SANKEN ELECTRIC CO.,LTD Selection Guide Buck Switching Regulator ICs and Modules Liner Regulator (LDO) ICs Diode for peripheral circuit The all contents in this document are as of date of publication. Make sure that this is the latest revision of the document before use. Please check the details of the product by data sheet. http://www.sanken-ele.co.jp/en DCDC-SGE Feb.17,2016 P.1 CONTENTS Sanken’s Buck Regulator Outline Selection Guide Buck Switching Regulator Outline Synchronous Buck Switching Regulator Outline With Light-Load High Efficiency Function, Buck Switching Regulator Outline Linear Regulator (LDO) Outline Products Map of Buck Switching Regulators (VIN vs. IO) Products Non-synchronous Switching (Single output, Through hole mounting type) Non-synchronous Switching (Single output, Surface mounting type) Non-synchronous Switching (Mulch output) Synchronous Switching (Through hole mounting type) Synchronous Switching (Surface mounting type) Switching Regulator Modules (Through hole mounting type) Linear Regulator (LDO) ICs (Through hole mounting type) Linear Regulator (LDO) ICs (Surface Mount type) Products Information Non-synchronous Buck Switching Regulator ICs Products Information Synchronous Buck Switching Regulator IC Products Information Buck Switching Regulator Modules Products Information Linear Regulator (LDO) IC Products Information Package Information Freewheel Diodes For Buck Switching Regulator ICs IMPORTANT NOTES DCDC-SGE Feb.17,2016 P.3 P.4 P.5 P.6 P.7 P.8 P.9 P.11 P.13 P.14 P.15 P.16 P.17 P.18 P.20 P.54 P.61 P.67 P.78 P.84 P.87 P.2 Sanken’s Buck Regulator Outline Sanken has the buck regulators such as high efficiency switching regulator and low noise linear regulator. The PCB size can be reduced because the IC builds in the power transistors. Sanken has the modules that the IC, the peripheral components and the Inductor are included. Buck Switching Regulator Non-synchronous Switching Regulator Basic buck switching regulator . Simple control A freewheel diode is necessary (See P.83). Synchronous Switching Regulator No required of freewheel diode Space-saving High-Efficiency High frequency more than Non-synchronous switching Linear Regulator LDO DCDC-SGE Feb.17,2016 It is suitable for the use that switching noise can't be permitted. There are a few peripheral parts (Fixed output type). The difference in input and output is low (Low-drop out). Jump to more details P.3 Buck Switching Regulator Outline Non-synchronous/Synchronous Through hole mounting type Single output Module Fixed output voltage SI-8000E/S Adjustable output voltage type SI-8000GL/QL/FFE, NR880D, NR110D* Fixed & Adjustable output voltage type SI-8000JF/TFE/HFE/Y Fixed & Adjustable output voltage type Fully molded type (MPM01/04/80) Fixed output voltage Board mounted type(BR300, SI-8000L) Multiple output Surface mounting type Single output STA801M Fixed output voltage SI-8000W/JD/SD Adjustable output voltage type SI-8000TM/TMX/NHD/NHG /Q/FDE/FDL/HD, SPI-8000A, A4447SLJ NR880E, NR120E, NR110E*, NR130A*/S*, NR420A Multiple output SPI-8000TW, NR163N *With Light-load High efficiency Function DCDC-SGE Feb.17,2016 Jump to more details P.4 Synchronous Buck Switching Regulator Outline Using the synchronous topology achieves high efficiency and high switching operation more than nonsynchronous topology. Thus, small inductor can be used and the PCB size can be reduced. Synchronous Rectification Through hole mounting type NR887D MPM80 series Fully molded type Module with internal-inductor. MPM00 series Fully molded type Module with internal-inductor. Surface mounting type SI-8205NHD, SI-8205NHG NR885E NR420A series DCDC-SGE Feb.17,2016 Jump to more details P.5 With Light-Load High Efficiency Function, Buck Switching Regulator Outline Sanken’s buck switching regulators have high efficiency products in light load. The products has Lightload High Efficiency Function and achieves high efficiency of 85% max. (without this function, η=40% to 50%) With Light-load High Efficiency Function* Through hole mounting type NR111D η=68%, Io=20mA Surface mounting type NR110K η=70%, Io=30mA NR111E η=68%, Io=20mA NR119E η=68%, Io=20mA * Light-load High Efficiency Function, such as the pulse skip mode and the burst mode, reduce the circuit dissipation in light load condition by decreasing number of switching per unit time. NR131A η=85%, Io=10mA NR131S η=85%, Io=10mA The measurement condition of efficiency, η is VIN=12V, Vo=5V. DCDC-SGE Feb.17,2016 Jump to more details P.6 Linear Regulator (LDO) Outline Sanken has various linear regulators of IO=1A to 3A, PD=0.75W to 3W. The suitable LDO can be choice depending on your application. Through hole mounting type Adjustable output voltage type SI-3000KF / ZF series Adjustable output voltage type SI-3000LU, NR300E series Fixed & Adjustable output voltage type SI-3000KS / KM / KD / ZD series ~1.72W Surface mounting type ~3W DCDC-SGE Feb.17,2016 Jump to more details P.7 Products Map of Buck Switching Regulators (VIN vs. IO) 60 55 SI-8000TM SI-8000TMX SI-8000TFE SI-8000JD SI-8000JF Input voltage of Absolute maximum ratings, VIN (V) 50 SI-8000GL 35 30 SI-8205NHD / NHG SI-8000E SPI-8002TW SPI-8003TW NR163N SI-8000W SI-8501L NR119E NR117K MPM80 SI-8401L BR300 series series 25 SI-8000HFE SI-8000HD NR111E NR111D NR110K SI-8033S SI-8000Q SI-8000QL NR420A* NR121E NR885E NR887D SI-3000KS SI-3000KM SI-3000KD SI-3000LU MPM00 series SI-3000KF SI-3000KM SI-3000KD SPI-8001TW 20 SI-8000Y SI-8000FDE SI-8000FDL SI-8000FFE SI-8000S /SI-8000SD NR301E 15 SPI-8000A A4447SLJ 45 STA801M 40 Switching Regulator IC Linear Regulator IC ○Modules NR130A / S series 10 SI-3000ZF SI-3000ZD 5 *Under development 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 Output Current, Io( A) DCDC-SGE Feb.17,2016 Buck to top page P.8 Non-synchronous Switching (Single output, Through hole mounting type) 1/2 VIN(V) Io 0.6 A 1.5 A Frequency (kHz) VO(V) Products Light load high efficiency COUT Phase Ceramic compensation capacitor Package type Status Page Link P.21 Min Max Fixed Adjustable Fixed Adjust able SI-8050E 7 43 5.0 － 60 － － Internal － Active SI-8033JF 6.3 43 3.3 － 125 － － Internal － Active SI-8050JF 8 43 5.0 － 125 － － Internal － Active SI-8120JF 15 43 12.0 － 125 － － Internal － SI-8015JF Vo+3V 43 － 2.5 – 24 125 － － Internal － Active SI-8050TFE 8 43 5.0 － 300 － － Internal － Active SI-8008TFE 4.5 43 － 0.8 - 24 300 － － Internal － Active SI-8010GL 8 53 － 1 - 14 250 － － External － SI-8033S 5.5 35 3.3 － 60 － － Internal － Active SI-8050S 7 43 5.0 － 60 － － Internal － Active SI-8090S 12 43 9.0 － 60 － － Internal － SI-8120S 15 43 12.0 － 60 － － Internal － Active SI-8150S 18 43 15.0 － 60 － － Internal － Active TO-220F -5L P.22 Active P.23 3A DCDC-SGE Feb.17,2016 DIP8 TO-220F -5L Active Active Back to Buck Switching Regulator Outline P.24 P.25 P.9 Non-synchronous Switching (Single output, Through hole mounting type) 2/2 VIN(V) Io Frequency (kHz) VO(V) Products Light load high efficiency COUT Phase Ceramic compensation capacitor Status Page link Min Max Fixed Adjustable Fixed Adjust able SI-8105QL 4.75 30 － 0.5 - 24 350 － － External ○ DIP8 Active P.26 SI-8001FFE 4.5 43 － 0.8 - 24 300 － － Internal － TO-220F -5L Active P.27 NR111D 8 35 － 0.8 - 24 350 － ○ Internal ○ DIP8 Active P.28 SI-8050HFE 8 43 5.0 － 150 － － Internal － 3.5 A 4A Package type 5.5 A SI-8008HFE 4.5 43 － 0.8 – 24 150 － － Internal － SI-8050Y 8 45 5.0 － 130 － － External － SI-8010Y 8 45 － 1 - 15 130 － － External － 8A DCDC-SGE Feb.17,2016 TO-220F -5L TO-220F -7L Active P.29 Active Active P.30 Active Back to Buck Switching Regulator Outline P.10 Non-synchronous Switching (Single output, Surface mounting type) 1/2 VIN(V) Io Frequency (kHz) VO(V) Products SI-8033W Min Max Fixed Adjustable Fixed Adjust able 5.3 35 3.3 － 60 － Light load high efficiency － COUT Phase Ceramic compensation capacitor Internal － 0.6 A 