1 2 3 4 5 OPERATION 1 - INSERT THE EXTRACTOR TOOL INTO THE HOUSING. A 2 - USE THE SLOTS LOCATED ON THE INSIDE OF THE HOUSING TO GUIDE THE EXTRACTION TOOL BLADES INTO THE HOUSING UNTIL CONTACT IS MADE WITH TERMINAL. 3 - CONTINUE TO INSERT THE TOOL ALWAYS CHECKING TO SEE THAT BLADES OF EXTRACTION TOOL ARE ON THE OUTSIDE OF THE CONTACT. 4 - CONTINUE TO INSERT EXTRACTION TOOL INTO HOUSING UNTIL THE LOOKING TANGS HAVE SNAPPED OUT THEIR LOCKED POSITION, IF THE TERMINAL LOCKING TABS ARE STILL NO TOTALLY DEPRESSED, HOLD ON TIGHT TO THE WIRE AND PUSH IT TOWARDS THE EXTRACTOR TOOL,THIS WILL COMPLETY DEPRESS THE LOCKING TABS. 5 - GENLYPULL THE TERMINAL BY THE WIRE, OUT FROM THE HOUSING. B NOTE: WHEN A TERMINAL IS REMOVED IN THIS MANNER THE LOCKING TANGS ARE DAMAGED AND THE TERMINAL IS NOT REUSABLE. PUSH THE EXTRACTOR TOOL INTO HOUSING PULL WIRE AND TERMINAL C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: RJ B 05-NOV-10 A 10-APR-07 REV DATE PART NUMBER UNIT: MM GG SCALE: PDF JP SHEET: 2/2 FILE BY DRAW: PEARL DESCRIPTION: MPC4 EXTRACTION TOOLING SIZE WERI PART NO: 600649 A4 D