1 2 3 4 5 TECHNICAL CHARACTERISTICS A MATERIAL INSULATOR: LCP COLOR: BLACK CONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED CONTACT PLATING: TIN QUALITY CLASS: 25 MATING CYCLES PITCH: 3.00MM ENVIRONMENTAL OPERATING TEMPERATURE: -40 UP TO 105°C FLAMABILITY RATING: UL94-V0 COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING:5A WORKING VOLTAGE: 250V AC INSULATOR RESISTANCE: >1000 MOHM DIELECTRIC WITHSTANDING VOLTAGE: 1500V AC/MN CONTACT RESISTANCE: 10 mOHM MAX B STANDARD CERTIFIED: E323964 SOLDERING JEDEC LEAD FREE WAVE SOLDERING PROCESS PACKAGING TUBE DIMENSION A = 3.00 x (NB. PIN - 1) B = 3.00 x (NB. PIN + 1) + 0.65 C = 3.00 x (NB. PIN - 3) + 1.70 LAST CKT. C CKT.#1 RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 QP SCALE: DESCRIPTION: 3.00MM MALE SINGLE ROW RIGHT ANGLE HEADER WITH PLASTIC PEGS SOLDERING QL SHEET: 1/3 WERI PART NO: 662 0xx 110 22 FILE BY DRAW: PEARL J 02-JUL-15 I 28-AVR-15 PEG DIMENSION PINNING H 17-FEB-14 REV DATE AK APPROVAL: BBu UNIT: MM SIZE A4 D 1 2 3 4 5 A N B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: BBu B A REV DATE FILE BY SCALE: DESCRIPTION: 3.00MM MALE SINGLE ROW RIGHT ANGLE HEADER WITH PLASTIC PEGS SHEET: 2/3 WERI PART NO: 662 0xx 110 22 UNIT: MM DRAW: PEARL SIZE A4 D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D