%)
ADMB080
19
System Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
ADMB080
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System SHGC
AATM3200 Thermal Sliding Doors
AUGUST, 2015
THERMAL CHARTS
EC 97911-079
Vision Area / Total Area (%)
kawneer.com
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System VT
20
OX UNIT "FIELD GLAZED"
Vision Area / Total Area (%)
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
OX UNIT "FIELD GLAZED"
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.48
0.61
0.46
0.59
0.44
0.58
0.42
0.56
0.40
0.55
0.38
0.53
0.36
0.52
0.34
0.51
0.32
0.49
0.30
0.48
0.28
0.46
0.26
0.45
0.24
0.43
0.22
0.42
0.20
0.40
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
kawneer.com
21
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.60
0.75
0.59
0.70
0.56
0.70
0.55
0.65
0.56
0.65
0.51
0.60
0.48
0.60
0.47
0.55
0.44
0.55
0.43
0.50
0.40
0.50
0.39
0.45
0.37
0.45
0.35
0.40
0.33
0.40
0.31
0.35
0.29
0.35
0.27
0.30
0.25
0.30
0.24
0.25
0.21
0.25
0.20
0.20
0.17
0.20
0.16
0.15
0.13
0.15
0.12
0.10
0.09
0.10
0.08
0.05
0.05
0.05
0.04
ADMB080
System U-Factor vs Percent of Vision Area
ADMB080
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AATM3200 Thermal Sliding Doors
AUGUST, 2015
THERMAL CHARTS
EC 97911-079
Vision Area / Total Area (%)
kawneer.com
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
COG
U-factor
Btu
h·ft2·°F
22
OX UNIT "SUB SASH"
System VT
© Kawneer Company, Inc., 2012
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AUGUST, 2015
AATM3200 Thermal Sliding Doors
EC 97911-079
THERMAL CHARTS
Vision Area / Total Area (%)
kawneer.com
ADMB080
23
OX UNIT "SUB SASH"
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
Vision Area / Total Area (%)
System Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
AATM3200 Thermal Sliding Doors
AUGUST, 2015
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
EC 97911-079
Overall U-Factor 4
0.48
0.62
0.46
0.61
0.44
0.59
0.42
0.58
0.40
0.57
0.38
0.55
0.36
0.54
0.34
0.53
0.32
0.51
0.30
0.50
0.28
0.49
0.26
0.47
0.24
0.46
0.22
0.45
0.20
0.43
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.55
0.75
0.54
0.70
0.52
0.70
0.50
0.65
0.48
0.65
0.47
0.60
0.45
0.60
0.43
0.55
0.41
0.55
0.40
0.50
0.37
0.50
0.36
0.45
0.34
0.45
0.32
0.40
0.30
0.40
0.29
0.35
0.27
0.35
0.25
0.30
0.23
0.30
0.22
0.25
0.19
0.25
0.18
0.20
0.16
0.20
0.14
0.15
0.12
0.15
0.11
0.10
0.09
0.10
0.07
0.05
0.05
0.05
0.04
ADMB080
kawneer.com
© Kawneer Company, Inc., 2012
Glass U-Factor 3
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
OX UNIT "SUB SASH"
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
24
Similar pages