1.5 A Status SI-8050W 7 35 5.0 － 60 － － Internal － NR117K 8 35 － 0.8 - 24 30 － － Internal ○ SI-8033JD 6.3 43 3.3 － 125 － － Internal － SI-8050JD 8 43 5.0 － 125 － － Internal － SI-8090JD 12 43 9.0 － 125 － － Internal － SI-8120JD 15 43 12.0 － 125 － － Internal － SI-8008TM 4.5 43 － 0.8 - 24 300 － － Internal － SI-8008TMX 4.5 43 － 0.8 - 24 300 － Iq(OFF) =1μA Internal － NR119E 6.5 35 － 0.8 - 24 364 － ○ Internal ○ A4447SLJ 8 50 － 0.8 - 24 － Fixed TOFF PRC － Internal － － － NR121E DCDC-SGE 4.5 Feb.17,2016 20 － 0.8 - 14 350 Page link Active P.31 SOP8 2.0 A 3.0 A Package type Active HSOP8 Active P.32 Active TO-263 -5L Active P.33 Active Active TO-252 -5L eSOIC8 Active P.34 Active P.35 Active P.36 Active P.37 Active P.38 eSOIC8 Internal ○ Back to Buck Switching Regulator Outline P.11 Non-synchronous Switching (Single output, Surface mounting type) 2/2 VIN(V) Io 3A Frequency (kHz) VO(V) Products COUT Phase Ceramic compensation capacitor Package type Status Page link Min Max Fixed Adjustable Fixed Adjust able NR131A 4.5 19 － 0.8 - 14 350 － ○ ○ Internal ○ eSOIC8 Active P.39 NR131S 4.5 19 － 0.8 - 14 350 － ○ ○ Internal ○ SOIC8 Active P.40 SI-8033SD 5.5 43 3.3 － 60 － － Internal － SI-8050SD 7 43 5.0 － 60 － － Internal － SPI-8010A 8 53 － 1 - 14 250 － － External － SI-8005Q 4.75 30 － 0.5 - 24 500 － － External ○ SI-8015Q 4.75 30 － 0.5 - 24 Vref :2% 500 － － External ○ SI-8001FDE 4.5 43 － 0.8 - 24 300 － － Internal － SI-8001FDL 4.5 43 － 0.8 - 24 300 － Iq(OFF) ≤0.2mA Internal － NR111E 6.5 35 － 0.8 - 24 350 － ○ Internal ○ NR110K 8 35 － 0.8 - 24 350 － ○ Internal SI-8008HD 4.5 43 － 0.8 - 24 150 － － Internal 3.5 A 4A 5.5 A Light load high efficiency DCDC-SGE Feb.17,2016 TO-2635L HSOP16 Active P.41 Active Active P.42 Active P.43 HSOP8 Active Active P.44 Active P.45 eSOIC8 Active P.46 ○ HSOP8 Active P.47 － TO-263 -5L Active P.48 TO-263 -5L Back to Buck Switching Regulator Outline P.12 Non-synchronous Switching (Mulch output) 2ch Outputs VIN(V) Io Products Min 0.5 A STA801M ch2 Vo+2 1.5 A SPI-8001TW 4.5 VO(V) Max 43 21 1.5 A SPI-8002TW 4.5 40 1.5 A SPI-8003TW 4.5 40 Ch Adjustable Ch1 5 Ch2 9 , 11.5, 12.1, 15.5 Selectable Ch1 1.0 - 16 Ch2 1.0 - 16 Ch1 1.0 - 24 Ch2 1.0 - 24 Ch1 1.0 - 24 Ch2 1.0 - 24 Frequency (kHz) Light load high efficiency COUT Phase Ceramic compensation capacitor Package type Status Page link P.49 125 － Internal － ZIP10 Through Active hole mounting 250 － Internal － Active P.50 P.51 250 － Internal － HSOP16 Surface Active mounting 200 - 400 － Internal － Active P.52 Frequency (kHz) Light load high efficiency Status Page link 550 － QFN20 Surface Active mounting P.53 3ch Outputs VIN(V) Io 1.5 A Products NR163N DCDC-SGE Min 4.5 Feb.17,2016 VO(V) Max 36 Ch Adjustable Ch1 0.8 - 24 Ch2 0.8 - 24 Ch3 0.8 - 24 COUT Phase Ceramic compensation capacitor Internal ○ Package type Back to Buck Switching Regulator Outline P.13 Synchronous Switching (Through hole mounting type) VIN(V) Io Frequency (kHz) VO(V) Products Light load high efficiency COUT Phase Ceramic compensation capacitor Min Max Fixed Adjustable Fixed Adjust able NR887D 4.5 20 － 0.8 - 14 500 － － Internal ○ MPM80* 8 35 － 3 - 16 630 － － Internal ○ MPM81* 8 35 3.3 － 630 － － Internal ○ MPM82* 8 35 5.0 － 630 － － Internal ○ MPM01* 9 41 － 1.8 - 12 250 － － Internal － 2A 3A Package type Status Page link DIP8 Active P.55 Active TO-220F -8L Active Active Active P.65 ZIP9 MPM04* 16 41 － 12 - 24 250 － － Internal － P.64 Active *Fully molded type Module with internal-inductor. DCDC-SGE Feb.17,2016 Back to Buck Switching Regulator Outline P.14 Synchronous Switching (Surface mounting type) VIN(V) Io VO(V) Products SI-8205NHD Frequency (kHz) Min Max Fixed Adjustable Fixed 8 46 － 0.5 - 24 － Adjust able 200 1000 3001000 External Sync Light load high efficiency COUT Phase Ceramic compensation capacitor External ○ － External ○ － Package type Status Page link Active P.56 Active P.57 HSOP8 SI-8205NHG 7 46 － 0.5 - 24 － NR885E 4.5 20 － 0.8 - 14 350 － － Internal ○ eSOIC8 Active P.58 NR421A 4.5 20 － 0.8 - 14 350 － － Internal ○ HSOP8 Under Development P.59 3A DCDC-SGE Feb.17,2016 Back to Buck Switching Regulator Outline P.15 Switching Regulator Modules (Through hole mounting type) The modules that the IC, the peripheral components and the Inductor are included. Since the inductance setup is unnecessary, circuit design becomes easy. VIN(V) Io Products Min 0.5 A 1A 2A Frequency (kHz) VO(V) Max Fixed Adjustable Fixed Type Adjustable Light load COUT high Ceramic efficiency capacitor SI-8401L 7 35 5.0 － 60 － Nonsynchronous SI-8501L 7 35 5.0 － 60 － Nonsynchronous － － BR300 8 35 5.0 － 350 － Nonsynchronous Nonsynchronous － ○ － ○ － － BR301 8 35 3.3 － 350 － MPM80 8 35 － 3 ~ 16 630 － Synchronous － ○ MPM81 8 35 3.3 － 630 － Synchronous － ○ MPM82 8 35 5.0 － 630 － Synchronous － ○ MPM01 9 41 － 1.8 ~ 12 250 － Synchronous － － 3A Package type Status 14.5x12.5x13.2 (mm) Active 4-Leads 26x26x18 (mm) Active 6-Leads 14x14x11 (mm) 4-Leads 16 41 － 12 ~ 24 250 － SI-8401L DC/DC conv. IC 負 荷 DCDC-SGE Feb.17,2016 MPM81 Synchronous SI-8501L － P.62 P.63 Active Active TO-220F-8L Active P.64 Active Active － BR300 P.61 Active P.65 ZIP9 MPM04 Page link Active MPM80 MPM00 負 荷 Back to Buck Switching Regulator Outline P.16 Linear Regulator (LDO) ICs (Through hole mounting type) VIN(V) Io VO(V) Products Min Max Fixed Adjustable VIN-Vo Minimum Differenti al Voltage (V) OCP Operation ON/OFF by external signal Pd (W) COUT Ceramic capacitor 1A SI-3010KF 2.4 35 － 1.1 - 16 0.6 Fold Back ○ 1.72 － 3A SI-3011ZF 2.4 10 － 1.2 - 5 0.7 Fold Back ○ 1.5 － DCDC-SGE Feb.17,2016 Package type TO-220F -5L Status Page link Active P.67 Active P.68 Back to Buck Switching Regulator Outline P.17 Linear Regulator (LDO) ICs (Surface Mount type) 1/2 VIN(V) Io 0.25 A VO(V) Products VIN-Vo Minimum Differenti al Voltage (V) OCP Operation ON/OFF by external signal Pd (W) COUT Ceramic capacitor Package type Status Page link SOT-89 -5L Active P.69 Min Max Fixed Adjustable SI-3012LU 2.4 18 － 1.5 - 15 0.5 Drooping ○ 0.75 ○ SI-3025KS 4.5 17 2.5 － 0.6 Drooping ○ 0.76 ○ SI-3033KS 5.3 17 3.3 － 0.6 Drooping ○ 0.76 ○ SI-3012KS 2.4 17 － 1.5 - 5 0.6 Drooping ○ 0.76 ○ Active SI-3025KM 3.1 17 2.5 － 0.6 Drooping ○ 1 ○ Active SI-3033KM 3.9 17 3.3 － 0.6 Drooping ○ 1 ○ Active SI-3012KM 2.4 17 － 1.5 - 5 0.6 Drooping ○ 1 ○ Active SI-3050KM 5.6 35 5.0 ― 0.6 Fold Back ○ 1 ○ SI-3090KM 9.6 35 9.0 － 0.6 Fold Back ○ 1 ○ 1A Active SOP8 TO-252 -5L Active Active P.72 12.6 35 12.0 － 0.6 Fold Back ○ 1 ○ Active SI-3010KM 2.4 35 － 1.5 - 5 0.6 Fold Back ○ 1 ○ Active SI-3033KD 3.9 17 3.3 － 0.6 Drooping ○ 3 － DCDC-SGE 2.4 Feb.17,2016 17 － 1.5 - 5 0.6 Drooping ○ 3 － P.71 Active SI-3120KM SI-3012KD P.70 TO-263 -5L Active P.73 Active Back to Buck Switching Regulator Outline P.18 Linear Regulator (LDO) ICs (Surface Mount type) 2/2 VIN(V) Io 1A VO(V) Products VIN-Vo Minimum Differenti al Voltage (V) OCP Operation ON/OFF by external signal Pd (W) COUT Ceramic capacitor Min Max Fixed Adjustable SI-3050KD 5.6 35 5.0 － 0.6 Fold Back ○ 3 － SI-3010KD 2.4 35 － 1.1 - 16 0.6 Fold Back ○ 3 － NR301E 2.7 30 － 1.1 - 16 0.6 Fold Back ○ 1.4 ○ SI-3033ZD 3.9 10 3.3 － 0.6 Fold Back ○ 3 － SI-3011ZD 2.4 10 － 1.2 - 5 0.6 Fold Back ○ 3 － 3A DCDC-SGE Feb.17,2016 Package type TO-263 -5L eSOIC8 TO-263 -5L Status Page link Active P.74 Active Active P.75 Active P.76 Active Back to Buck Switching Regulator Outline P.19 Non-synchronous Buck Switching Regulator ICs Products Information Simple Control Integrated Power MOSFET or Bipolar transistor for Hsw External Freewheel Diode Required (See P.83) L IC VIN CIN GND DCDC-SGE Feb.17,2016 VO HSW CONT D CO GND Buck to top page P.20 IO=0.6A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 0.6A • fOSC = 60kHz • Fixed output voltage type • Requires only 4 discrete components • Protections (OCP, TSD) SI-8050E TO-220F-5L ■Outline Frequency Product IO SI-8050E 0.6A Light load Normal load － 60kHz Ref. Voltage VO － 5.00V ■Pin Assignment Protection Functions VIN (Recommended) 7 ~ 40V Efficiency 80% OCP TSD Drooping Auto -restart ■Circuit (1) VIN：Voltage Input (2) SWOUT： Switching output (3) GND：Ground (4) VOS： Detection of output voltage (5) NC：No Connection (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.21 IO=1.