SMAJ HV SERIES Taiwan Semiconductor CREAT BY ART 400W, 200V - 440V Surface Mount Transient Voltage Suppressor FEATURES - Low profile package - Ideal for automated placement - Glass passivated junction - Excellent clamping capability - Fast response time: Typically less than 1.0ps - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 DO-214AC (SMA) MECHANICAL DATA Case: DO-214AC (SMA) Molding compound: UL flammability classification rating 94V-0 Packing code with suffix "G" means Green compound (halogen-free) Moisture sensitivity level: level 1, per J-STD-020 Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test Polarity: Indicated by cathode band Weight: 0.06 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak power dissipation at TA=25°C, Tp=1ms (Note 1) PPK 400 W Steady state power dissipation PD 1 W Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 40 A VF 3.5 / 5.0 V TJ - 55 to +150 °C TSTG - 55 to +150 °C Maximum instantaneous forward voltage at 25 A for Unidirectional only (Note 2) Operating junction temperature range Storage temperature range Note 1: Non-repetitive current pulse per fig. 3 and derated above TA=25°C per fig. 2 Note 2: VF<3.5V for VWM≤250V, VF<5.0V for VWM>250V Devices for Bipolar Applications 1. For bidirectional use CA suffix 2. Electrical characteristics apply in both directions ORDERING INFORMATION PART NO. PACKING CODE SMAJxxxx (Note 1) PACKING CODE SUFFIX R3 R2 G M2 PACKAGE PACKING SMA 1,800 / 7" Plastic reel SMA 7,500 / 13" Paper reel SMA 7,500 / 13" Plastic reel Note 1: "xxxx" defines voltage from 200V (SMAJ200A) to 440V (SMAJ440A) EXAMPLE EXAMPLE P/N PART NO. PACKING CODE SMAJ200A R3G SMAJ200A R3 PACKING CODE SUFFIX G DESCRIPTION Green compound Version: H1602 SMAJ HV SERIES Taiwan Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG. 1 PEAK PULSE POWER RATING CURVE FIG.2 PULSE DERATING CURVE 125 Non-repetitive pulse waveform shown in fig.3 PEAK PULSE POWER(PPP) OR CURRENT (IPP) A DERATING IN PERCENTAGE (%) PPPM, PEAK PULSE POWER, KW 100 100 10 1 0.1 0.1 1 10 100 1000 75 50 25 0 0 10000 Pulse width(td) is defined as the point where the peak current decays to 50% of IPPM Peak value IPPM 100 Half value-IPPM/2 80 10/1000μs, waveform as defined by R.E.A. 60 40 20 td 0 0 0.5 1 1.5 2 2.5 3 3.5 4 t, TIME ms IFSM, PEAK FORWARD SURGE CURRENT (A) PEAK PULSE CURRENT (%) 120 75 100 125 150 175 200 FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY FIG. 3 CLAMPING POWER PULSE WAVEFORM tr=10μs 50 TA, AMBIENT TEMPERATURE (°C) tp, PULSE WIDTH, (μs) 140 25 50 8.3ms single half sine wave 40 30 20 10 0 1 10 100 NUMBER OF CYCLES AT 60 Hz FIG. 5 TYPICAL JUNCTION CAPACITANCE CJ, JUNCTION CAPACITANCE (pF) A 10000 Measured at zero bias 1000 100 f=1.0MHz Vsig=50mVp-p Measured at stand-off voltage,Vwm 10 1 10 100 V(BR), BREAKDOWN VOLTAGE (V) Version: H1602 SMAJ HV SERIES Taiwan Semiconductor Device Marking Code UNI BI UNI BI Working Peak Reverse Voltage VWM (V) SMAJ200A SMAJ200CA SV SVC SMAJ220A SMAJ220CA SX SMAJ250A SMAJ250CA SMAJ300A Device Breakdown Voltage Test VBR (V) Current at IT IT Maximum Clamping Voltage at IPPM Vc (V) Maximum Peak Pulse Surge Current IPPM (A) Maximum Reverse Leakage @ VWM IR (μA) Min Max (mA) 200 224 247 1 324 1.2 1 SXC 220 246 272 1 356 1.1 1 SZ SZC 250 279 309 1 405 1.0 1 SMAJ300CA TE TEC 300 335 371 1 486 0.8 1 SMAJ350A SMAJ350CA TG TGC 350 391 432 1 567 0.7 1 SMAJ400A SMAJ400CA TK TKC 400 447 494 1 648 0.6 1 SMAJ440A SMAJ440CA TM TMC 440 492 543 1 713 0.6 1 Notes: 1. Non-repetitive current pulse, per fig. 3 and derated above TA=25°C per fig. 2 2. Measure on 8.3ms single half sine-wave duty cycle=4 pulses per minutes maximum 3. Peak pulse power waveform is 10/1000 μs Version: H1602 SMAJ HV SERIES Taiwan Semiconductor PACKAGE OUTLINE DIMENSIONS DO-214AC(SMA) DIM. Unit (mm) Unit (inch) Min Max Min Max A 1.27 1.58 0.050 0.062 B 4.06 4.60 0.160 0.181 C 2.29 2.83 0.090 0.111 D 1.99 2.50 0.078 0.098 E 0.90 1.41 0.035 0.056 F 4.95 5.33 0.195 0.210 G 0.10 0.20 0.004 0.008 H 0.15 0.31 0.006 0.012 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 1.68 0.066 B 1.52 0.060 C 3.93 0.155 D 2.41 0.095 E 5.45 0.215 MARKING DIAGRAM P/N = Device Marking Code G= Green Compound YW = Date Code F= Factory Code Note: Cathode band for uni-directional products only Version: H1602 SMAJ HV SERIES Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Version: H1602