GPAS1001 - GPAS1007 Taiwan Semiconductor CREAT BY ART 10A, 50V - 1000V Glass Passivated Rectifiers FEATURES - Glass passivated chip junction - High efficiency, Low VF - High current capability - High surge current capability - Low power loss - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 2 TO-263AB (D PAK) MECHANICAL DATA Case: TO-263AB (D2PAK) Molding compound, UL flammability classification rating 94V-0 Moisture sensitivity level: level 1, per J-STD-020 Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test Polarity: As marked Weight: 1.7 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL GPAS GPAS GPAS GPAS GPAS GPAS GPAS 1001 1002 1003 1004 1005 1006 1007 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current IF(AV) 10 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A VF 1.1 V Maximum instantaneous forward voltage (Note 1) IF= 10 A Maximum reverse current @ rated VR TJ=25°C TJ=125°C Typical junction capacitance (Note 3) Typical thermal resistance Operating junction temperature range Storage temperature range IR 5 100 μA CJ 50 pF RθJC 4 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Document Number: DS_D0000118 Version: B15 GPAS1001 - GPAS1007 Taiwan Semiconductor ORDERING INFORMATION PART NO. PACKING CODE PACKING CODE SUFFIX RN GPAS100x (Note 1) PACKAGE PACKING D2PAK 800 / 13" Paper reel (*) G MN 2 800 / 13" Plastic reel D PAK Note 1: "x" defines voltage from 50V (GPAS1001) to 1000V (GPAS1007) *: Optional available EXAMPLE PREFERRED PART NO. GPAS1007 RNG PART NO. PACKING CODE GPAS1007 RN PACKING CODE DESCRIPTION SUFFIX G Green compound RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 MAXMUM FORWARD CURRENT DERATING CURVE FIG. 2 TYPICAL REVERSE CHARACTERISTICS AVERAGE FORWARD CURRENT(A) 10 8 6 4 RESISTIVE OF INDUCTIVE LOAD 2 0 0 50 100 150 INSTANTANEOUS REVERSE CURRENT (μA) 100 12 10 TJ=125°C 1 TJ=25°C 0.1 0 CASE TEMPERATURE(°C) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 4 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 150 8.3ms Single Half Sine Wave 125 100 75 50 25 0 1 10 NUMBER OF CYCLES AT 60 Hz Document Number: DS_D0000118 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT(A) 175 10 1 Pulse Width=300us 1% Duty Cycle 0.1 0.6 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE (V) 1.8 2 Version: B15 GPAS1001 - GPAS1007 Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 120 100 80 60 40 20 f=1.0MHz Vslg=50mVp-p 0 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS 2 TO-263AB (D PAK) DIM. Unit (mm) Unit (inch) Min Max Min Max A - 10.5 - 0.413 B 14.60 15.88 0.575 0.625 C 2.41 2.67 0.095 0.105 D 0.68 0.94 0.027 0.037 E 2.29 2.79 0.090 0.110 F 4.44 4.70 0.175 0.185 G 1.14 1.40 0.045 0.055 H 1.14 1.40 0.045 0.055 I 8.25 9.25 0.325 0.364 J 0.36 0.53 0.014 0.021 K 2.03 2.79 0.080 0.110 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 10.8 0.425 B 8.3 0.327 C 1.1 0.043 D 3.5 0.138 E 16.9 0.665 F 9.5 0.374 G 2.5 0.098 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Document Number: DS_D0000118 Version: B15 GPAS1001 - GPAS1007 Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D0000118 Version: B15