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 1.5A • fOSC = 125kHz • Requires only 4 discrete components (Fixed output voltage type) • Output ON/OFF function • Protections (OCP, TSD) SI-8000JF series TO-220F-5L ■Outline Products Frequency IO Light load Normal load SI-8015JF SI-8033JF 1.5A － Ref. Voltage VO (Recommended) 1.59V 2.5 ~ 24V VO+2 ~ 40V 88% － 3.30V 5.3 ~ 40V 77% VIN Efficiency 125kHz SI-8050JF － 5.00V 7 ~ 40V 82% SI-8120JF － 12.00V 14 ~ 40V 88% ■Pin Assignment (1) DCDC-SGE Protection Functions OCP TSD Fold Back Auto -restart ■Circuit (5) (1) VIN：Voltage Input (2) SWOUT： Switching output (3) GND： Ground (4) VS(VREF)： Detection of output voltage or (Feedback Signal Input) (5) ON/OFF：Vo ON/ OFF Control Feb.17,2016 Back to Non-synchronous Switching P.22 IO=1.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 1.5A • fOSC = 300kHz • Requires only 4 discrete components (Fixed output voltage type) • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) SI-8000TFE series TO-220F-5L ■Outline Products Frequency IO Light load Normal load SI-8050TFE 1.5A － SI-8008TFE Ref. Voltage VO (Recommended) － 5.00V 8 ~ 40V 300kHz 0.8V ■Pin Assignment 8 ~ 24V VIN VO+3 or 4.5 ~ 40V Efficiency 81% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (1) IN：Voltage Input (2) SWOUT：Switching Output (3) GND：Ground (4) ADJ：Feedback Signal Input (5) SS：Soft-start & Vo ON/OFF Control (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.23 IO=1.5A, VIN=53V Non-synchronous Buck Switching Regulator IC ■ Features • VIN = 53V (max.) • IO = 20mA to 1.5A • fOSC = 250kHz • Adjustable output voltage type • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) SI-8010GL DIP8 ■Outline Frequency Products IO Light load Normal load － 250kHz 20mA 1.5A SI-8010GL Ref. Voltage VO 1.00V 1.0 ~ 14V ■Pin Assignment (1) GND CE/SS Reg SWOUT DCDC-SGE Protection Functions VIN (Recommended) VO+3 or 8 ~ 50V Efficiency 86% OCP TSD Drooping Auto -restart ■Circuit (8) VREF Comp B.S VIN Feb.17,2016 (1) GND：Ground (2) CE/SS：Vo ON/OFF & Soft-start (3) Reg：Internal Regulator Output (4) SWOUT：Switching Output (5) VIN：Voltage Input (6) B.S：Supply voltage for Gate drive (7) Comp：External Phase Compensation (8) VREF：Feedback Signal Input Back to Non-synchronous Switching P.24 IO=1.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3A • fOSC = 60kHz • Fixed output voltage type • Requires only 4 discrete components • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) SI-8000S series TO-220F-5L ■Outline Frequency Ref. Voltage VO (Recommended) SI-8033S － 3.30V 5.5 ~ 28V 79% SI-8050S － 5.00V 7 ~ 40V 84% － 9.00V 12 ~ 40V 82% SI-8120S － 12.00V 15 ~ 40V 90% SI-8150S － 15.00V 18 ~ 40V 91% Products IO SI-8090S Light load 3A － Normal load 60kHz ■Pin Assignment VIN Efficiency Protection Functions OCP TSD Drooping Auto -restart ■Circuit (1) VIN：Voltage Input (2) SWOUT：Switching Output (3) GND：Ground (4) VOS： Detection of output voltage (5) S.S： Soft-start & Vo ON/OFF Control (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.25 IO=3.5A, VIN=30V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3.5A • fOSC = 350kHz • Adjustable output voltage type • Current mode control • Ceramic output capacitor can be used • Soft-start function • Output ON/OFF function (Active-high) • Protections (OCP, TSD) SI-8105QL DIP8 ■Outline Frequency Product IO SI-8105QL Light load Normal load － 350kHz 3.5A Ref. Voltage VO 0.5V 0.5 ~ 24V ■Pin Assignment (1) (Recommended) VO+3 or 4.75 ~ 28V Efficiency 90% OCP TSD Drooping Auto -restart ■Circuit (8) BS SS IN SW GND EN DCDC-SGE Protection Functions VIN COMP FB Feb.17,2016 (1) BS： Supply voltage for Gate drive (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) COMP：External Phase Compensation (7) EN：Vo ON/OFF Control (8) SS：Soft-start Back to Non-synchronous Switching P.26 IO=3.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3.5A • fOSC = 300kHz • Adjustable output voltage type • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) SI-8001FFE TO-220F-5L ■Outline Frequency Product IO SI-8001FFE 3.5A Light load Normal load － 300kHz ■Pin Assignment Ref. Voltage VO 0.8V 0.8 ~ 24V Protection Functions VIN (Recommended) VO+3 or 4.75 ~ 40V Efficiency 83% OCP TSD Drooping Auto -restart ■Circuit (1) IN：Voltage Input (2) SW：Switching Output (3) GND：Ground (4) ADJ：Feedback Signal Input (5) SS：Vo ON/OFF & Soft-start (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.27 IO=4A, VIN=35V Non-synchronous Buck Switching Regulator IC ■ Features NR111D • • • • DIP8 • • • • • • ■Outline Product IO NR111D 4A Frequency Light load Normal load Ref. Voltage Pulse Skip 350kHz 0.8V ■Pin Assignment (1) VIN VO (Recommended) 0.8 ~ 24V 6.5 ~ 31V Efficiency 94% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (8) BS SS IN SW GND EN DCDC-SGE IO = 4A FSW =350kHz Adjustable output voltage type High efficiency by pulse skip operation in light load Light load efficiency, η = 68% max.(IO = 20mA , VIN=12V, VO=5V) Current mode control Ceramic capacitor can be used Soft-start function Output ON/OFF function Protections (OCP, TSD, UVLO) Adjustable OCP current by ISET terminal(connect to RISET) Low component counts by internal phase compensation circuit Iset FB Feb.17,2016 (1) BS： Supply voltage for Gate drive (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) Iset：External OCP Adjustment (7) EN：Vo ON/OFF Control (8) SS：Soft-start NR111D Back to Non-synchronous Switching P.28 IO=5.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 5.5A • fOSC = 150kHz • Requires only 5 discrete components (Fixed output voltage type) • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) SI-8000HFE series TO-220F-5L ■Outline Products Frequency IO Light load Normal load SI-8050HFE 5.5A － SI-8008HFE Ref. Voltage VO (Recommended) － 5.00V 8 ~ 40V 150kHz 0.8V ■Pin Assignment DCDC-SGE VO+3 or 4.5 ~ 40V Efficiency 83% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (1) VIN：Voltage Input (2) SWOUT：Switching Output (3) GND：Ground (4) VOS(ADJ)： Detection of output voltage or (Feedback Signal Input) (5) SS：Soft-start & Vo ON/OFF Control (1) 8 ~ 24V VIN SI-8008HFE (5) Feb.17,2016 Back to Non-synchronous Switching P.29 IO=8A, VIN=45V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 8A • fOSC =130kHz • Current mode control • Soft-start function • Output ON/OFF function • Protections (OCP, TSD, UVLO) SI-8000Y series TO-220F-7L ■Outline Products Frequency IO Light load Normal load SI-8050Y 8A － SI-8010Y Ref. Voltage VO (Recommended) － 5.00V 8 ~ 43V 130kHz 1.0V ■Pin Assignment (1) DCDC-SGE 1 ~ 15V VIN VO+3 or 8 ~ 43V Efficiency 86% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (7) (1) BS： Supply voltage for Gate drive (2) SW：Switching Output (3) IN：Voltage Input (4) GND：Ground (5) COMP：External Phase Compensation (6) FB：Feedback Signal Input (7) EN/SS：Vo ON/OFF Control & Soft-start Feb.17,2016 Back to Non-synchronous Switching P.30 IO=0.6A, VIN=35V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 0.6A • fOSC = 60kHz • Fixed output voltage type • Requires only 4 discrete components • Protections (OCP, TSD) SI-8000W series SOP8 ■Outline Products Frequency IO Light load Normal load Ref. Voltage SI-8033W － 0.6A 60kHz (Recommended) 3.30V 5.3 ~ 28V 5.00V ■Pin Assignment 7 ~ 33V Protection Functions OCP TSD Drooping Auto -restart 75% 80% ■Circuit (8) VIN GND NC SW VOS GND GND DCDC-SGE Efficiency － SI-8050W (1) VIN VO GND Feb.17,2016 (1) VIN：Voltage Input (2) NC：No Connection (3) SW：Switching Output (4) VOS： Detection of output voltage (5) GND：Ground (6) GND：Ground (7) GND：Ground (8) GND：Ground Back to Non-synchronous Switching P.31 IO=.5A, VIN=30V, Light load High Efficiency Non-synchronous Buck Switching Regulator IC ■ Features NR117K • • • • HSOP8 • • • • • • ■Outline Products IO NR117K 1.5A Frequency Light load Normal load Ref. Voltage Pulse Skip 30kHz 0.8V ■Pin Assignment (1) BS IN SW GND DCDC-SGE IO = 1.5A FSW =30kHz Adjustable output voltage type High efficiency by pulse skip operation in light load Light Load efficiency, η = 68% max.