ALD120

ALD120
1 2 0 W, S i n g l e O u tput, 2 Channel, Class 2 LED Drivers
series
Single Outputs
Universal Input
8VDC to 48VDC Outputs
Short Circuit Protection
Full Safety Approvals for Class 2, Outdoor
Wet Locations and LED Lighting
Model Number I/P Voltage
O/P Amps
O/P Voltage Chan1/Chan2
Combined Current max. O/P Watts max.
Ripple/Noise max.
ALD120-208VFC
ALD120-210VFC
ALD120-212VFC
ALD120-215VFC
ALD120-218VFC
ALD120-221VFC
ALD120-224VFC
ALD120-227VFC
ALD120-236VFC
ALD120-248VFC
8 VDC
10 VDC
12 VDC
15 VDC
18 VDC
21 VDC
24 VDC
27 VDC
36 VDC
48 VDC
10A
10A
10A
8A
6.67A
5.7A
5.0A
4.44A
3.33A
2.5A
90-264 VAC
90-264 VAC 90-264 VAC
90-264 VAC
90-264 VAC
90-264 VAC
90-264 VAC
90-264 VAC
90-264 VAC
90-264 VAC
5 / 5
5 / 5
5 / 5
5 / 5
5 / 5
4.57 / 4.57
4.0 / 4.0
3.55 / 3.55
2.66 / 2.66
2.0 / 2.0
80W
100W
120W
120W
120W
120W
120W
120W
120W
120W
80mV
100mV
120mV
150mV
180mV
210mV
240mV
270mV
360mV
480mV
*Note: All noise measurements made at the output terminals, connected to a 20MHz low pass filter
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
ASTRODYNE EUROPE: 353 51 561060
1 2 0 W, S i n g l e O u tput, 2 Channel, Class 2 LED Drivers
INPUT SPECIFICATIONS
Input Voltage ALD120
Max. Iin
Input Frequency
Max. Inrush Current
Power Factor
ALD120
series
ENVIRONMENTAL SPECIFICATIONS
90-264 VAC (120/240 VAC Nominal)
1.6A @ 100 VAC Input
47-63Hz
30A @ 230VAC Input
25°C, cold start-up
99%, typ.
MTBF
Cooling
Operating Temp.
Storage Temperature
Relative Humidity
55K Hrs, FL @ 25°C ambient,
Based on MIL-217F
Convection
-20°C to +60°C FL
-40°C to +85°C
5% to 95%
OUTPUT SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Output Voltage/Current
See Model Chart
Output Voltage Adjust
+10/-25%
Max. Output Power
See Model Chart
Ripple / Noise
See Model Chart
Efficiency
80% min. @ FL, 230 VAC Input
Hold Up Time
16mS @ FL, 100 VAC Input
Start Up Time
1 Second, typ.
Transient Response
4mS, FL to 1/2L, 100 VAC Input
Line Regulation
±1% max.
Voltage Mode Load Regulation ±5% max., (Voltage setting Adjust-
able via on board pot +5/-25%)
Over Current Protection
105% Max per channel (Hiccup-
mode, Auto-Recovery upon removal of over current condition.*
Constant Current Mode Regulation
±3% max., (Current setting Adjust-
able via on board pot +5/-90%)
Over Voltage Protection
132% max. *
Short Circuit Protection
Hiccup Mode, Auto Recovery upon removal of over current condition. *
Case / Design / Material
Mounting and Connection
Size
Weight
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
NEMA 3 Design / Aluminum /
Potted with AC and DC Wiring
Compartments
Flange Mount, AC/DC Conduit Entries, Knockouts for 1/2”
Conduit and Fittings
11”L x 3.37”W x 2.19”H
3.6 lb (1633g)
Compliance / Safety
EMI / RFI
Safety Standards
Weatherability Standard
CISPR-22B, FCC-15B EMC
EN61000-3-2 (EMC)
UL/CUL 1310/1585, Class 2,
Outdoor Wet Locations
for UL 48 LED Lighting, CE
EN60529 - Weatherability of an Enclosure - Rated to IP65
Astrodyne products are not authorized or warranteed for use
as critical components in life support systems, equipment used
in hazardous environments, nuclear controls systems, or other
mission-critical applications.
All specifications are typical at nominal input, full load, and 25DegC unless
otherwise noted
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
ASTRODYNE EUROPE: 353 51 561060
1 2 0 W, S i n g l e O u tput, 2 Channel, Class 2 LED Drivers
ALD120
series
MECHANICAL DIMENSIONS
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
ASTRODYNE EUROPE: 353 51 561060
Similar pages