1 2 3 4 5 TECHNICAL CHARACTERISTICS A MATERIAL INSULATOR: LCP FLAMABILITY RATING: UL94-V0 COLOR: BLACK CONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED CONTACT PLATING: SELECTIVE GOLD SHIELDING: STAINLESS STEEL QUALITY CLASS: 10000 MATING CYCLES ENVIRONMENTAL OPERATING TEMPERATURE: -25 UP TO 85°C COMPLIANCE: LEAD FREE AND ROHS PCB LAYOUT - COMPONENT VIEW ELECTRICAL CURRENT RATING: 0.5A WORKING VOLTAGE: 100VAC INSULATOR RESISTANCE: >1000 MOHM DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MN CONTACT RESISTANCE: 100 mOHM MAX B SOLDERING REFLOW PROCESS ONLY PACKAGING TAPE & REEL PIN No Name 1 CD/DAT3 2 CMD 3 Vss1 4 Vdd 5 CLK 6 Vss2 7 DAT0 8 DAT1 9 DAT2 DESCRIPTION Connector data line 3 COMMAND/ANSWER GND POWER SUPPLY GLOCK GND Connector data line 0 Connector data line 1 Connector data line 2 C RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 L 13-NOV-15 PINNING AK K 03-AUG-15 PROHIBITED AREA AK J 30-JUN-15 DRAWING AK I 02-FEB-15 LAYOUT QL SCALE: DESCRIPTION: SD Card Connector - Push & Push - With Card Detection 9 pins H 06-JAN-15 DIMENSIONS QP SHEET: 1/4 WERI PART NO: 693 061 010 911 REV DATE FILE BY DRAW: AK APPROVAL: NPr UNIT: MM SIZE A4 D 1 2 3 4 5 A Contact ON / Lock OFF Contact OFF Contact ON / LOCK ON RETENTION CLIP GROUND RETENTION CLIP U DETAIL U S W DETAIL S T RETENTION CLIP DETAIL W A V CLOSE CIRCUIT Y DETAIL A DETAIL Y DETECTION CIRCUIT DETAIL T Card removed Card inserted OPEN CLOSE X DETAIL B B DETECTION CIRCUIT DETAIL V Card detection switch B DETAIL X Write protection switch Card inserted Card removed Write Protect Write enable OPEN OPEN CLOSE C RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 APPROVAL: NPr REV DATE FILE BY SCALE: DESCRIPTION: SD Card Connector - Push & Push - With Card Detection 9 pins SHEET: 2/4 WERI PART NO: 693 061 010 911 UNIT: MM DRAW: VICKY SIZE A4 D 1 2 3 4 5 A B C 400 pcs/reel 6 reels/carton 2400 pcs/carton RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 APPROVAL: NPr REV DATE FILE BY SCALE: DESCRIPTION: SD Card Connector - Push & Push - With Card Detection 9 pins SHEET: 3/4 WERI PART NO: 693 061 010 911 UNIT: MM DRAW: VICKY SIZE A4 D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 4/4 REV DATE FILE BY DRAW: QL D