SFA801G - SFA808G Taiwan Semiconductor CREAT BY ART 8A, 50V - 600V Glass Passivated Super Fast Rectifiers FEATURES C - High efficiency, low VF - High current capability - High reliability - High surge current capability - Low power loss - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC 1 2 - Halogen-free according to IEC 61249-2-21 TO-220AC MECHANICAL DATA Case: TO-220AC Molding compound, UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: As marked Mounting torque: 0.56 Nm max. Weight: 1.8 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL SFA SFA SFA SFA SFA SFA SFA SFA 801G 802G 803G 804G 805G 806G 807G 808G UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 500 600 V Maximum average forward rectified current IF(AV) 8 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 125 A Maximum instantaneous forward voltage (Note 1) IF=8 A Maximum reverse current @ rated VR TJ=25°C TJ=100°C VF trr Typical junction capacitance (Note 3) CJ Typical thermal resistance Storage temperature range 1.7 1.3 10 IR Maximum reverse recovery time (Note 2) Operating junction temperature range 0.975 μA 400 35 100 V ns 60 pF RθJC 4 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Test conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and applied reverse voltage of 4.0V DC. Version: J1511 SFA801G - SFA808G Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. SUFFIX SFA80xG (Note 1) PACKING CODE PACKING CODE H SUFFIX C0 (*) G PACKAGE PACKING TO-220AC 50 / Tube Note 1: "x" defines voltage from 50V (SFA801G) to 600V (SFA808G) *: Optional available EXAMPLE EXAMPLE P/N PART NO. SFA808GHC0G SFA808G PART NO. PACKING CODE PACKING CODE SUFFIX H DESCRIPTION SUFFIX C0 AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 FORWARD CURRENT DERATING CURVE FIG. 2 TYPICAL REVERSE CHARACTERISTICS 1000 10 8 6 4 Resistive or inductive load with heat sink 2 0 0 25 50 75 100 CASE TEMPERATURE 150 10 TJ=75°C 1 TJ=25°C 0.1 0 INSTANTANEOUS FORWARD CURRENT (A) 50 0 NUMBER OF CYCLES AT 60 Hz 40 60 80 100 120 140 100 100 10 20 FIG. 4 TYPICAL FORWARD CHARACTERISTICS 150 1 TJ=100°C PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 8.3ms single half sine wave 200 100 (°C) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 250 PEAK FORWARD SURGE CURRENT(A) 125 INSTANTANEOUS REVERSE CURRENT(μA) AVERAGE FORWARD CURRENT (A) 12 100 SFA801G-SFA804G 10 SFA805G-SFA806G 1 SFA807G-SFA808G Pulse width=300μs 1% duty cycle 0.1 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 1.8 2 Version: J1511 SFA801G - SFA808G Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE (pF) 90 SFA801G-SFA804G 80 70 60 SFA805G-SFA808G 50 40 1 10 100 1000 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS TO-220AC DIM. Unit (mm) Unit (inch) Min Max Min Max A - 10.50 - 0.413 B 2.62 3.44 0.103 0.135 C 2.80 4.20 0.110 0.165 D 0.68 0.94 0.027 0.037 E 3.54 4.00 0.139 0.157 F 14.60 16.00 0.575 0.630 G 0.00 1.60 0.000 0.063 H 13.19 14.79 0.519 0.582 I 4.95 5.20 0.195 0.205 J 4.42 4.76 0.174 0.187 K 1.14 1.40 0.045 0.055 L 5.84 6.86 0.230 0.270 M 2.20 2.80 0.087 0.110 N 0.35 0.64 0.014 0.025 MARKING DIAGRAM P/N = Marking Code G = Green Compound YWW = Date Code F = Factory Code Version: J1511 SFA801G - SFA808G Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Version: J1511