Model B Stack-Up Banana Plug Patch Cord Features Mates to Model #1581, 2854 or any standard size banana jack. Cross and vertical stacking banana plug. Ideal for providing jumpers or chassis boxes. Materials Connector: Stacking Banana Plug Spring – Beryllium Copper per ASTM-B-194, Alloy 172; Plug Body – Zinc, Die Cast Finish: Nickel plate Insulation: Polypropylene molded to the plug body and wire Color: Matches color of the wire Wire: 18 AWG, stranding 65 x 36 t.c., PVC insulated, 3.66mm (0.144”) O.D. Color: See Order Information Marking: “POMONA B-XX-*” Ratings (Entire Assembly) Operating Temperature: +55ºC (+131ºF) Max Operating Voltage: For CE compliance and for personal safety, do not hold in hand when voltages exceed 30 Vrms/60 Vdc. Maximum voltage for hands free use in controlled testing environments: 5000 WVDC Do not use on circuits where transient stresses can exceed the rated voltage. Current: 15 Amperes Cont.. Ordering Information Model: B-XX-* XX = Cable Length; Standard Lengths: 4” (102), 8” (203), 12” (305), 18” (457), 24” (610), 36” (914), 48” (1219), 60” (1524) & 72" ((1829). Additional lengths can be quoted upon request. * = Color, -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White Ordering Example: B-72-2 Indicates 72” in length, Color is Red. USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2016 Page 1 of 1