SFT11G - SFT18G Taiwan Semiconductor CREAT BY ART 1A, 50V - 600V Glass Passivated Super Fast Rectifiers FEATURES - High efficiency, low VF - High current capability - High reliability - High surge current capability - Low power loss - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 MECHANICAL DATA Case: TS-1 TS-1 Molding compound, UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Pure tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Weight: 0.2g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL SFT SFT SFT SFT SFT SFT SFT SFT 11G 12G 13G 14G 15G 16G 17G 18G UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 500 600 V Maximum average forward rectified current IF(AV) 1 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Maximum instantaneous forward voltage (Note 1) @1A Maximum reverse current @ rated VR TJ=25°C TJ=125°C VF trr Typical junction capacitance (Note 3) CJ Operating junction temperature range Storage temperature range 1.3 1.7 5 IR Maximum reverse recovery time (Note 2) Typical thermal resistance 0.95 μA 100 35 20 V ns 10 pF RθJA 100 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Document Number: DS_D1312029 Version: I15 SFT11G - SFT18G Taiwan Semiconductor CREAT BY ART ORDERING INFORMATION PART NO. PART NO. PACKING SUFFIX CODE PACKING CODE SUFFIX (*) PACKAGE PACKING TS-1 3,000 / Ammo box (52mm taping) TS-1 3,000 / Ammo box (26mm taping) TS-1 5,000 / 13" Paper reel TS-1 1,000 / Bulk packing A0 SFT1xG (Note 1) A1 H G R0 B0 Note 1: "x" defines voltage from 50V (SFT11G) to 600V (SFT18G) *: Optional available EXAMPLE PREFERRED P/N PART NO. SFT16GHA0G SFT16G PART NO. PACKING CODE SUFFIX H PACKING CODE DESCRIPTION SUFFIX A0 AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.2 TYPICAL REVERSE CHARACTERISTICS 1000 1.5 RESISTIVE OR INDUCTIVE LOAD 1.0 0.5 0.0 0 25 50 75 100 125 150 175 INSTANTANEOUS REVERSE CURRENT (μA) AVERAGE FORWARD CURRENT (A) FIG.1 MAXIMUM AVERAGE FORWARD CURRENT DERATING 100 TJ=125°C 10 TJ=75°C 1 TJ=25°C 0.1 0 AMBIENT TEMPERATURE (°C) 8.3ms Single Half Sine Wave 15 10 5 0 Document Number: DS_D1312029 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) 25 NUMBER OF CYCLES AT 60 Hz 80 100 120 140 100 30 10 60 FIG. 4 TYPICAL FORWARD CHARACTERISTICS 35 1 40 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 20 20 Pulse Width=300μs 1% Duty Cycle 10 SFT15G-SFT16G SFT11G-SFT14G 1 SFT17G-SFT18G 0.1 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 FORWARD VOLTAGE (V) Version: I15 SFT11G - SFT18G Taiwan Semiconductor CREAT BY ART FIG. 5 TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 70 f=1.0MHz Vslg=50mVp-p 60 50 40 SFT11G-SFT14G 30 20 10 SFT15G-SFT18G 0 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS TS-1 DIM. Unit (mm) Unit (inch) Min Max Min Max A 2.00 2.70 0.079 0.106 B 0.53 0.64 0.021 0.025 C 25.40 - 1.000 - D 3.00 3.30 0.118 0.130 E 25.40 - 1.000 - MARKING DIAGRAM P/N = Specific Device Code G= Green Compound YW = Date Code F= Factory Code Document Number: DS_D1312029 Version: I15 SFT11G - SFT18G Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1312029 Version: H13