SFAS1008G Taiwan Semiconductor CREAT BY ART 10A, 600V Surface Mount Super Fast Rectifier FEATURES - Glass passivated junction chip - Ideal for automated placement - High efficiency, low VF - High surge current capability - Low power loss - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 2 TO-263AB (D PAK) MECHANICAL DATA Case: TO-263AB (D2PAK) Molding compound: UL flammability classification rating 94V-0 Moisture sensitivity level: level 1, per J-STD-020 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: As marked Weight: 1.33 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL SFAS1008G UNIT Maximum repetitive peak reverse voltage VRRM 600 V Maximum RMS voltage VRMS 420 V Maximum DC blocking voltage VDC 600 V Maximum average forward rectified current IF(AV) 10 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 125 A VF 1.7 V Maximum instantaneous forward voltage IF= 10 A Maximum reverse current @ rated VR TJ=25°C IR TJ=100°C 10 400 μA Maximum reverse recovery time (Note 1) trr 35 ns Typical junction capacitance (Note 2) CJ 60 pF RθJC 2.2 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Typical thermal resistance Operating junction temperature range Storage temperature range Note 1: Test conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 2: Measured at 1 MHz and applied reverse voltage of 4.0V DC. Version: D1511 SFAS1008G Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. PACKING SUFFIX CODE SFAS1008G PACKING CODE SUFFIX RN H PACKAGE (*) 800 / 13" Paper reel D2PAK G MN PACKING 800 / 13" Plastic reel *: Optional available EXAMPLE EXAMPLE P/N PART NO. SFAS1008GHRNG SFAS1008G PART NO. SUFFIX PACKING CODE PACKING CODE H DESCRIPTION SUFFIX RN AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 FORWARD CURRENT DERATING CURVE FIG. 2 TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT (μA) AVERAGE FORWARD CURRENT (A) 12 10 8 6 4 Resistive or inductive load with heat sink 2 0 0 25 50 75 100 CASE TEMPERATURE 125 TJ=25°C 0.01 0 60 80 100 120 140 100 90 60 30 0 NUMBER OF CYCLES AT 60 Hz 40 FIG. 4 TYPICAL FORWARD CHARACTERISTICS 8.3ms single half sine wave 10 20 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT(A) 0.1 (°C) 150 1 TJ=100°C 150 FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 120 1 100 10 1 Pulse width=300μs 1% duty cycle 0.1 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 FORWARD VOLTAGE (V) Version: D1511 SFAS1008G Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE 100 f=1.0MHz Vsig=50mVp-p CAPACITANCE (pF) 90 80 70 60 50 40 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS 2 TO-263AB (D PAK) DIM. Unit (mm) Unit (inch) Min Max Min Max A - 10.5 - 0.413 B 14.60 15.88 0.575 0.625 C 2.41 2.67 0.095 0.105 D 0.68 0.94 0.027 0.037 E 2.29 2.79 0.090 0.110 F 4.44 4.70 0.175 0.185 G 1.14 1.40 0.045 0.055 H 1.14 1.40 0.045 0.055 I 8.25 9.25 0.325 0.364 J 0.36 0.53 0.014 0.021 K 2.03 2.79 0.080 0.110 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 10.8 0.425 B 8.3 0.327 C 1.1 0.043 D 3.5 0.138 E 16.9 0.665 F 9.5 0.374 G 2.5 0.098 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Version: D1511 SFAS1008G Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Version: D1511