Datasheet (PDF)

rBOX201-4COM
Robust Din-rail Fanless Embedded System
with AMD LX800 + CS5536AF and
4 Isolated COM
Wireless
(3G/GPRS)
LED indicators (power, alarm,
ready/active, COM)
AMD LX800
Processor
Features
● Fanless and cableless design
● Supports AMD LX800 processor
● Wide temperature operation of -40°C ~ +70°C
● 4 isolated COM ports
● 2 isolated 10/100Mbps Ethernet ports
● 2 watchdog timer
● LED indicators
● SNMP V1/V2c
● Supports 1 CompactFlash™
● 2 power paths with terminal block and 12-48VDC
● Supports AXView remote monitoring software package
4 isolated COM
Front view
Isolation
Ext. Temp
IP30
UL508
Fanless
Din-rail kit
Low Power
Rear view
Introduction
The rBOX201-4COM cost-effective din-rail fanless embedded system utilizes the low
power AMD LX800 processor and is designed to withstand temperatures ranging from
-40°C to +70°C for use in extreme operating environments.
To prevent ESD and over-voltage, this super compact-size rBOX201-4COM is equipped
with four isolated RS-232/422/485, two isolated 10/100Mbps Ethernet for offering
magnetic isolation protection. Two power paths input minimizes the risk of data loss in
the event of a single power failure. IP30 housing, wide operating temperature range and
Safety/EMI/EMS compliance, the rBOX201-4COM is ideal for intelligent computing and
communication solutions in critical environments such as power utility, transportation
and more. Besides, the rBOX201-4COM is also specially designed for remote control/
monitoring management applications like unmanned control room, industrial machine,
automatic parking lot, traffic cabinet and more.
The ready-to-run rBOX201-4COM equipped with AXView remote monitoring software
is a total solution for power plant automation, facility monitoring systems, intelligent
transportation systems, and more.
Specifications
Standard Color
Construction
CPU
System Memory
System I/O Outlet
341
Sliver-Black
Extruded aluminum and heary-duty steel, IP30
AMD LX800 processor
1 x 200-pin DDR400 SO-DIMM max. up to 1 GB
Serial Port
4 x Isolated RS-232/422/485 (COM 1~4)
Interface select by software or BIOS
Supports Auto Flow Control in RS-485
mode
ESD protection 15 KV
Magnetic isolation protection 2 KV
COM 1 & COM 2 speed up to 115.2kbps
COM 3 & COM 4 serial port speed up to
921.6kbps
LAN
2 x 10/100Mbps Ethernet
Magnetic isolation protection 1.5 KV
System I/O Outlet
USB
VGA
Power Input
Alarm Contact
Wireless
Watchdog Timer
LEDs
Storage
Installation
Power Supply
Operating Temperature
Storage Temperature
Humidity
Weight (net/gross)
Dimensions
EOS Support
2 x USB 2.0
USB power distribution control by
software
1 x DB15 connector
2 x DC power input with terminal block
one relay output with current 0.5A
@30VDC
1 x Mini Card (Full size, supports USB
only)
1 x SIM card socket onboard
Supports 3G/GPRS
2 WDT
WDT 1: one step is 1 sec, 255 levels
WDT 2: one step is 250ms, 255 levels
System
Power, Alarm, Ready/Active, COM
(TXD,RXD)
Alarm
DC PWR1 or PWR2 is lost (default)
User define event
Supports 1 x CompactFlash™
Din-rail, wall mount
2 power paths
Power Input Range 12-48VDC
Power Input Rating 12-48VDC, 1.5-0.4A
Power Protection DC Version:
OVP (over voltage protection)
UVP (under voltage protection) Reverse
protection
-40°C ~ +70°C (-40°F ~ +158°F)
-45°C ~ +85°C (-49°F ~ +185°F)
10% ~ 95%
1.38 kg (3 lb)/1.72 kg (3.78 lb)
81 mm (3.18") (W) x 110 mm (4.33") (D) x 135 mm (5.31") (H)
XPE, WinCE, Linux support package
* All specifications and photos are subject to change without notice.
Specifications
ISO
Safety
Compliance
EMI
Compliance
EMS
Compliance
Environmental Test
Ordering Information
Manufactured in an ISO9001 facility
UL508, UL60950-1
Heavy Industrial CE, including:
EN60950-1, IEC60950-1
FCC Part 18
Heavy Industrial CE, including:
EN61000-6-4, EN61000-3-2, EN61000-3-3
EN50121-4 (Railway application)
Heavy Industrial CE, including:
EN61000-6-2
EN61000-4-2 (ESD standards)
* Contact: +/- 6 KV; criteria B
* Air: +/- 8 KV; criteria B
EN61000-4-3 (radiated RFI standards)
* 10V/m, 80 to 1000 MHz; 80% AM criteria A
EN61000-4-4 (burst standards)
* Signal ports: +/- 2 KV; criteria B
* DC power ports: +/- 2 KV; criteria B
EN61000-4-5 (surge standards)
* Signal ports: +/- 1 KV; line-to-line; criteria B
* DC power ports: +/- 0.5 KV; line-to-earth; criteria B
EN61000-4-6 (induced RFI standards)
* Signal ports: 10 Vrms @ 0.15 ~ 80 MHz; 80% AM
criteria A
* DC power ports: 10 Vrms @ 0.15 ~ 80 MHz; 80% AM
criteria A
EN61000-4-8 (magnetic field standards)
* 30 A/m @ 50, 60 Hz; criteria A
IEC60068-2-6 Fc (vibration resistance)
5 g @ 10 ~ 150 Hz, amplitude 0.35 mm (operation/storage/
transport)
IEC60068-2-27 Ea (shock) 25 g @ 11 ms (half-sine shock
pulse; operation); 50 g @ 11 ms (half-sine shock pulse;
storage/transport)
IEC60068-2-32 Ed (free fall) 1 M (3.281ft)
Standard
rBOX201-4COM-FL-DC
Robust din-rail fanless embedded system with AMD LX800
processor and 4 isolated COM ports (-40°C ~ +70°C)
Optional
DDR SO-DIMM
512 MB ~ 1 GB (with W.T. memory)
CompactFlash™
2 GB or above (with W.T. CF)
Wall mount kit
Wireless (3G/GPRS) module for rBOX seriesit
*Specifications and certifications are based on options and may vary.
Overview
Embedded
Systems
Embedded
Systems for
Transportation
3
Embedded
Field
Controllers
Industrial
Firewall
Digital Signage
Solutions
Dimensions
Embedded
MicroBoxes
Industrial
Barebone
Systems
Industrial
Chassis
Backplanes
Power
Supplies
Peripherals &
Accessories
* All specifications and photos are subject to change without notice.
a x i o m te k . c o m
© 2016 Axiomtek Co., Ltd. All rights reserved.
342
Similar pages