L1 .28in 7.1mm L2 3.00in 76.2mm 1.50in 38.1mm PILOT PIN OPTIONAL FRONT L3 IEC 309 60A PIN AND SLEEVE CONNECTOR .51in 13mm .42in 10.6mm 17.00in 431.8mm 18.37in 466.7mm 10.000in 254mm 19.00in 482.6mm 3.47in 88.1mm B. Output Characteristics: 1) Voltage: 208V 2) Phase Current 27.74A Derated, N.A 3) Outlets: 12x IEC C13 & 6x IEC C19 C. Mechanical Characteristics: 1) Material CRS/G40 Galv. Coating 2) Finish: Powder Coated 3) Lettering: Silk-Screen 4) Storage Temp: -25 to 122F (-32 to 50C) D. Operating Environment: 1) Temperature: 32 to 122F (0 - 50C) 2) Relative Humidty: 0 to 95% (NonCondensing) 3) Elevation: 0 to 10,000FT (0 to 3000 m) E. Regulatory Conformance: 1) Safety Agency: UL/cUL, FCC 15 Class A, UL60950-1 2) RoHS: Compliant to Directive 2002/95/EC NOTE: BRACKETS CAN BE MOUNTED FRONT OR BACK 5 REV 1) Voltage: 200-220 3 DELTA 2) Frequency 50/60 Hz. 3) Line Current: 60A Maximum (48 Dreated, N.A.) 4) Load Capacity: 21.590 KVA 5) Overload Protection: 6x2P/20A UL489 Circuit Breaker 6X2P/15A UL489 Circuit Breaker 6) Power Cord: 10' (3m), 8/4 cord 7) Connector: IEC 309 60A PIN AND SLEEVE 001743-SPMS REAR CHANGE NOTICE A. Input Characteristics DRAWINGS IN ACCORDANCE WITH STANDARD ANSI Y14.5M-1994 . THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND IS COPYRIGHTED. EXCEPT WITH THE WRITTEN PERMISSION OF SPECTRUM CONTROL, INC. OR ITS SUBSIDIARIES, SUCH INFORMATION SHALL NOT BE PUBLISHED OR DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE AND THIS DOCUMENT SHALL NOT BE DUPLICATED IN WHOLE OR IN PART. TOLERANCES UNLESS OTHERW ISE SPECIFIED: DECIMAL .X ± .100 DECIMAL .XX ± .020 DECIMAL .XXX ±.010 ANGLES ± 0~30' THIRD ANGLE PROJECTION Spectrum Management Systems PDU,2U,60A,208V,12XC13,6XC19 72RA160BBRGN-20 DRAWN: DATE SHEET: ENGINEER: duntonl 9 /1 6 /2 0 1 0 1 OF 1 C.LITIZINGER STATE COLLEGE, PENNSYLVANIA