1 2 3 4 5 OPERATION 1 - INSERT THE TIP OF THE TOOL DOWN SIDE "A" OR "B", ON THE MATING END OF THE PLUG OR RECEPTACLE , TO THE STOP. A 2 - ROTATE TOOL CLOCKWISE THEN COUNTER-CLOCKWISE APPROXIMATELY 25° TO 30° IN EATCH DIRECTION, ONCE OR TWICE. 3 - REAPEAT STEPS 1 AND 2 ON OPPOSITE SIDE OF TERMINAL. 4 - PULL ON THE WIRE AND REMOVE THE TERMINAL FROM THE HOUSING. NOTE: WHEN A TERMINAL IS REMOVED IN THIS MANNER THE LOCKING TANGS ARE DAMAGED AND THE TERMINAL IS NOT REUSABLE. B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: RJ B 10-NOV-10 A 10-APR-07 REV DATE PART NUMBER UNIT: MM GG SCALE: PDF JP SHEET: 2/2 FILE BY DRAW: PEARL DESCRIPTION: MPC3 EXTRACTION TOOLING SIZE WERI PART NO: 600662 A4 D