1 2 3 4 5 15.48 6.99 13.80 2.70 TECHNICAL CHARACTERISTICS 2- 4.00 30 6.00 ±0.10 7.72 0.70 2.30 3.30 2- 1.00 11.78 1.50 3.60 1. 222.00 16.48 99- 11.78 1.50 2.00 2- 2.00 2- 3.50 13.14 15.10 11.00 MATERIAL INSULATOR: LCP FLAMMABILITY RATING: UL94-V0 COLOR: BLUE CONTACT MATERIAL: PHOSPHOR BRONZE CONTACT TYPE: STAMPED CONTACT PLATING: UNDERPLATE Nickel CONTACT AREA Pd-Ni + Gold SOLDER TAIL AREA Matt Tin SHIELDING: BRASS MATT TIN PLATED QUALITY CLASS: 5000 MATING CYCLES A ENVIRONMENTAL OPERATING TEMPERATURE: -20°C up to +85°C COMPLIANCE: LEAD FREE & RoHS CONNECTOR FRONT EDGE PCB LAYOUT * - COMPONENT VIEW TOLERANCE ± 0.05 MM ELECTRICAL CURRENT RATING: - PIN 1 & PIN 4 (Vbus & corresponding ground PIN) 1.8A MAX - OTHER PINS 0.25 A MAX WORKING VOLTAGE: 30 VAC DIELECTRIC WITHSTANDING VOLTAGE: 100 VAC/MIN INSULATION RESISTANCE: > 100 MΩ CONTACT RESISTANCE: - PIN 1 & PIN 4: 30 mΩ MAX - OTHER PINS: 50 mΩ MAX B 5.12 ±0.10 2- 4.00 ±0.05 2- 2.00 ±0.05 Pin Number 1 2 3 4 5 6 7 8 9 Shell 4.13 3.23 1.84 ±0.05 12.50 ±0.10 11.10 ±0.10 9- 0.50 4- 1.00 ±0.05 2- 1.00 ±0.05 2- 3.50 ±0.05 Signal Name VBUS DD+ GND StdA_SSRXStdA_SSRX+ GND_DRAIN StdA_SSTXStdA_SSTX+ Shield STANDARD CERTIFIED: E323964 MECHANICAL INSERTION FORCE: 35.0N MAX EXTRACTION FORCE: 10.0N MIN SOLDERING JEDEC LEAD FREE WAVE SOLDERING C PACKAGING TAPE & REEL 13.15 RoHS Compliant * NOTE: THE RECOMMENDED PCB LAYOUT IS FOR AN OPTIMIZED RETENTION FORCE OF CONNECTOR ON PCB BUT IT IMPLIES INSERTION FORCE THAT A LOT OF PICK AND PLACE MACHINES ARE NOT ABLE TO HANDLE. THEREFORE IT MIGHT BE NECESSARY TO DRILL BIGGER HOLES FOR THE CLIPS. PLEASE CHECK THIS CARFULLY. PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 APPROVAL: NPr UNIT: MM AS SCALE: SOLDERING QL SHEET: 1/3 FILE BY DRAW: AS I 27-OCT-14 GENERAL UPDATE H 01-APR-14 REV DATE DESCRIPTION: WR-COM - USB 3.0 HORIZONTAL TYPE A SIZE WERI PART NO: 692 121 030 100 A4 D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: NPr B DESCRIPTION: WR-COM - USB 3.0 HORIZONTAL TYPE A SIZE WERI PART NO: 692 121 030 100 A4 SCALE: SHEET: 2/3 A REV UNIT: MM DATE FILE BY DRAW: AS D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 1/1 REV DATE FILE BY DRAW: QL D