TLWR8900, TLWR8901, TLWR8902, TLWR8903, TLWY8900 www.vishay.com Vishay Semiconductors TELUX LED FEATURES 19232 DESCRIPTION The TELUX series is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed AllnGaP technology. The supreme heat dissipation of TELUX allows applications at high ambient temperatures. All packing units are binned for luminous flux, forward voltage, and color to achieve the most homogenous light appearance in application. SAE and ECE color requirements for automobile application are available for color red. PRODUCT GROUP AND PACKAGE DATA • • • • • High luminous flux • Supreme heat dissipation: RthJP is 90 K/W • High operating temperature: Tamb = -40 °C to +110 °C • Meets SAE and ECE color requirements for the automobile industry for color red • Packed in tubes for automatic insertion • Luminous flux, forward voltage, and color categorized for each tube • Small mechanical tolerances allow precise usage of external reflectors or lightguides • Compatible with wave solder processes according to CECC 00802 • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • Product group: LED Package: TELUX Product series: power Angle of half intensity: ± 45° Exterior lighting Dashboard illumination Tail-, stop-, and turn signals of motor vehicles Replaces small incandescent lamps Traffic signals and signs PARTS TABLE PART COLOR TLWR8900 TLWR8901 TLWR8902 TLWR8903 TLWY8900 Red Red Red Red Yellow LUMINOUS FLUX at IF (mlm) (mA) MIN. TYP. MAX. 2000 3700 70 2000 3700 4800 70 3000 3900 4800 70 2500 3500 4200 70 2000 3200 70 WAVELENGTH at IF (nm) (mA) MIN. TYP. MAX. 611 616 634 70 611 616 634 70 611 616 634 70 611 616 634 70 585 591 597 70 FORWARD VOLTAGE (V) MIN. TYP. MAX. 1.83 2.2 2.67 1.83 2.2 2.67 1.95 2.2 2.67 1.83 2.2 2.67 1.83 2.1 2.67 at IF (mA) TECHNOLOGY 70 70 70 70 70 AlInGaP on GaAs AlInGaP on GaAs AlInGaP on GaAs AlInGaP on GaAs AlInGaP on GaAs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLWR8900, TLWR8901, TLWR8902, TLWR8903, TLWY8900 PARAMETER Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction / ambient Thermal resistance junction / pin TEST CONDITION IR = 100 μA Tamb ≤ 85 °C tp ≤ 10 μs t ≤ 5 s, 1.5 mm from body preheat temperature 100 °C / 30 s With cathode heatsink of 70 mm2 SYMBOL VR IF IFSM PV Tj Tamb Tstg VALUE 10 70 1 187 125 -40 to +110 -55 to +110 UNIT V mA A mW °C °C °C Tsd 260 °C RthJA RthJP 200 90 K/W K/W Note (1) Driving the LED in reverse direction is suitable for a short term application Document Number: 83212 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.4, 07-Oct-15 TLWR8900, TLWR8901, TLWR8902, TLWR8903, TLWY8900 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLWR8900, TLWR8901, TLWR8902, TLWR8903, RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 70 mA, RthJA = 200 K/W TLWR8900 φV 2000 3700 - mlm IF = 70 mA, RthJA = 200 K/W TLWR8901 φV 2000 3700 4800 mlm IF = 70 mA, RthJA = 200 K/W TLWR8902 φV 3000 3900 4800 mlm IF = 70 mA, RthJA = 200 K/W TLWR8903 φV 2500 3500 4200 mlm IV/φV - 0.7 - mcd/mlm Dominant wavelength λd 611 616 634 nm Peak wavelength λp - 624 - nm Total flux Luminous intensity/total flux Angle of half intensity Total included angle 90 % of total flux captured Forward voltage Reverse voltage Junction capacitance UNIT ϕ - ± 45 - deg ϕ0.9 V - 100 - deg IF = 70 mA, RthJA = 200 K/W TLWR8900 VF 1.83 2.2 2.67 V IF = 70 mA, RthJA = 200 K/W TLWR8901 VF 1.83 2.2 2.67 V IF = 70 mA, RthJA = 200 K/W TLWR8902 VF 1.95 2.2 2.67 V IF = 70 mA, RthJA = 200 K/W TLWR8903 VF 1.83 2.2 2.67 V IR = 10 μA VR 10 20 - V VR = 0 V, f = 1 MHz Cj - 17 - pF OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLWY8900, YELLOW PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. Total flux IF = 70 mA, RthJA = 200 K/W φV 2000 3200 - UNIT mlm Luminous intensity/total flux IF = 70 mA, RthJA = 200 K/W IV/φV - 0.7 - mcd/mlm Dominant wavelength IF = 70 mA, RthJA = 200 K/W λd 585 591 597 nm Peak wavelength IF = 70 mA, RthJA = 200 K/W λp - 594 - nm Angle of half intensity IF = 70 mA, RthJA = 200 K/W ϕ - ± 45 - deg Total included angle 90 % of total flux captured ϕ0.9 V - 100 - deg V Forward voltage IF = 70 mA, RthJA = 200 K/W VF 1.83 2.1 2.67 Reverse voltage IR = 10 μA VR 10 15 - V VR = 0 V, f = 1 MHz Cj - 17 - pF Junction capacitance LUMINOUS FLUX CLASSIFICATION GROUP LUMINOUS FLUX (mlm) MIN. MAX. D 2000 3000 E 2500 3600 F 3000 4200 G 3500 4800 H 4000 6100 I 5000 7300 K 6000 9700 L 7000 12 200 Note • Luminous flux is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. These type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each tube (there will be no mixing of two groups on each tube). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one tube. In order to ensure availability, single wavelength groups will not be orderable. Document Number: 83212 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.4, 07-Oct-15 TLWR8900, TLWR8901, TLWR8902, TLWR8903, TLWY8900 www.vishay.com Vishay Semiconductors COLOR CLASSIFICATION FORWARD VOLTAGE CLASSIFICATION DOM. WAVELENGTH (nm) GROUP YELLOW MIN. FORWARD VOLTAGE (V) GROUP RED MAX. MIN. MAX. Y 1.83 2.07 Z 1.95 2.19 MIN. MAX. 0 585 588 1 587 591 611 618 0 2.07 2.31 2 589 594 614 622 1 2.19 2.43 3 592 597 616 634 2 2.31 2.55 3 2.43 2.67 Note • Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 10° 20° IV rel. - Relative Luminous Intensity IF - Forward Current (mA) red, yellow 80 60 40 RthJA = 200 K/W 20 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement 30° 100 80° 0 20 40 60 80 100 IF - Forward Current (mA) red, yellow tp/T = 0.01 Tamb ≤ 85 °C 0.02 0.05 0.1 100 1 1 0.01 18020 0.2 0 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement 1.2 10 000 10 0.4 16200 Fig. 1 - Forward Current vs. Ambient Temperature 1000 0.6 120 Tamb - Ambient Temperature (°C) 0.2 0.5 0.1 1 10 tp - Pulse Length (ms) Fig. 2 - Forward Current vs. Pulse Length 100 Irel. - Relative Luminous Intensity 0 18019 red 1.0 0.8 0.6 0.4 0.2 0.0 570 16007 590 610 630 650 670 λ- Wavelength (nm) Fig. 4 - Relative Intensity vs. Wavelength Document Number: 83212 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.4, 07-Oct-15 TLWR8900, TLWR8901, TLWR8902, TLWR8903, TLWY8900 www.vishay.com Vishay Semiconductors 10 IV rel - Relative Luminous Intensity IV rel. - Relative Luminous Intensity 1.2 yellow 1.0 0.8 0.6 0.4 0.2 0 red 1 0.1 0.01 540 560 580 600 620 640 λ - Wavelength (nm) 16008 1 Fig. 5 - Relative Intensity vs. Wavelength 10 I F - Forward Current (mA) yellow IV rel - Relative Luminous Intensity 90 red 70 60 50 40 30 20 10 20176 100 Fig. 8 - Relative Luminous Flux vs. Forward Current 100 80 10 IF - Forward Current (mA) 15978 0 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 V F - Forward Voltage (V) Fig. 6 - Forward Current vs. Forward Voltage 1 0.1 0.01 1 10 IF - Forward Current (mA) 15979 100 Fig. 9 - Relative Luminous Flux