(IO = 10mA , VIN=12V, VO=5V) Current mode control Ceramic capacitor can be used Soft-start function Output ON/OFF function Protections (OCP, TSD, UVLO) Adjustable OCP current by ISET pin (connect to RISET) Low component counts by internal phase compensation circuit VIN VO (Recommended) 0.8 ~ 24V 8 ~ 31V Efficiency 87% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (8) SS EN Iset FB Feb.17,2016 (1) BS： Supply voltage for Gate drive (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) Iset：External OCP Adjustment (7) EN：Vo ON/OFF Control (8) SS：Soft-start NR117K Back to Non-synchronous Switching P.32 IO=1.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 1.5A • fOSC = 125kHz • Fixed output voltage • Requires only 4 discrete components • Output ON/OFF function • Protections (OCP, TSD) SI-8000JD series TO-263-5L ■Outline Products Frequency IO Light load Normal load SI-8033JD SI ~ 8050JD － 1.5A Ref. Voltage VO (Recommended) － 3.30V 5.3 ~ 40V 77% － 5.00V 7 ~ 40V 82% VIN Efficiency 125kHz SI-8090JD － 9.00V 11 ~ 40V 86% SI-8120JD － 12.00V 14 ~ 40V 88% ■Pin Assignment Protection Functions OCP TSD Fold Back Auto -restart ■Circuit (1) VIN：Voltage Input (2) SWOUT：Switching Output (3) GND：Ground (4) VOS： Detection of output voltage (5) ON/OFF：Vo ON/OFF Control (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.33 IO=1.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 1.5A • fOSC =300kHz • Adjustable output voltage type • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) SI-8008TM TO-252-5L ■Outline Frequency Product SI-8008TM IO 1.5A Light load Normal load － 300kHz Ref. Voltage VO 0.8V 0.8 ~ 24V ■Pin Assignment Protection Functions VIN (Recommended) Vo+3 or 4.5 ~ 40V Efficiency 81% OCP TSD Drooping Auto -restart ■Circuit (1) IN：Voltage Input (2) SW：Switching Output (3) GND：Ground (4) ADJ：Feedback Signal Input (5) SS：Soft-start & Vo ON/OFF Control (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.34 IO=1.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 1.5A • fOSC = 300kHz • Adjustable output voltage type • Output ON/OFF function (Iq(OFF) = 1µA) • Protections (OCP, TSD) SI-8008TMX TO-252-5L ■Outline Frequency Product SI-8008TMX IO 1.5A Light load Normal load － 300kHz ■Pin Assignment Ref. Voltage VO 0.8V 0.8 ~ 24V Protection Functions VIN (Recommended) Vo+3 or 4.5 ~ 40V Efficiency 81% OCP TSD Drooping Auto -restart ■Circuit (1) IN：Voltage Input (2) SW：Switching Output (3) GND：Ground (4) ADJ：Feedback Signal Input (5) VC：Vo ON/OFF Control (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.35 IO=2A, VIN=35V, Light load High Efficiency Non-synchronous Buck Switching Regulator IC ■ Features • IO = 2A • FSW =364kHz • Adjustable output voltage type • High efficiency by pulse skip operation in light load Light Load efficiency, η = 68% max.(IO = 20mA , VIN=12V, VO=5V) • Current mode control • Ceramic capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD, UVLO) Adjustable OCP current by ISET pin (connect to RISET) • Low component counts by internal phase compensation circuit NR119E eSOIC8 ■Outline Product IO NR119E 2A Frequency Light load Normal load Ref. Voltage Pulse Skip 364kHz 0.8V ■Pin Assignment (1) BS IN SW GND DCDC-SGE VIN VO (Recommended) 0.8 ~ 24V 6.5 ~ 31V Efficiency 94% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (8) SS EN Iset FB Feb.17,2016 (1) BS： Supply voltage for Gate drive (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) Iset：External OCP Adjustment (7) EN：Vo ON/OFF (8) SS：Soft-start NR119E Back to Non-synchronous Switching P.36 IO=2A, VIN=50V Non-synchronous PRC Controlled Buck Switching Regulator IC ■ Features • IO = 2A • Adjustable output voltage type • PRC system of Fixed tOFF • Adjustable Frequency (Fixed tOFF) • Ceramic output capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD, UVLO) A4447SLJ eSOIC8 ■Outline Frequency Product IO A4447SLJ Light load Normal load － Fixed- tOFF PRC control 2A Ref. Voltage VO 0.8V 0.8 ~ 24V ■Pin Assignment (1) BOOT (Recommended) tOFF 45V ±15% OCP TSD Fold Back Auto -restart ■Circuit (8) VIN ENB TSET LX GND FB DCDC-SGE Protection Functions VIN VBIAS Feb.17,2016 (1) BOOT：Supply voltage for Gate drive (2) ENB：Vo ON/OFF Control (3) TSET：Frequency Control (4) GND：Ground (5) FB：Feedback Signal Input (6) VBIAS：Detection of Output Voltage (7) LX：Switching Output (8) VIN：Voltage Input Back to Non-synchronous Switching P.37 IO=3A, VIN=20V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3A • FSW =350kHz • Adjustable output voltage type • Current mode control • Ceramic output capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD, UVLO) • Low component counts by internal phase compensation circuit NR121E eSOIC8 ■Outline Frequency Product IO NR121E Light load Normal load Ref. Voltage － 350kHz 0.8V 3A ■Pin Assignment (1) BS IN SW GND DCDC-SGE Protection Functions VIN VO (Recommended) 0.8 ~ 14V 4.5 ~ 8V Efficiency 94% OCP TSD Drooping Auto -restart ■Circuit (8) SS EN NC FB Feb.17,2016 (1) BS：Supply voltage for Gate drive (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) NC：No Connection (7) EN：Vo ON/OFF Control (8) SS：Soft-start NR121E Back to Non-synchronous Switching P.38 IO=3A, VIN=19V, Light load High Efficiency Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3A • FSW = 350kHz • Adjustable output voltage type • High efficiency by pulse skip operation in light load Light Load efficiency, η = 85% max.(IO=10mA, VIN=12V, VO=5V) • Current mode control • Ceramic capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD, UVLO) • Low component counts by internal phase compensation circuit NR130A series eSOIC8 ■Outline Product IO NR131A 3A Frequency Light load Normal load Ref. Voltage Pulse Skip 350kHz 0.8V ■Pin Assignment (1) (Recommended) 0.8 ~ 14V 4.5 ~ 17V Efficiency 95% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (8) NC BS IN SW GND SS DCDC-SGE VIN VO EN FB Feb.17,2016 (1) NC：No Connection (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) EN：Vo ON/OFF Control (7) SS：Soft-start (8) BS：Supply voltage for Gate drive NR131A Back to Non-synchronous Switching P.39 IO=3A, VIN=19V, Light load High Efficiency Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3A • FSW = 350kHz • Adjustable output voltage type • High efficiency by pulse skip operation in light load Light Load efficiency, η = 85% max.