CCSO 014 1090

CCSO-014-1090
SAW Clock Oscillator
CCSO-014-1090 Model
14 Pin DIP, 12V, True Sinewave
Model CCSO-014-1090 is a 1.090 GHz SAW (surface acoustic wave) Clock
Oscillator (CCSO). SAW crystal technology provides low-noise and low-jitter
performance with true sinewave output. Features include -138 dBc/Hz phase
noise at 10kHz offset, +12V input voltage, -55°C to +105°C operating
temperature, 14 PIN DIP hermetic sealed package. The oscillator has no
sub-harmonic and the second harmonic is -35dBc Max.
Rev: M
Date: 18-Sep-2015
Page 1 of 2
CRYSTEK
CORPORATION
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com
CCSO-014-1090
SAW Clock Oscillator
CCSO-014-1090 Model
14 Pin DIP, 12V, True Sinewave
Frequency:
Temperature Range:
Optional*:
Storage:
Input Voltage:
Supply Ripple:
Freq. vs Temp.:
Input Current:
Output:
Output Power:
Start-up time:
2nd Harmonic:
Sub-harmonics:
Load:
Jitter:
SONET OC-48(12kHz~80MHz)
SONET OC-192(50kHz~80MHz)
Phase Noise Typical:
1kHz
-110 dBc/Hz
10kHz
-138 dBc/Hz
100kHz
-150 dBc/Hz
1MHz
-160 dBc/Hz
G-sensitivity:
1.090 GHz
-55°C to 105°C
-40°C to 85°C
-55°C to 110°C
12.0V ±0.25V
150mV p-p Max
±250ppm Max
30mA Typical, 40mA Max
True SineWave
+12dBm ±2dBm
2ms Typical, 10ms Max
-40dBc Typical, -35dBc Max
None
50 Ω
0.820
(20.83)
0.750
(19.05)
0.520
(13.21)
0.450
(11.43)
0.18ps RMS Typical, 0.20ps RMS Max
0.12ps RMS Typical, 0.15ps RMS Max
CRYSTEK
CCSO-014-1090
1090MHz
Date Code
0.200
(5.08)
0.236
(6.00)
0.600
(15.24)
0.9×10-9 per g
PIN
Connection
1
7
8
14
N/C
GND
Output
Vdd
1
7
14
8
0.300
(7.62)
*Option: CCSO-014X-1090 -40°C to +85°C Version
Parameter
Conditions
Available Frequencies
Mechanical Shock
MIL-STD-202, Method 213, Condition A
Mechanical Vibration
MIL-STD-202, Method 204, Condition A
Solderability
MIL-STD-202, Method 208
Solvent Resistance
MIL-STD-202, Method 215
Resistance to Soldering Heat
MIL-STD-202, Method 210, Condition C
Thermal Shock
MIL-STD-202, Method 107, Condition A
Moisture Resistance
MIL-STD-202, Method 106, 90% to 98% RH 10 Days
Terminal Strength
MIL-STD-202, Method 211, Condition A
Hermetic Seal
MIL-STD-202, Method 112, Procedure III, Condition C
Humidity
MIL-STD-202, Method 103
High Temperature Life (Operating)
MIL-STD-202, Method 108, Condition D, 1,000 hrs at +70°C
Acceleration
MIL-STD-202, Method 212, Condition A
Parameter
Conditions
100% Temperature Testing
-55/105°C
100% Start-Up Testing
-55°C and +85°C
CRYSTEK
CORPORATION
1030 MHz
1090 MHz
Rev: M
Date: 18-Sep-2015
Page 2 of 2
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
Fax: 239-561-1025 • www.crystek.com
Similar pages