1 2 3 4 5 MATERIAL: HOUSING MATERIAL: PPS COLOR: BEIGE ACTUATOR MATERIAL: PPS COLOR: BLACK CONTACT MATERIAL: PHOSPOR BRONZE CONTACT PLATING: 100µ’’ TIN OVER 50µ’’ NI QUALITY CLASS: 25 MATING CYCLES* 8 APPLICABLE FFC LAYOUT (THICKNESS: 0.29 to 0.34) RECOMMENDED PCB LAYOUT - COMPONENT VIEW A ENVIRONNEMENTAL: OPERATING TEMPERATURE: -25°C UP TO 85°C FLAMABILITY RATING: UL94-V0 COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL: CURRENT RATING: 1A WORKING VOLTAGE: 125V INSULATION RESISTANCE: >100MOHM DIELECTRIC WITHSTANDING VOLT.: 500VAC/MN CONTACT RESISTANCE: 20mOHM MAX STANDARD CERTIFIED: E323964 / MODEL NUMBER 686 FOLLOWED BY 1, FOLLOWED BY 03 THRU 30, FOLLOWED BY 141 OR 144, FOLLOWED BY NUMERIC DIGITS B SOLDERING: REFLOW PROCESS ONLY DIMENSION: A =B + 8.00 B =1.00 x (NB PINS - 1) C =B + 2.1 D =B + 6.00 C RoHS Compliant *NOTE: theoretical value related to the Tin plating; however, due to the sensitive actuator, we recommend not to make more than 1 or 2 cycles in order to maintain acceptable mechanical & electrical conditions N 05-JUN-15 TPK REVIEW AK M 13-DEC-13 TPK UPDATE QL L 10-APR-13 ACTUATOR AR K 23-JAN-13 UNIT µ => µ’’ QL J 18-SEP-12 MC NOTE GG I 28-JUN-12 COLOR GG H 26-JUN-12 DIM REV DATE FILE PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 SCALE: DESCRIPTION: 1.0MM ZIF FPC HORIZONTAL BOTTOM CONTACT TYPE TAPE & REEL PACKAGING GG SHEET: 1/2 WERI PART NO: 686 1xx 144 22 BY DRAW: PEARL APPROVAL: GMo UNIT: MM SIZE A4 D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: GMo B A REV DATE FILE BY SCALE: DESCRIPTION: 1.0MM ZIF FPC HORIZONTAL BOTTOM CONTACT TYPE TAPE & REEL PACKAGING SHEET: 2/2 WERI PART NO: 686 1xx 144 22 UNIT: MM DRAW: AK SIZE A4 D 1 1 2 2 Pull the actuator upwards in the open position Insert the FFC cable vertically until the conductor almost disappears A B 1 2 Press actuator in the middle to make there is no gap and the actuator is locked Press both ends of the actuator A Pull the actuator as horizontally as possible by a proper force Do not pull the actuator too far otherwise the stop limit (hook on actuator) may be broken B Do not keep FFC inclined when insertion Don’t keep conductor toward actuator