(IO=10mA, VIN=12V, VO=5V) • Current mode control • Ceramic capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD, UVLO) • Low component counts by internal phase compensation circuit NR130S series SOIC8 ■Outline Product IO NR131A 3A Frequency Light load Normal load Ref. Voltage Pulse Skip 350kHz 0.8V ■Pin Assignment (1) (Recommended) 0.8 ~ 14V 4.5 ~ 17V Efficiency 95% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (8) NC BS IN SW GND SS DCDC-SGE VIN VO EN FB Feb.17,2016 (1) NC：No Connection (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) EN：Vo ON/OFF Control (7) SS：Soft-start (8) BS：Supply voltage for Gate drive NR130S Back to Non-synchronous Switching P.40 IO=3A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3A • fOSC = 60kHz • Fixed output voltage • Requires only 4 discrete components • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) SI-8000SD series TO-263-5L ■Outline Products Frequency IO Light load Normal load Ref. Voltage SI-8033SD － 3A 60kHz VIN VO (Recommended) 3.30V 5.5 ~ 28V Efficiency 5.00V ■Pin Assignment 7 ~ 40V OCP TSD Drooping Auto -restart 77% － SI-8050SD Protection Functions 82% ■Circuit (1) VIN：Voltage Input (2) SWOUT：Switching Output (3) GND：Ground (4) VOS：Detection of Output Voltage (5) S.S：Vo ON/OFF Control & Soft-start (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.41 IO=3A, VIN=53V Non-synchronous Buck Switching Regulator IC ■ Features • VIN = 53V(max.) • IO = 20mA to 3A • fOSC = 250kHz • Adjustable output voltage type • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) SPI-8010A HSOP16 ■Outline Frequency Product SPI-8010A IO 20mA-3A Light load Normal load － 250kHz Ref. Voltage VO 1.0V 1.0 ~ 14V ■Pin Assignment (Recommended) VO+3 or 8 ~ 50V Efficiency 86% OCP TSD Fold Back Auto -restart ■Circuit (1) (16) (8) (9) DCDC-SGE Protection Functions VIN (1) AGND：Signal Ground (2) (6) (8) ～(10) (13) (16) NC：No Connection (3) DGND：Drive Circuit Ground (4) CE/SS：Vo ON/OFF Control & Soft-start (5) Reg：Internal Regulator Output (7) SWOUT：Switching Output (11) VIN：Voltage Input (12) BS： Supply voltage for Gate drive (14) COMP：External Phase Compensation (15) VREF：Feedback Signal Input Feb.17,2016 Back to Non-synchronous Switching P.42 IO=3.5A, VIN=30V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3.5A • fOSC = 500kHz • Adjustable output voltage type • Current mode control • Ceramic output capacitor can be used • Soft-start function • Output ON/OFF function (Active-high) • Protections (OCP, TSD) SI-8000Q series HSOP8 ■Outline Products Frequency IO Light load Normal load SI-8005Q Ref. Voltage VO 0.5V±3% － 3.5A SI-8015Q 500kHz 0.5 ~ 24V 0.5V±2% ■Pin Assignment (1) BS IN SW GND DCDC-SGE VIN (Recommended) VO+3 or 4.75 ~ 28V Efficiency 90% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (8) SS EN COMP FB Feb.17,2016 (1) BS： Supply voltage for Gate drive (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) COMP：External Phase Compensation (7) EN：Vo ON/OFF Control (8) SS：Soft-start Back to Non-synchronous Switching P.43 IO=3.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3.5A • fOSC = 300kHz • Adjustable output voltage type • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) SI-8001FDE TO-263-5L ■Outline Frequency Product SI-8001FDE IO 3.5A Light load Normal load － 300kHz Ref. Voltage VO 0.8V 0.8 ~ 24V ■Pin Assignment Protection Functions VIN (Recommended) VO+3 or 4.5 ~ 40V Efficiency 83% OCP TSD Drooping Auto -restart ■Circuit (1) IN：Voltage Input (2) SW：Switching Output (3) GND：Ground (4) ADJ：Feedback Signal Input (5) S.S：Soft-start & Vo ON/OFF Control (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.44 IO=3.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 3.5A • fOSC = 300kHz • Adjustable output voltage type • Output ON/OFF function (Active-low, Iq(OFF) ≤ 200µA) • Protections (OCP, TSD) SI-8001FDL TO-263-5L ■Outline Frequency Product SI-8001FDL IO 3.5A Light load Normal load － 300kHz ■Pin Assignment Ref. Voltage VO 0.8V 0.8 ~ 24V Protection Functions VIN (Recommended) VO+3 or 4.5 ~ 40V Efficiency 83% OCP TSD Drooping Auto -restart ■Circuit (1) IN：Voltage Input (2) SW：Switching Output (3) GND：Ground (4) ADJ：Feedback Signal Input (5) VC：Vo ON/OFF Control (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.45 IO=4A, VIN=35V, Light load High Efficiency Non-synchronous Buck Switching Regulator IC ■ Features NR111E • • • • eSOIC8 • • • • • ■Outline • Product IO NR111E 4A Frequency Light load Normal load Ref. Voltage Pulse Skip 350kHz 0.8V ■Pin Assignment (1) BS IN SW GND DCDC-SGE IO = 4A FSW =350kHz Adjustable output voltage type High efficiency by pulse skip operation in light load Light Load efficiency, η = 68% max.(IO = 20mA, VIN=12V, VO=5V) Current mode control Ceramic capacitor can be used Soft-start function Output ON/OFF function Protections (OCP, TSD, UVLO) Adjustable OCP current by ISET pin (connect to RISET) Low component counts by internal phase compensation circuit VIN VO (Recommended) 0.8 ~ 24V 6.5 ~ 31V Efficiency 94% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (8) SS EN Iset FB Feb.17,2016 (1) BS： Supply voltage for Gate drive (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) Iset：External OCP Adjustment (7) EN：Vo ON/OFF (8) SS：Soft-start NR111E Back to Non-synchronous Switching P.46 IO=4A, VIN=35V, Light load High Efficiency Non-synchronous Buck Switching Regulator IC ■ Features NR110K • • • • HSOP8 • • • • • ■Outline • Product IO NR110K 4A Frequency Light load Normal load Ref. Voltage Pulse Skip 350kHz 0.8V ■Pin Assignment (1) BS IN SW GND DCDC-SGE IO = 4A FSW =350kHz Adjustable output voltage type High efficiency by pulse skip operation in light load Light Load efficiency, η = 70% max.(IO = 30mA, VIN=12V, VO=5V) Current mode control Ceramic capacitor can be used Soft-start function Output ON/OFF function Protections (OCP, TSD, UVLO) Adjustable OCP current by ISET pin (connect to RISET) Low component counts by internal phase compensation circuit VIN VO (Recommended) 0.8 ~ 24V 8 ~ 31V Efficiency 94% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (8) SS EN Iset FB Feb.17,2016 (1) BS： Supply voltage for Gate drive (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) Iset：External OCP Adjustment (7) EN：Vo ON/OFF (8) SS：Soft-start NR110K Back to Non-synchronous Switching P.47 IO=5.5A, VIN=43V Non-synchronous Buck Switching Regulator IC ■ Features • IO = 5.5A • fOSC = 150kHz • Adjustable output voltage type • Soft start function • Output ON/OFF function • Protections (OCP, TSD) SI-8008HD TO-263-5L ■Outline Frequency Product SI-8008HD IO 5.5A Light load Normal load － 150kHz Ref. Voltage VO 0.8V 0.8 ~ 24V ■Pin Assignment Protection Functions VIN (Recommended) VO+3 or 4.5 ~ 40V Efficiency 83% OCP TSD Drooping Auto -restart ■Circuit (1) IN：Voltage Input (2) SW：Switching Output (3) GND：Ground (4) ADJ：Feedback Signal Input (5) SS：Soft-start & Vo ON/OFF Control (1) DCDC-SGE (5) Feb.17,2016 Back to Non-synchronous Switching P.48 IO=0.5A×2, VIN=43V 2ch Non-synchronous Buck Switching Regulator IC ■ Features • IO = 0.5A×2 • fOSC = 125kHz • Fixed output voltage • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) STA801M ZIP10 ■Outline Products Frequency IO Light load Normal load Ch1 － STA801M Ch2 ■Pin Assignment (1) DCDC-SGE (10) Ref. Voltage VO 0.5A 5V 0.5A 9V,11.5V, 12.1V,15.5V selectable 125kHz (1) VO2 Cont：VO2 Output Voltage Control (2) VOS1：Detection of Output Voltage VO1 (3) SS1：Ch1 Soft-start (4) SWOUT1：Ch1 Switching Output (5) GND：Ground (6) VIN：Voltage Input (7) SWOUT2：Ch2 Switching Output (8) SS2：Ch2 Soft-start (9) VOS2-1：Ch2 VO2 Selector 1 (10) VOS2-2：Ch2 VO2 Selector 2 Feb.17,2016 VIN (Recommended) Ch2 VOMAX+2 ~ 40V Efficiency 80% Protection Functions OCP TSD Drooping Auto -restart ■Circuit Back to Non-synchronous Switching P.49 IO=1.5A×2, VIN=21V 2ch Non-synchronous Buck Switching Regulator IC ■ Features • IO = 1.5A×2ch. • fOSC = 250kHz • Adjustable output voltage type • Soft-start function • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SPI-8001TW HSOP16 ■Outline Products CH Frequency Light load Normal load Ch1 － SI-8001TW Ch2 ■Pin Assignment (1) (16) (8) (9) DCDC-SGE Ref. Voltage VO 1.5A 1~16V *VREF=1.0V 250kHz 1.5A (1) AGND：Signal Ground (2) VIN1：Ch1 Voltage Input (3) VCC：Supply Voltage for IC (4) SWOUT1：Ch1 Switching Output (5) DGND1：Ch1 Drive Circuit Ground (6) SS1：Ch1 Soft-start (7) VREF1：Ch1 Feedback Signal Input (8) (16) NC：No Connection (9) AGND：Signal Ground (10) VREF2：Ch2 Feedback Signal Input (11) SS2：Ch2 Soft-start (12) DGND2：Ch2 Drive Circuit Ground (13) SWOUT2：Ch2 Switching Output,(14) C/E：Vo ON/OFF Control (15) VIN2：Ch2 Voltage Input Feb.17,2016 1~16V *VREF=1.0V VIN (Recommended) Vo+3 ~ 20V Efficiency 80% Protection Functions OCP TSD Fold Back Auto -restart ■Circuit Back to Non-synchronous Switching P.50 IO=1.5A×2, VIN=40V 2ch Non-synchronous Buck Switching Regulator IC ■ Features • IO = 1.5A×2ch. • fOSC = 250kHz • Adjustable output