1 2 3 4 5 TECHNICAL CHARACTERISTICS A MATERIAL INSULATOR: PA6T FLAMMABILITY RATING: UL94V0 COLOR: WHITE CONTACT MATERIAL: PHOSPHOR BRONZE CONTACT PLATING: 3.05 µm MAT TIN OVER 1.27 µm Ni SOLDER TAB MATERIAL: BRASS SOLDER TAB PLATING: 3.05 µm MAT TIN OVER 1.27 µm Ni ENVIRONMENTAL OPERATING TEMPERATURE: -25°C UP TO +85°C COMPLIANCE: HALOGEN AND ROHS PCB LAYOUT - COMPONENT VIEW ELECTRICAL CURRENT RATING: 1A MAX WORKING VOLTAGE: 150 VAC WITHSTANDING VOLTAGE: 1300 VAC/MIN INSULATION RESISTANCE: > 1000 MΩ CONTACT RESISTANCE: 20 mΩ MAX B PITCH: 1,50 mm SOLDERING JEDEC LEAD FREE REFLOW SOLDERING PROCESS PACKAGING TAPE & REEL DIMENSION A= 1.5 x (NB. PIN -1) B= A + 5.3 C= A + 4.5 D= A + 3.2 C RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 F E D C APPROVAL: GMo B UNIT: MM DESCRIPTION: BtB 1.50MM PITCH PLUG HORIZONTAL SIZE WERI PART NO: 695 4xx 150 122 A4 SCALE: A 16-JUN-15 PDF AK SHEET: 1/4 REV DATE FILE BY DRAW: AK D 1 2 3 4 5 A B C 1800 pcs/reel 9 reels/carton 16200 pcs/carton RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 F E D C APPROVAL: GMo B A REV UNIT: MM DESCRIPTION: BtB 1.50MM PITCH PLUG HORIZONTAL SIZE WERI PART NO: 695 4xx 150 122 A4 SCALE: SHEET: 2/4 PDF DATE FILE BY DRAW: AK D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 F E D C APPROVAL: GMo B DESCRIPTION: BtB 1.50MM PITCH PLUG HORIZONTAL SIZE WERI PART NO: 695 4xx 150 122 A4 SCALE: A REV UNIT: MM SHEET: 3/4 PDF DATE FILE BY DRAW: AK D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 4/4 REV DATE FILE BY DRAW: QL D