UG06A - UG06D Taiwan Semiconductor CREAT BY ART 0.6A, 50V - 200V Glass Passivated Ultra Fast Rectifiers FEATURES - Glass passivated chip junction - Ultrafast recovery time for high efficiency - Excellent high temperature switching - Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 MECHANICAL DATA Case: TS-1 TS-1 Molding compound, UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Pure tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Weight: 0.2g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL UG06A UG06B UG06C UG06D UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V Maximum RMS voltage VRMS 25 70 105 140 V Maximum DC blocking voltage VDC 50 100 150 200 V Maximum average forward rectified current IF(AV) 0.6 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 40 A VF 0.95 V Maximum instantaneous forward voltage (Note 1) @ 0.6 A Maximum reverse current @ rated VR TJ=25°C TJ=125°C IR 5 150 μA Maximum reverse recovery time (Note 2) trr 15 ns Typical junction capacitance (Note 3) CJ 9 pF RθJL RθJA 28 97 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Typical thermal resistance Operating junction temperature range Storage temperature range Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Document Number: DS_D1407024 Version: F15 UG06A - UG06D Taiwan Semiconductor CREAT BY ART ORDERING INFORMATION PART NO. PART NO. PACKING SUFFIX CODE PACKING CODE SUFFIX (*) PACKAGE PACKING TS-1 3,000 / Ammo box (52mm taping) TS-1 3,000 / Ammo box (26mm taping) TS-1 5,000 / 13" Paper reel TS-1 1,000 / Bulk packing A0 UG06x (Note 1) A1 H G R0 B0 Note 1: "x" defines voltage from 50V (UG06A) to 200V (UG06D) *: Optional available EXAMPLE PREFERRED P/N PART NO. UG06DHA0G UG06D PART NO. PACKING CODE PACKING CODE SUFFIX H DESCRIPTION SUFFIX A0 AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 MAXIMUM FORWARD CURRENT DERATING CURVE FIG. 2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 PEAK FORWARD SURGE CURRENT (A) AVERAGE FORWARD RECTIFIED CURRENT (A) 0.75 0.6 0.45 0.3 RESISTIVE OR INDUCTIVE LOAD 0.15 8.3ms Single Half Sin Wave 10 0 0 25 50 75 100 125 1 150 1 10 LEAD TEMPERATURE (°C) 1000 INSTANTANEOUS REVERSE CURRENT (μA) INSTANTANEOUS FORWARD CURRENT (A) FIG. 4 TYPICAL REVERSE CHARACTERISTICS FIG. 3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 TJ=100°C TJ=50°C 1 Pulse Width=300μs 1% Duty Cycle 0.1 0.4 0.6 0.8 1.0 1.2 FORWARD VOLTAGE (V) 100 NUMBER OF CYCLES AT 60 Hz 1.4 1.6 100 TJ=100°C 10 TJ=50°C 1 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Document Number: DS_D1407024 Version: F15 UG06A - UG06D Taiwan Semiconductor CREAT BY ART FIG. 5 TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 100 f=1.0MHz Vsig=50mVp-p 10 1 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS TS-1 DIM. Unit (mm) Unit (inch) Min Max Min Max A 2.00 2.70 0.079 0.106 B 0.53 0.64 0.021 0.025 C 25.40 - 1.000 - D 3.00 3.30 0.118 0.130 E 25.40 - 1.000 - MARKING DIAGRAM P/N = Specific Device Code G= Green Compound YW = Date Code F= Factory Code Document Number: DS_D1407024 Version: F15 UG06A - UG06D Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1407024 Version: F15