voltage type • Soft-start function • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SPI-8002TW HSOP16 ■Outline Products CH Frequency Light load Normal load Ch1 － SI-8002TW Ch2 ■Pin Assignment (1) (16) (8) (9) DCDC-SGE Ref. Voltage VO 1.5A 1~24V *VREF=1.0V 250kHz 1.5A (1) AGND：Signal Ground (2) VIN1：Ch1 Voltage Input (3) VCC：Supply Voltage for IC (4) SWOUT1：Ch1 Switching Output (5) DGND1：Ch1 Drive Circuit Ground (6) SS1：Ch1 Soft-start (7) VREF1：Ch1 Feedback Signal Input (8) (16) NC：No Connection (9) AGND：Signal Ground (10) VREF2：Ch2 Feedback Signal Input (11) SS2：Ch2 Soft-start (12) DGND2：Ch2 Drive Circuit Ground (13) SWOUT2：Ch2 Switching Output,(14) C/E：Vo ON/OFF Control (15) VIN2：Ch2 Voltage Input Feb.17,2016 1~24V *VREF=1.0V VIN (Recommended) Vo+3 ~ 38V Efficiency 78% Protection Functions OCP TSD Fold Back Auto -restart ■Circuit Back to Non-synchronous Switching P.51 IO=1.5A×2, VIN=40V 2ch Non-synchronous Buck Switching Regulator IC ■ Features • IO = 1.5A×2ch. • Adjustable switching frequency: fOSC = 200kHz to 400kHz • Adjustable output voltage type • Soft-start function • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SPI-8003TW HSOP16 ■Outline Products CH Frequency Light load Normal load Ch1 － SI-8003TW Ch2 ■Pin Assignment (1) (16) (8) (9) DCDC-SGE Ref. Voltage VO 1.5A 1~24V *VREF=1.0V 250kHz 1.5A (1) AGND： Signal Ground (2) VIN1：Ch1 Voltage Input (3) VCC： Supply Voltage for IC (4) SWOUT1：Ch1 Switching Output (5) DGND1：Ch1 Drive Circuit Ground (6) SS1：Ch1 Soft-start (7) VREF1：Ch1 Feedback Signal Input (8) COSC：Capacitor for Frequency Adjustment (9) AGND： Signal Ground (10) ROSC：Resistor for Frequency Adjustment (11) VREF2：Ch2 Feedback Signal Input (12) SS2：Ch2 Soft-start (13) DGND2：Ch2 Drive Circuit Ground,(14) SWOUT2：Ch2 Switching Output (15) C/E： Vo ON/OFF Control (16) VIN2：Ch2 Voltage Input Feb.17,2016 1~24V *VREF=1.0V VIN (Recommended) Vo+3 ~ 38V Efficiency 78% Protection Functions OCP TSD Fold Back Auto -restart ■Circuit Back to Non-synchronous Switching P.52 IO=1.5A×3, VIN=36V 3ch Non-synchronous Buck Switching Regulator IC ■ Features • IO = 1.5A×3ch • fOSC = 550kHz • Adjustable output voltage type • Multi-phase switching (Phase-shift 120 deg.) • Ceramic output capacitor can be used • Soft-start control function • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD, UVLO) NR163N QFN20 ■Outline Products NR163N CH IO ch1 1.5A ch2 1.5A ch3 1.5A ■Pin Assignment Frequency 550kHz Ref. Voltage 0.8V VO 0.8 ~ 24V Protection Functions VIN (Recommended) 4.7 ~ 34V Efficiency 84% *VIN=12V, Vo=5V Io=1A OCP TSD Fold Back Auto -restart ■Circuit NR163N DCDC-SGE Feb.17,2016 Back to Non-synchronous Switching P.53 Synchronous Buck Switching Regulator IC Products Information Synchronous Rectification achieves high efficiency No required of External freewheel diode Integrated power MOSFET for Hsw and Lsw Reducing PCB size Reducing inductor size reduction by realizing High frequency HSW IC L VIN VO CIN CONT GND DCDC-SGE LSW CO GND Feb.17,2016 Buck to top page P.54 IO=2A, VIN=20V Synchronous Buck Switching Regulator IC ■ Features • IO = 2A • FSW =500kHz • Adjustable output voltage type • Synchronous rectification • Current mode control • Ceramic capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) • Low component counts by internal phase compensation circuit NR887D DIP8 ■Outline Product IO NR887D 2A Frequency Light load Normal load Ref. Voltage － 500kHz 0.8V ■Pin Assignment (1) (Recommended) 0.8 ~ 14V 4.5 ~ 18V Efficiency 94% Protection Functions OCP TSD Drooping Auto -restart ■Circuit (8) BS SS IN SW GND EN DCDC-SGE VIN VO NC FB Feb.17,2016 (1) BS： Supply voltage for Gate drive (2) IN：Voltage Input (3) SW：Switching Output (4) GND：Ground (5) FB：Feedback Signal Input (6) NC：No Connection (7) EN：Vo ON/OFF Control (8) SS：Soft-start NR887D Back to Synchronous Switching P.55 IO=3A, VIN=46V Synchronous Buck Switching Regulator IC ■ Features • IO = 3A • Adjustable switching frequency: fOSC = 200kHz to 1MHz • Adjustable output voltage type • Synchronous rectification • Current mode control • Ceramic output capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD, UVLO) SI-8205NHD HSOP8 ■Outline Frequency Product IO SI-8205NHD 3A Light load Normal load － 200kHz ~ 1MHz Adjustable Ref. Voltage VO 0.8V±1% 0.5 ~ 24V ■Pin Assignment (1) GND EN/SS VIN FSET DCDC-SGE VIN (Recommended) VO+3 or 8 ~ 43V Protection Functions Efficiency 90% OCP TSD Drooping Auto -restart ■Circuit (1) GND：Ground (2) EN/SS：Vo ON/OFF Control SW and Soft-start (3) VIN：Voltage Input BS (4) FSET：Frequency Adjustment FB (5) COMP：External COMP Phase Compensation (6) FB：Feedback Signal Input (7) BS： Supply voltage for Gate drive (8) SW：Switching Output (8) Feb.17,2016 Back to Synchronous Switching P.56 IO=3A, VIN=46V, External Frequency Synchronization Synchronous Buck Switching Regulator IC ■ Features • IO = 3A • External Frequency Synchronization: fSYNC = 300kHz to 1MHz • Adjustable output voltage type • Synchronous rectification • Current mode control • Ceramic output capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD, UVLO) SI-8205NHG HSOP8 ■Outline Frequency Product IO SI-8205NHG 3A Light load Normal load － 300kHz ~ 1MHz Ext-sync Ref. Voltage VO 0.8V±1% 0.5 ~ 24V ■Pin Assignment (1) GND EN/SS VIN SYNC DCDC-SGE VIN (Recommended) VO+3 or 8 ~ 43V Protection Functions Efficiency 90% OCP TSD Drooping Auto -restart ■Circuit (1) GND： Ground (2) EN/SS：Vo ON/OFF Control SW & Soft-start (3) VIN： Voltage Input BS (4) SYNC：External synchronization FB Input COMP (5) COMP：External Phase Compensation (6) FB：Feedback Signal Input (7) BS： Supply voltage for Gate drive (8) SW：Switching Output (8) Feb.17,2016 Back to Synchronous Switching P.57 IO=3A, VIN=20V Synchronous Buck Switching Regulator IC ■ Features • IO = 3A • FSW =350kHz • Adjustable output voltage type • Synchronous rectification • Current mode control • Ceramic output capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD) • Low component counts by internal phase compensation circuit NR885E eSOIC8 ■Outline Frequency Product IO NR885E Light load Normal load － 350kHz 3A VO (Recommended) 0.8V 0.8 ~ 14V 4.5 ~ 18V ■Pin Assignment (1) BS IN SW GND DCDC-SGE Protection Functions Ref. Voltage VIN Efficiency 95% OCP TSD Drooping Auto -restart ■Circuit (8) SS EN NC FB Feb.17,2016 (1) BS： Supply voltage for Gate drive (2) IN： Voltage Input (3) SW： Switching Output (4) GND： Ground (5) FB： Feedback Signal Input (6) NC：No Connection (7) EN： Vo ON/OFF Control (8) SS： Soft-start NR885E Back to Synchronous Switching P.58 IO=3A, VIN=20V Synchronous Buck Switching Regulator IC NR420A series Under Development eSOIC8 ■Outline Frequency Products IO NR421A Light load Normal load － 350kHz 3A Ref. Voltage VO 0.8V 0.8 ~ 14V ■Pin Assignment (1) SS BS SW GND DCDC-SGE ■ Features • IO = 3A • FSW =350kHz • Adjustable output voltage type • Synchronous rectification • Current mode control • Ceramic output capacitor can be used • Soft-start function • Output ON/OFF function • Protections (OCP, TSD, UVLO) • Low component counts by internal phase compensation circuit Protection Functions VIN (Recommended) 4.5 ~ 18V Efficiency 94% OCP TSD Drooping Auto -restart ■Circuit (8) NC FB EN IN Feb.17,2016 (1) SS： Soft-start (2) BS： Supply voltage for Gate drive (3) SW： Switching Output (4) GND： Ground (5) IN： Voltage Input (6) EN： Vo ON/OFF Control (7) FB： Feedback Signal Input (8) NC： No Connection NR421A Back to Synchronous Switching P.59 Buck Switching Regulator Modules Products Information Integrated Synchronous Buck Switching Regulator IC and peripheral components Easy for design (No requirement inductance setup) Reducing PCB size Buck Switching Regulator Modules Buck Switching Regulator IC DC/DC conv. IC Load Load MPM81 Easy for design DCDC-SGE Feb.17,2016 Buck to top page P.60 IO=0.5A, VIN=35V Non-synchronous Buck Switching Regulator Module ■ Features • Easy for design (Internal high-side and low-side switch, controller, inductor) • Requires only 2 discrete components(CIN, CO) • Dimensions 14.5mm(W) ×12mm(D) ×13.2mm(H) • Fixed output voltage: 5V • IO = 0.5A • fOSC = 60kHz • Protections (OCP, TSD, UVLO) SI-8401L ■Outline Frequency Product SI-8401L IO 0.5A Light load Normal load － 60kHz ■Pin Assignment Ref. Voltage VO － 5V±4% VIN (Recommended) 7 ~ 33V Protection Functions Efficiency 80% OCP TSD Drooping Auto -restart ■Circuit (1) VO：Output (2) GND：Ground (3) LIN：Inductor Output (4) VIN：Voltage Input No.1 Pin Marking DCDC-SGE Feb.17,2016 Back to Module Line up P.61 IO=1A, VIN=35V Non-synchronous Buck Switching Regulator Module ■ Features • Easy for design (Internal high-side and low-side switch, controller, inductor) • Requires only 2 discrete components(CIN, CO) • Dimensions 26mm(W) ×26mm(D) ×18mm(H) • Fixed output voltage: 5V • IO = 1A • fOSC = 60kHz • Soft-start function • Protections (OCP, TSD, UVLO) SI-8501L ■Outline Frequency Product SI-8501L IO 1A Light load Normal load － 60kHz ■Pin Assignment Ref. Voltage VO － 5V±4% VIN (Recommended) 7 ~ 33V Protection Functions Efficiency 80% OCP TSD Drooping Auto -restart ■Circuit (1) VO：Output (2) SS：Soft-start (3) GND：Ground (4) LIN：Inductor Output (5) Blank：None (6) VIN：Voltage Input No.1 Pin Marking DCDC-SGE Feb.17,2016 Back to Module Line up P.62 IO=1A, VIN=35V Non-synchronous Buck Switching Regulator Module ■ Features • Easy for design (Internal high-side and low-side switch, controller, inductor) • Requires only 2 discrete components • Dimensions 14mm(W) ×14mm(D) ×10mm(H) • Fixed output voltage: 5V / 3.3V • IO = 1A • fOSC = 350kHz • Soft-start function • Ceramic output capacitor can be used • Protections (OCP, TSD, UVLO) BR300 series NR110K is built in. ■Outline Products IO Frequency Light load Normal load Ref. Voltage BR300 VO VIN (Recommended) － 350kHz BR301 0.8V 8 ~ 30V 3.3V±3% ■Pin Assignment Protection Functions OCP TSD Drooping Auto -restart 91% 5.0V±3% 1A Efficiency 87% ■Circuit (1) (4) (1) Vo：Output (2) GND：Ground (3) NC：No Connection (4) VIN：Voltage Input BR300 ←Top View (2) DCDC-SGE (3) Feb.17,2016 Back to Module Line up P.63 IO=2A, VIN=35V Synchronous Buck Switching Regulator Module ■Features MPM80 series • Easy for design (Internal high-side and low-side switch, controller, inductor) • Requires discrete components • MPM80：4 components, MPM81/MPM82: 2 components • IO = 2A • fOSC=630kHz • Soft-start function • Protections (OCP, TSD, UVLO) TO-220F-8L ■Outline Frequency Products IO Light load Normal load MPM80 MPM81 2A － 630kHz MPM82 ■Pin Assignment (MPM80) (1) Cut pin DCDC-SGE VO 0.8V 3.0 ~ 16V － 3.30V － 5.00V Protection Functions VIN (Recommended) Efficiency OCP TSD Drooping Auto -restart 95% 8 ~ 30V 88% 93% ■Circuit (1) ｰ：Blank, Lead is being cut. (2) NC：No Connection (3) VIN：Voltage Input (4) P-GND：Power Ground (5) S-GND：Signal Ground (6) VO：Output (7) FB：Feedback Signal Input (2) Ref. Voltage (3) VIN (6) VO MPM80 (7) FB (4) P-GND (7) Feb.17,2016 (5) S-GND Back to Module Line up P.64 IO=3A, VIN=41V Synchronous Buck Switching Regulator Module ■ Features MPM00 series • Easy for design (Internal high-side and low-side switch, controller, inductor) • Requires only 3 discrete components • Adjustable output voltage type (MPM01: 1.8V to 12V / MPM04: 12V to 24V) • IOUT = 3A • fOSC = 250kHz ZIP9P • Soft-start function • Protections (OCP, TSD, UVLO) ■Outline Products Frequency IO Light load Normal load Ref. Voltage MPM01 3A － 250kHz 1.8 ~ 12V 9 ~ 40V Efficiency 91% 12 ~ 24V ■Pin Assignment DCDC-SGE (Recommended) 0.5V MPM04 (1) VIN VO 16 ~ 40V Protection Functions OCP TSD Drooping Auto -restart ■Circuit (9) (1) GND：Ground (2) VIN：Voltage Input (3) GND：Ground (4) FB：Feedback Signal Input (5) OUT：Output (6) OUT：Output (7) OUT：Output (8) SW：Switching Output(for measurement) (9) SW：Switching Output(for measurement) Feb.17,2016 MPM00 Back to Module Line up P.65 Linear Regulator (LDO) IC Products Information For low noise application Few external components Integrated power MOSFET or Bipolar transistor for series puss switch Low-drop out IC VO VIN CIN GND DCDC-SGE Feb.17,2016 CONT CO GND Buck to top page P.66 IO=1A, VIN=35V Linear Regulator IC ■ Features • IO = 1A • VDIF (=VIN - VO) ≤ 0.5V (IO = 1A) • Adjustable output voltage type • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SI-3010KF TO-220F-5L ■Outline IO SI-3010KF 1A Ref. Voltage VO 0.5V 1.0V 1.1 ~ 16V ■Pin Assignment DCDC-SGE VIN (Maximum rating) (Recommended) 35V 2.4 ~ 27V COUT Ceramic capacitor － Protection Functions OCP TSD Fold Back Auto -restart ■Circuit (1) VC：Vo ON/OFF Control (2) VIN：Voltage Input (3) GND：Ground (4) VO：Output (5) ADJ：Feedback Signal Input (1) VIN SI-3010KF Load Product VDIF (IO ≤ 1A) (5) Feb.17,2016 Back to LDO P.67 IO=3A, VIN=10V Linear Regulator IC ■ Features • IO = 3A • VDIF (=VIN - VO) ≤ 0.5V (IO = 3A) • Adjustable output voltage type • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SI-3011ZF TO-220F-5L ■Outline IO SI-3011ZF 3A Ref. Voltage VO 0.7V 1.1V 1.2 ~ 5V ■Pin Assignment DCDC-SGE VIN (Maximum rating) (Recommended) 10V ~ 6V COUT Ceramic capacitor － Protection Functions OCP TSD Fold Back Auto -restart ■Circuit (1) VC：Vo ON/OFF Control (2) VIN：Voltage Input (3) GND：Ground (4) VO：Output (5) ADJ： Feedback Signal Input (1) VIN SI-3011ZF Load Product VDIF (IO ≤ 1A) (5) Feb.17,2016 Back to LDO P.68 IO=250mA, VIN=18V Linear Regulator IC ■ Features • IO = 250mA • VDIF (=VIN - VO) ≤ 0.5V (IO = 250mA) • Adjustable output voltage type • Ceramic output capacitor can be used • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SI-3012LU SOT-89-5L ■Outline SI-3012LU IO 0.25A Ref. Voltage VO 0.5V 1.25V 1.5 ~ 15V ■Pin Assignment (5) VIN VIN (Maximum rating) (Recommended) 18V 2.4V ≤ Vo+2V COUT Ceramic capacitor ○ Protection Functions OCP TSD Fold Back Auto -restart ■Circuit (4) (1) ADJ： Feedback Signal Input (2) GND：Ground (3) VC：Vo ON/OFF Control (4) VIN：Voltage Input (5) VO：Output SI-3012LU Load Product VDIF (IO ≤ 1A) (1) (2) (3) DCDC-SGE Feb.17,2016 Back to LDO P.69 IO=1A, VIN=17V Linear Regulator IC ■ Features • IO = 1A • VDIF (=VIN - VO) ≤ 0.6V (IO = 1A) • Ceramic output capacitor can be used • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SI-3000KS series SOP8 ■Outline IO SI-3025KS SI-3033KS 1A 0.6V SI-3012KS Ref. Voltage － 1.28V VO 3.30V VC VIN Vo Sense (ADJ) DCDC-SGE VIN (Maximum rating) (Recommended) 2.50V 17V 1.5 ~ 5V ■Pin Assignment (1) VIN ~ Vo+1V COUT Ceramic capacitor ○ Protection Functions OCP TSD Drooping Auto -restart 2.4 ≤ Vo+1V ■Circuit (8) GND GND GND GND Feb.17,2016 (1) VC： Vo ON/OFF Control (2) VIN：Voltage Input (3) VO：Output (4) Sense(ADJ)：Detection of Output Voltage ( or Feedback Signal Input) (5) GND：Ground (6) GND：Ground (7) GND：Ground (8) GND：Ground SI-3012KS Load Products VDIF (IO ≤ 1A) Back to LDO P.70 IO=1A, VIN=17V Linear Regulator IC ■ Features • IO = 1A • VDIF (=VIN - VO) ≤ 0.6V (IO = 1A) • Ceramic output capacitor can be used • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SI-3000KM series Vol.1 TO-252-5L ■Outline IO SI-3025KM SI-3033KM Ref. Voltage － 1A 1.28V DCDC-SGE Protection Functions OCP TSD ○ Drooping Auto -restart 2.4 ≤ Vo+1V ■Circuit (1) VC：Vo ON/OFF Control (2) VIN：Voltage Input (3) GND：Ground (4) VO：Output (5) Sense(ADJ)：Detection of Output Voltage ( or Feedback Signal Input) (1) COUT Ceramic capacitor ~ Vo+1V 17V 1.5 ~ 5V ■Pin Assignment VIN (Maximum rating) (Recommended) 2.50V 3.30V 0.6V SI-3012KM VO VIN SI-3012KM Load Products VDIF (IO ≤ 1A) (5) Feb.17,2016 Back to LDO P.71 IO=1A, VIN=35V Linear Regulator IC ■ Features • IO = 1A • VDIF (=VIN - VO) ≤ 0.6V (IO = 1A) • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SI-3000KM series Vol.2 TO-252-5L ■Outline VDIF (IO ≤ 1A) IO Ref. Voltage SI-3050KM SI-3090KM SI-3120KM VO 1A 0.6V － 9.00V 12.00V 1.1V (Maximum