RS2A - RS2M Taiwan Semiconductor CREAT BY ART 2A, 50V - 1000V Surface Mount Fast Recovery Rectifiers FEATURES - Low power loss, high efficiency - Ideal for automated placement - Glass passivated junction chip. - Fast switching for high efficiency - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA DO-214AA (SMB) Case: DO-214AA (SMB) Molding compound, UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Moisture sensitivity level: level 1, per J-STD-020 Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: Indicated by cathode band Weight: 0.09 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL RS RS RS RS RS RS RS 2A 2B 2D 2G 2J 2K 2M UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current IF(AV) 2 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A VF 1.3 V Maximum instantaneous forward voltage (Note 1) IF= 2 A Maximum reverse current @ rated VR TJ=25°C TJ=125°C 5 IR μA 50 Maximum reverse recovery time (Note 2) trr Typical junction capacitance (Note 3) CJ 50 pF RθJL RθJA 18 55 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Typical thermal resistance Operating junction temperature range Storage temperature range 150 250 500 ns Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied VR=4.0 Volts Document Number: DS_D1407019 Version: I15 RS2A - RS2M Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. PACKING CODE PACKING CODE SUFFIX PACKAGE PACKING SMB 850 / 7" Plastic reel SUFFIX R5 RS2x (Note 1) H R4 G M4 SMB 3,000 / 13" Paper reel SMB 3,000 / 13" Plastic reel Note 1: "x" defines voltage from 50V (RS2A) to 1000V (RS2M) EXAMPLE PREFERRED PART NO. RS2MHR5G PART NO. PART NO. SUFFIX RS2M PACKING CODE PACKING CODE H DESCRIPTION SUFFIX R5 AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 FORWARD CURRENT DERATING CURVE FIG. 2 TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT (μA) AVERAGE FORWARD CURRENT (A) 2.5 2 1.5 1 RESISTIVE OR INDUCTIVE LOAD 0.5 0 TJ=125°C 10 1 TJ=25°C 0.1 0 25 50 75 100 125 0 150 LEAD TEMPERATURE (°C) 30 20 10 0 NUMBER OF CYCLES AT 60 Hz Document Number: DS_D1407019 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) 8.3ms Single Half Sine Wave 10 60 80 100 120 140 10 50 1 40 FIG. 4 TYPICAL FORWARD CHARACTERISTICS FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 40 20 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Pulse Width=300μs 1% Duty Cycle 1 0.1 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 FORWARD VOLTAGE (V) Version: I15 RS2A - RS2M Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE (pF) f=1.0MHz Vsig=50mVp-p 10 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS DO-214AA (SMB) Unit (mm) DIM. Unit (inch) Min Max Min Max A 1.95 2.10 0.077 0.083 B 4.25 4.75 0.167 0.187 C 3.48 3.73 0.137 0.147 D 1.99 2.61 0.078 0.103 E 0.90 1.41 0.035 0.056 F 5.10 5.30 0.201 0.209 G 0.10 0.20 0.004 0.008 H 0.15 0.31 0.006 0.012 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 2.3 0.091 B 2.5 0.098 C 4.3 0.169 D 1.8 0.071 E 6.8 0.268 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YW = Date Code F = Factory Code Document Number: DS_D1407019 Version: I15 RS2A - RS2M Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1407019 Version: I15