1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL INSULATOR: NYLON 66 FLAMABILITY RATING: UL94-V0 COLOR: WHITE CONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED CONTACT PLATING: TIN QUALITY CLASS: 25 MATING CYCLES PITCH: 4.20MM A ENVIRONMENTAL OPERATING TEMPERATURE: -40 UP TO 105°C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING: 6 TO 9A NB CIRCUITS AMPERES 2-3 9 4-5 8 B WORKING VOLTAGE: 600V AC INSULATOR RESISTANCE: >1000 MOHM DIELECTRIC WITHSTANDING VOLTAGE: 1500V AC/MN CONTACT RESISTANCE: 10 mOHM MAX STANDARD CERTIFIED: E323964 SOLDERING JEDEC LEAD FREE WAVE SOLDERING PROCESS CKT.#1 PACKAGING TRAY DIMENSION A = 4.20 x (NB. PIN - 1) B = 4.20 x (NB. PIN - 1) + 5.40 C LAST CKT. RoHS Compliant 01-JUL-15 PROJECTION: GENERAL TOLERANCE G F PINNING AK 25-SEP-14 DRAWING AS E 19-AUG-14 DIMENSIONS AS D 12-MAY-14 DRAWING UPDATE C B 13-FEB-14 18-NOV-09 CORRECTIONS STANDARD A 08-JUN-09 HOLE DIAMETER JP SHEET: 1/2 REV DATE FILE BY DRAW: AS .X = +/- 0.2 .XX = +/- 0.15 QL QL JP APPROVAL: BBu UNIT: MM DESCRIPTION: WR-MPC4 - 4.20MM MALE SINGLE ROW VERTICAL HEADER SIZE WERI PART NO: 649 0xx 111 22 A4 SCALE: D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 2/2 REV DATE FILE BY DRAW: QL D