1.305" SMA Housing Body Sleeve 1.305 (33.15) A 0.027 (0.69) 0.027 (0.69) 0.033 (0.84) Side View 1 0.425 ±0.001 (10.80 ±0.02) 1 0.165 (4.19) 0.275 (6.98) 2 0.165 (4.19) 0.608 ±0.001 (15.44 ±0.02) A 2 0.050 (1.27) Top View 0.378 ±0.001 (9.60 ±0.02) 1 0.373 (9.47) 0.373 (9.47) A Bottom View 0.353 (8.97) 1 SMA Male SMA Female A Tooling Dimple, 2 Locations, Diameter 0.055 in (1.40 mm), Depth 0.055 in (1.40 mm) Provides a cavity for dimpling the sleeve with a center punch. The mechanical contact also provides an electrical contact and shields the internal circuitry in the body. No. 1 2 Description Body Center Pin Qty 1 2 Material Brass Brass Plating Nickel Gold SMA-KIT-1.3MF CRYSTEK CORPORATION Rev. B 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com