vs. Forward Current 100 yellow I Spec - Specific Luminous Flux IF - Forward Current (mA) 90 80 70 60 50 40 30 20 10 0 1.4 15975 red 1.0 0.1 1.6 1.8 2.0 2.2 VF - Forward Voltage (V) 1 2.4 Fig. 7 - Forward Current vs. Forward Voltage 18022 10 100 IF - Forward Current (mA) Fig. 10 - Specific Luminous Flux vs. Forward Current Document Number: 83212 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.4, 07-Oct-15 TLWR8900, TLWR8901, TLWR8902, TLWR8903, TLWY8900 www.vishay.com Vishay Semiconductors 1.0 210 200 190 180 170 0.1 1 10 160 100 I F - Forward Current (mA) 15981 0 50 16009 Fig. 11 - Specific Luminous Flux vs. Forward Current 100 150 200 Cathode Padsize 250 300 (mm2) Fig. 14 - Thermal Resistance Junction Ambient vs. Cathode Padsize 1.8 100 1.6 90 IF = 70 mA red 1.4 % Total Luminous Flux Φ V rel - Relative Luminous Flux Padsize 8 mm2 per anode pin 220 RthJA (K/W) I Spec - Specific Luminous Flux 230 yellow 1.2 1.0 0.8 0.6 0.4 0.2 80 70 60 50 40 30 20 10 0.0 - 40 - 20 0 20 40 60 80 100 18021 Tamb - Ambient Temperature (°C) Fig. 12 - Relative Luminous Flux vs. Ambient Temperature 0 0 16201 25 50 75 100 125 Total Included Angle (Degrees) Fig. 15 - Percentage Total Luminous Flux vs. Total Included Angle for 90° Emission Angle Φ V rel - Relative Luminous Flux 2.0 yellow 1.8 IF = 70 mA 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 - 40 - 20 15977 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 13 - Relative Luminous Flux vs. Ambient Temperature Document Number: 83212 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.4, 07-Oct-15 TLWR8900, TLWR8901, TLWR8902, TLWR8903, TLWY8900 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C Cathode marking technical drawings according to DIN specifications Area not plane 5° 1.35 ± 0.1 SR1.65 A 0.6 max. 2.65 ± 0.3 4.65 ± 0.3 7.75 ± 0.3 1.45 1.6 1.32 0.76 ± 0.1 0.4 ± 0.1 5.08 ± 0.3 1.55 ± 0.2 7.62 ± 0.3 6.55 5.08 ± 0.2 7.62 ± 0.3 Drawing-No.: 6.544-5321.01-4 Issue: 5; 25.07.14 Document Number: 83212 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.4, 07-Oct-15 TLWR8900, TLWR8901, TLWR8902, TLWR8903, TLWY8900 www.vishay.com Vishay Semiconductors FAN FOLD BOX DIMENSIONS in millimeters Label 600 45 16491 110 Label LABEL OF FAN FOLD BOX (example) A. Type of component 106 B. Manufacturing plant A C. SEL - selection code (bin): e.g.: A = code for luminous intensity group 4 = code for color group H VISHAY 37 D. Date code year / week A E. Day code (e.g. 4: Thursday, A: early shift) F. Batch: no. B C D E F 20228 G G. Total quantity H. Company code EXAMPLE FOR TELUX TUBE LABEL DIMENSIONS in millimeters 90 52 A TLWR7600 PTC27 B C SELB10 D DC20000121 BN12345 E F PCS70 MNO G H 8 16490 A. Bar code B. Type of component C. Manufacturing plant D. SEL - selection code (bin): digit 1 - code for luminous flux group digit 2 - code for dominant wavelength group digit 3 - code for forward voltage group E. Date code F. Batch: no. G. Total quantity H. Company code Document Number: 83212 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.4, 07-Oct-15 TLWR8900, TLWR8901, TLWR8902, TLWR8903, TLWY8900 www.vishay.com Vishay Semiconductors TUBE WITH BAR CODE LABEL DIMENSIONS in millimeters Drawing-No.: 9.700-5223.0-4 Rev. 2; Date: 23.08.99 20438 Drawing Proportions not Scaled Document Number: 83212 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.4, 07-Oct-15 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000