UGF12JD Taiwan Semiconductor CREAT BY ART 12A, 600V Isolated Ultrafast Rectifier FEATURES - Especially suited as boost diode on continuous mode power factor correctors - Ideal solution for hard switching condition - High capability for high di/dt operation. Downsizing of mosfet and heatsink. - High surge current capability 1 - High operation temperature to TJ 175°C 2 - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC ITO-220AC - Halogen-free according to IEC 61249-2-21 - AEC-Q101 qualified (Green compound not involved) DESCRIPTION Especially suited as free wheeling or boost diode in continuous mode power factor correctors and other power switching applications. The low stored charge and ultrafast soft recovery minimizes ringing and electrical noise in power switching circuits. The family drastically cuts losses in the associated MOSFET when run at high dIF/dt. MECHANICAL DATA Case: ITO-220AC Molding compound, UL flammability classification rating 94V-0 Part no. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: As marked Mounting torque: 0.56 Nm max. Weight: 1.7 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL UGF12JD UNIT Maximum repetitive peak reverse voltage VRRM 600 V Maximum RMS voltage VRMS 420 V Maximum DC blocking voltage VDC 600 V Maximum average forward rectified current IF(AV) 12 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 100 A Maximum instantaneous forward voltage (Note 1) IF=12A Maximum reverse current @ rated VR TJ=25°C TJ=125°C VF Operating junction temperature range Storage temperature range 0.5 V μA 100 MAX 13 25 - 45 TYP MAX Qrr 90 - nC IRM 3.8 4.6 A trr Reverse recovery charges Typical thermal resistance 3.1 TYP IF=1A, dIF/dt=-50A/μs, VR=30V, TJ=25°C IF=12A, dIF/dt=-200A/µs, VR=400V, TJ=125°C MAX IR Reverse recovery time IF=0.5A, IR=1A, IRR=0.25A, TJ=25°C TYP ns RθJC 2.4 °C/W TJ - 55 to +175 °C TSTG - 55 to +175 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Version: B1512 UGF12JD Taiwan Semiconductor CREAT BY ART ORDERING INFORMATION PART NO. PART NO. SUFFIX UGF12JD PACKING CODE H PACKING CODE SUFFIX C0 G PACKAGE PACKING ITO-220AC 50 / Tube EXAMPLE EXAMPLE P/N PART NO. UGF12JDHC0 UGF12JD PART NO. PACKING CODE SUFFIX H PACKING CODE DESCRIPTION SUFFIX C0 AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG. 2 TYPICAL REVERSE CHARACTERISTICS AVERAGE FORWARD CURRENT (A) 14 12 10 8 6 4 Resistive or inductive load with heat sink 2 0 0 25 50 75 100 125 150 175 INSTANTANEOUS REVERSE CURRENT (μA) FIG.1 FORWARD CURRENT DERATING CURVE 100 TJ=125°C 10 1 0.1 TJ=25°C 0.01 10 100 8.3ms single half sine wave 60 40 20 0 10 NUMBER OF CYCLES AT 60 Hz 40 50 60 70 80 90 100 100 FIG. 4 TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) FIG. 3 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1 30 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) CASE TEMPERATURE (°C) 80 20 100 10 TJ=125°C 1 TJ=25°C 0.1 0 0.5 1 1.5 2 2.5 3 3.5 4 FORWARD VOLTAGE (V) Version: B1512 UGF12JD Taiwan Semiconductor CREAT BY ART FIG. 5 TYPICAL JUNCTION CAPACITANCE 1000 CAPACITANCE (pF) f=1.0MHz Vsig=50mVp-p 100 10 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS ITO-220AC DIM. Unit (mm) Unit (inch) Min Max Min Max A 4.30 4.70 0.169 0.185 B 2.50 3.10 0.098 0.122 C 2.30 2.90 0.091 0.114 D 0.46 0.76 0.018 0.030 E 6.30 6.90 0.248 0.272 F 9.60 10.30 0.378 0.406 G 3.00 3.40 0.118 0.134 H 0.00 1.60 0.000 0.063 I 0.95 1.45 0.037 0.057 J 0.50 0.90 0.020 0.035 K 2.40 3.20 0.094 0.126 L 14.80 15.50 0.583 0.610 M - 4.10 - 0.161 N - 1.80 - 0.071 O 12.60 13.80 0.496 0.543 P 4.95 5.20 0.195 0.205 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YWW = Date Code F = Factory Code Version: B1512 UGF12JD Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Version: B1512