S1GM - S1JM Taiwan Semiconductor CREAT BY ART 1A, 400V - 600V Surface Mount Rectifiers FEATURES - Ideal for automated placement - Low forward voltage drop - Glass passivated chip junction - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: Micro SMA Micro SMA Molding compound, UL flammability classification rating 94V-0 Moisture sensitivity level: level 1, per J-STD-020 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: Indicated by cathode band Weight: 0.006 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL Marking code S1GM S1JM A5 A7 400 600 UNIT Maximum repetitive peak reverse voltage VRRM Maximum average forward rectified current IF(AV) 1 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 20 A VF 1.1 V Maximum instantaneous forward voltage (Note 1) @1A Maximum reverse current @ rated VR TJ=25°C TJ=125°C IR 1 50 V μA Typical reverse recovery time (Note 2) trr 780 ns Typical junction capacitance (Note 3) CJ 5 pF RθJL RθJA 30 110 °C/W TJ -55 to +175 °C TSTG -55 to +175 °C Typical Thermal Resistance Operating junction temperature range Storage temperature range Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Document Number: DS_D1410012 Version: F15 S1GM - S1JM Taiwan Semiconductor CREAT BY ART ORDERING INFORMATION PART NO. PART NO. PACKING CODE PACKING CODE SUFFIX S1xM (Note 1,2) PACKAGE PACKING Micro SMA 3,000 / 7" Plastic reel SUFFIX H RS G Note 1: "x" defines voltage from 400V (S1GM) to 600V (S1JM) Note 2: Whole series with green compound EXAMPLE PREFERRED PART NO. PART NO. PART NO. S1GMHRSG SUFFIX H S1GM PACKING CODE PACKING CODE DESCRIPTION SUFFIX RS AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG. 2 TYPICAL REVERSE CHARACTERISTICS 100 1.2 1 0.8 0.6 0.4 RESISTIVE OR INDUCTIVE LOAD 0.2 0 0 25 50 75 100 125 150 175 LEAD TEMPERATURE (°C) INSTANTANEOUS REVERSE CURRENT (μA) AVERAGE FORWARD CURRENT (A) FIG.1 FORWARD CURRENT DERATING CURVE 10 TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0.001 10 20 30 40 50 60 70 80 90 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 100 8.3ms Single Half Sine Wave 10 1 1 10 NUMBER OF CYCLES AT 60 Hz Document Number: DS_D1410012 FIG. 4 TYPICAL FORWARD CHARACTERISTICS 10 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE URRENT(A) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1 Pulse Width=300μs 1% Duty Cycle 0.1 0.4 0.6 0.8 1 1.2 1.4 1.6 FORWARD VOLTAGE (V) 1.8 2 Version: F15 S1GM - S1JM Taiwan Semiconductor CREAT BY ART FIG. 5 TYPICAL JUNCTION CAPACITANCE CAPACITANCE (pF) 10 f=1.0MHz Vsig=50mVp-p 1 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS Micro SMA DIM. A Unit (mm) Unit (inch) Min Max Min Max 2.30 2.70 0.091 0.106 B 2.10 2.30 0.083 0.091 C 0.63 0.73 0.025 0.029 D 0.10 0.20 0.004 0.008 E 1.15 1.35 0.045 0.053 F 0.65 0.85 0.026 0.034 G 1.15 1.35 0.045 0.053 H 0.75 0.95 0.030 0.037 I 1.10 1.50 0.043 0.059 J 0.55 0.75 0.022 0.030 K 0.55 0.75 0.022 0.030 L 0.65 0.85 0.026 0.034 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 1.1 0.043 B 2.0 0.079 C 0.5 0.020 D 0.8 0.031 E 1.0 0.039 MARKING DIAGRAM P/N = Marking code YW = Date Code Document Number: DS_D1410012 Version: F15 S1GM - S1JM Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1410012 Version: F15