1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL CONTACT MATERIAL: COPPER ALLOYS CONTACT TYPE: STAMPED CONTACT PLATING: SELECTIVE GOLD QUALITY CLASS: 50 MATING CYCLES 7.62±0.08 0.00 0.00 1.50 R0.25 ENVIRONMENTAL OPERATING TEMPERATURE: -40 UP TO 85°C FLAMABILITY RATING: UL94-V0 COMPLIANCE: LEAD FREE AND ROHS 0.80 3.00 30.00 4.09 4.27 R0.25 A 0.30 B B 7.71 8.23 0.64 8.33 ELECTRICAL CURRENT RATING: 3 A MAX WORKING VOLTAGE: 250 VAC CONTACT RESISTANCE: 50 mOHM MAX A 1.500 1.66±0.15 5.41 5.93 PACKAGING X = 0: 5 KPCS REEL X = 1: 500 PCS REEL 8.97 Ø1.50 10.63 B DIMENSION R0.200 14.6±0.3 Ø2.15±0.1 A A C 30.50° 21.97° AWG 24-26 A B C D R1 R2 2.14 2.26 1.75 1.54 0.90 0.75 D B 8.24 AWG 17.12 R1 0.35 18.87 R2 A-A B-B R1.00 Ø 1.00 C RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 J APPROVAL: JTs I UNIT: MM DESCRIPTION: D SUB MALE CRIMP CONTACT SIZE WERI PART NO: 618 x05 137 22 A4 SCALE: H 19-JAN-16 TPK AK SHEET: 1/3 REV DATE FILE BY DRAW: JOE D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JTs B DESCRIPTION: D SUB MALE CRIMP CONTACT SIZE WERI PART NO: 618 x05 137 22 A4 SCALE: A REV UNIT: MM SHEET: 2/3 DATE FILE BY DRAW: AK D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D