rating) (Recommended) 35V 1.1 ~ 16V ■Pin Assignment COUT Ceramic capacitor Protection Functions OCP TSD ~ 15V － Fold Back Auto -restart 2.4 ~ 27V ■Circuit (1) VC：Vo ON/OFF Control (2) VIN：Voltage Input (3) GND：Ground (4) VO：Output (5) Sense(ADJ)：Detection of Output Voltage ( or Feedback Signal Input) DCDC-SGE VIN 5.00V SI-3010KM (1) VIN SI-3010KM Load Products (5) Feb.17,2016 Back to LDO P.72 IO=1A, VIN=17V Linear Regulator IC ■ Features • IO = 1A • VDIF (=VIN - VO) ≤ 0.6V (IO = 1A) • Ceramic output capacitor can be used • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SI-3000KD series Vol.1 TO-263-5L ■Outline VDIF (IO ≤ 1A) IO SI-3033KD 1A Ref. Voltage VO － 3.30V 0.6V SI-3012KD 1.28V (Maximum rating) (Recommended) COUT Ceramic capacitor Protection Functions OCP TSD Drooping Auto -restart ~ Vo+1V 1.5 ~ 5V ○ 2.4 ≤ Vo+1V ■Circuit (1) VC：Vo ON/OFF Control (2) VIN：Voltage Input (3) GND：Ground (4) Vo：Output (5) Sense(ADJ)：Detection of Output Voltage ( or Feedback Signal Input) DCDC-SGE VIN 17V ■Pin Assignment (1) VIN SI-3012KD Load Products (5) Feb.17,2016 Back to LDO P.73 IO=1A, VIN=35V Linear Regulator IC ■ Features • IOUT = 1A • VDIF (= VIN - VO) ≤ 0.6V (IO = 1A) • Protections (OCP, TSD) • Output ON/OFF function (Iq(OFF) ≤ 1µA) SI-3000KD series Vol.2 TO-263-5L ■Outline IO SI-3050KD 1A Ref. Voltage VO － 5.00V 0.6V SI-3010KD 1.0V (Maximum rating) (Recommended) COUT Ceramic capacitor Protection Functions OCP TSD Fold Back Auto -restart ~ 15V 1.1 ~ 16V － 2.4 ~ 27V ■Circuit (1) VC：Vo ON/OFF Control (2) VIN：Voltage Input (3) GND：Ground (4) Vo：Output (5) Sense(ADJ)：Detection of Output Voltage ( or Feedback Signal Input) DCDC-SGE VIN 35V ■Pin Assignment (1) VIN SI-3010KD Load Products VDIF (IO ≤ 1A) (5) Feb.17,2016 Back to LDO P.74 IO=1A, VIN=30V Linear Regulator IC ■ Features • IO = 1A • VDIF (= VIN - VO) ≤ 0.6V (IO = 1A) • Adjustable output voltage type • Ceramic output capacitor can be used • Output ON/OFF function • Protections (OCP, TSD, UVLO) NR301E eSOIC8 ■Outline Product IO NR301E VDIF (IO ≤ 1A) Ref. Voltage VO 0.6V 1.0V 2.5 ~ 15V 1A ■Pin Assignment (1) Vo ADJ GND NC DCDC-SGE VIN VIN (Maximum rating) (Recommended) 30V ~ 27V COUT Ceramic capacitor ○ Protection Functions OCP TSD Fold Back Auto -restart ■Circuit (8) Vin NC NC Vc Feb.17,2016 (1) VO：Output (2) ADJ： Feedback Signal Input (3) GND：Ground (4) NC：No Connection (5) VC：Vo ON/OFF Control (6) NC： No Connection (7) NC： No Connection (8) Vin：Voltage Input NR301E Back to LDO P.75 IO=3A, VIN=10V Linear Regulator IC ■ Features • IO = 3A • VDIF (= VIN - VO) ≤ 0.6V (IO = 3A) • Output ON/OFF function (Iq(OFF) ≤ 1µA) • Protections (OCP, TSD) SI-3000ZD series TO-263-5L ■Outline IO VDIF (IO ≤ 1A) 3A 0.6V SI-3033ZD SI-3011ZD Ref. Voltage VO － 3.30V 1.1V OCP TSD Drooping Auto -restart ~ 6V 1.2 ~ 5V － 2.4 ~ 6V ■Circuit (1) VC：Vo ON/OFF Control (2) VIN：Voltage Input (3) GND：Ground (4) Vo：Output (5) Sense(ADJ)：Detection of Output Voltage ( or Feedback Signal Input) DCDC-SGE VIN 10V ■Pin Assignment (1) VIN (Maximum rating) (Recommended) Protection Functions SI-3011ZD Load Products COUT Ceramic capacitor (5) Feb.17,2016 Back to LDO P.76 Package Information Package Package Outline DIP8 Package Package Outline ZIP9 SOIC8 P.78 eSOIC8 BR300 SI-8401L TO-252-5L SI-8501L HSOP16 HSOP8 QFN20 SOP8 TO-263-5L P.79 P.81 P.82 SOT-89-5L TO-220F-5L TO-220F-7L TO-220F-8L P.80 ZIP10 DCDC-SGE Feb.17,2016 Buck to top page P.77 Package Outline 1/5 DCDC-SGE Feb.17,2016 DIP8 SOIC8 eSOIC8 TO-252-5L Back to top of Package Information P.78 Package Outline 2/5 HSOP16 TO-263-5L DCDC-SGE Feb.17,2016 QFN20 SOT-89-5L Back to top of Package Information P.79 Package Outline 3/5 TO-220F-5L TO-220F-7L ZIP10 TO-220F-8L DCDC-SGE Feb.17,2016 Back to top of Package Information P.80 Package Outline 4/5 BR300 ZIP9 SI-8501L SI-8401L Open-air type Weight:5.1g DCDC-SGE Feb.17,2016 Open-air type Weight:14.5g Back to top of Package Information P.81 Package Outline 5/5 SOP8 HSOP8 DCDC-SGE Feb.17,2016 Back to top of Package Information P.82 Freewheel Diodes For Buck Switching Regulator ICs Freewheel Diode L IC VIN CIN GND DCDC-SGE VO HSW Feb.17,2016 CONT D COUT GND Buck to top page P.83 Freewheel Diodes 1/2 VRM IF(AV) 1A 2A 40V 3A 5A 10A DCDC-SGE Feb.17,2016 Products Mounting Type Package AK04 Through hole φ0.57/φ2.4×2.9L EK04 Through hole φ0.6/φ2.7×5.0L SJPB-D4 Surface 4.5×2.6 EK14 Through hole φ0.78/φ2.7×5.0L RK14 Through hole φ0.78/φ4.0×7.2L SJPB-H4 Surface 4.5×2.6 RK34 Through hole φ0.98/φ4.0×7.2L RK44 Through hole φ1.4/φ6.5×8.0L SJPB-L4 Surface 4.5×2.6 RW54 Through hole φ1.4/φ6.5×8.0L SJPW-T4 Surface 4.5×2.6 FMB-G14L Through hole TO-220F-2L FMB-G24H Through hole TO-220F-2L Buck to top page P.84 Freewheel Diodes 2/2 VRM IF(AV) Products Mounting Type Package AK06 Through hole φ0.57/φ2.4×2.9L EK06 Through hole φ0.6/φ2.7×5.0L SJPB-D6 Surface 4.5×2.6 EK16 Through hole φ0.78/φ2.7×5.0L RK16 Through hole φ0.78/φ4.0×7.2L SJPB-H6 Surface 4.5×2.6 RK36 Through hole φ0.98/φ4.0×7.2L SJPB-L6 Surface 4.5×2.6 3.5A RK46 Through hole φ1.4/φ6.5×8.0L 5A FMB-G16L Through hole TO-220F-2L 1A 2A 60V 3A DCDC-SGE Feb.17,2016 Buck to top page P.85 IMPORTANT NOTES The contents in this document are subject to changes, for improvement and other purposes, without notice. Make sure that this is the latest revision of the document before use. Application examples, operation examples and recommended examples described in this document are quoted for the sole purpose of reference for the use of the products herein and Sanken can assume no responsibility for any infringement of industrial property rights, intellectual property rights, life, body, property or any other rights of Sanken or any third party which may result from its use. Unless otherwise agreed in writing by Sanken, Sanken makes no warranties of any kind, whether express or implied, as to the products, including product merchantability, and fitness for a particular purpose and special environment, and the information, including its accuracy, usefulness, and reliability, included in this document. Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products at a certain rate is inevitable. Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems against any possible injury, death, fires or damages to the society due to device failure or malfunction. Sanken products listed in this document are designed and intended for the use as components in general purpose electronic equipment or apparatus (home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). When considering the use of Sanken products in the applications where higher reliability is required (transportation equipment and its control systems, traffic signal control systems or equipment, fire/crime alarm systems, various safety devices, etc.), and whenever long life expectancy is required even in general purpose electronic equipment or apparatus, please contact your nearest Sanken sales representative to discuss, prior to the use of the products herein. The use of Sanken products without the written consent of Sanken in the applications where extremely high reliability is required (aerospace equipment, nuclear power control systems, life support systems, etc.) is strictly prohibited. When using the products specified herein by either (i) combining other products or materials therewith or (ii) physically, chemically or otherwise processing or treating the products, please duly consider all possible risks that may result from all such uses in advance and proceed therewith at your own responsibility. Anti radioactive ray design is not considered for the products listed herein. Sanken assumes no responsibility for any troubles, such as dropping products caused during transportation out of Sanken’s distribution network. The contents in this document must not be transcribed or copied without Sanken’s written consent. DCDC-SGE Feb.17,2016 P.86