TPUH6D - TPUH6J Taiwan Semiconductor CREAT BY ART 6A, 200V - 600V Surface Mount Ultrafast Rectifiers FEATURES - Very low profile, typical height of 1.1mm - Excellent high temperature stability - Glass passivated chip junction - Controled avalanche characteristics - Low leakage current 3 - High forward surge capability - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 1 2 TO-277A (SMPC) TYPICAL APPLICATIONS For use in high voltage, high frequency power factor corrections, switching mode power supplies, freewheeling diodes and secondary dc to dc rectifications MECHANICAL DATA Case: TO-277A (SMPC) Molding compound, UL flammability classification rating 94V-0 Moisture sensitivity level: level 1, per J-STD-020 Part no. with suffix "H" means AEC-Q101 qualified Packing code suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 1A whisker test Polarity: Indicated by cathode band Weight: 95 mg (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL TPUH6D TPUH6J UH6D UH6J 200 600 Marking code UNIT Maximum repetitive peak reverse voltage VRRM Maximum average forward rectified current IF(AV) 6 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 80 A Maximum instantaneous forward voltage (1) Test condition TYP MAX TYP MAX TJ=25°C 0.80 - 1.98 - 0.65 - 1.23 - TJ=25°C 0.87 1.05 2.45 3.00 TJ=125°C 0.73 0.90 1.59 1.80 IF=3A IF=6A TJ=125°C TJ=25°C Maximum reverse current @ rated VR Maximum reverse recovery time V TJ=125°C IF=0.5A, IR=1A, IRR=0.25A IF=1A, di/dt=-50A/μs, VR=30V Typical thermal resistance Typical junction capacitance (4) Operating junction temperature range Storage temperature range VF 10 IR 200 25 trr 45 RθJM (2) 12 (3) 80 RθJA CJ V μA ns °C/W 50 pF TJ - 55 to +175 °C TSTG - 55 to +175 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Mounted on FR4 PCB with 16mm x 16mm Cu pad area Note 3: Free air, mounted on recommned pad Note 4: Measured at 1 MHz and Applied VR=4.0 V Document Number: DS_D1411082 Version: C15 TPUH6D - TPUH6J Taiwan Semiconductor ORDERING INFORMATION PART NO. TPUH6x (Note 1, 2) PART NO. PACKING PACKING CODE SUFFIX CODE SUFFIX S1 H PACKAGE PACKING SMPC 1,500/ 7" Plastic reel SMPC 6,000/ 13" Plastic reel G S2 Note 1: "x" defines voltage from 200V (TPUH6D) to 600V (TPUH6J) Note 2: Whole series with green compound EXAMPLE PREFERRED PART NO. TPUH6JHS1G PART NO. PART NO. SUFFIX H TPUH6J PACKING CODE PACKING CODE DESCRIPTION SUFFIX AEC-Q101 qualified Green compound G S1 RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 MAXIMUM FORWARD CURRENT DERATING CURVE 8 FIG. 2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 TPUH6J 6 4 2 RESISTOR OR INDUCTIVE LOAD WITH HEATSINK 0 0 25 50 75 100 125 150 175 INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD CURRENT (A) TPUH6D TJ=125°C 10 TJ=25°C 1 Pulse Width=300μs 1% Duty Cycle 0.1 0 0.5 1 FIG. 3 MAXIMUM NON-REPETITIVE FORWARD PEAK SURGE CURRENT 60 40 20 0 10 NUMBER OF CYCLES AT 60 Hz 100 INSTANTANEOUS REVERSE CURRENT (μA) PEAK FORWARD SURGE CURRENT (A) 8.3ms Single Half Sine Wave 1 2 2.5 3 3.5 FIG. 4 TYPICAL REVERSE CHARACTERISTICS 100 80 1.5 FORWARD VOLTAGE (V) LEAD TEMPERATURE (oC) 100 10 TJ=125°C 1 0.1 TJ=25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Document Number: DS_D1411082 Version: C15 TPUH6D - TPUH6J Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 1000 100 f=1.0MHz Vsig=50mVp-p 10 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS TO-277A (SMPC) DIM. Unit (mm) Unit (inch) Min Max Min Max A 5.650 5.750 0.222 0.226 B 6.350 6.650 0.250 0.262 C 4.550 4.650 0.179 0.183 D 3.540 3.840 0.139 0.151 E 4.235 4.535 0.167 0.179 F 1.850 2.150 0.073 0.085 G 3.170 3.470 0.125 0.137 H I 1.043 1.000 1.343 1.300 0.041 0.039 0.053 0.051 J 1.930 2.230 0.076 0.088 K 0.175 0.325 0.007 0.013 L 1.000 1.200 0.039 0.047 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 4.80 0.189 B 4.72 0.186 C 1.40 0.055 D 1.27 0.050 E 6.80 0.268 F 1.04 0.041 MARKING DIAGRAM P/N = Marking Code YW = Date Code F = Factory Code Document Number: DS_D1411082 Version: C15 TPUH6D - TPUH6J Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1411082 Version: C15