CD4078BMS CMOS 8 Input NOR/OR Gate December 1992 Features Pinout CD4078BMS TOP VIEW • High Voltage Type (20V Rating) • Medium Speed Operation - tPHL, tPLH = 75ns (Typ.) at VDD = 10V K ** 1 13 J * B 3 12 H C 4 11 G D 5 10 F NC 6 9 E • Buffered Inputs and Output • 5V, 10V and 15V Parametric Ratings • Standardized, Symmetrical Output Characteristics • 100% Tested for Quiescent Current at 20V • Maximum Input Current of 1µA at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC • Noise Margin (Over Full Package/Temperature Range) - 1V at VDD = 5V - 2V at VDD = 10V - 2.5V at VDD = 15V • Meets All Requirements of JEDEC Tentative Standard No. 13B, “Standard Specifications for Description of ‘B’ Series CMOS Devices” 8 NC VSS 7 *J=A+B+C+D+E+F+G+H ** K = A + B + C + D + E + F + G + H NC = NO CONNECTION Functional Diagram A B Description C CD4078BMS NOR/OR Gate provides the system designer with direct implementation of the positive logic 8 input NOR and OR functions and supplements the existing family of CMOS gates. D The CD4078BMS is supplied in these 14 lead outline packages: F Braze Seal DIP Frit Seal DIP Ceramic Flatpack 14 VDD A 2 4 1 5 13 E G H4Q H1B H3W 2 3 H K J 9 10 11 12 J=A+B+C+D+E+F+G+H K=A+B+C+D+E+F+G+H 6, 8 = NO CONNECTION VDD = 14 VSS = 7 Logic Diagram A 2 B 3 C 4 D 5 13 J E 9 1 K F 10 G 11 H 12 FIGURE 1. LOGIC DIAGRAM CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999 7-1038 File Number 3326 Specifications CD4078BMS Absolute Maximum Ratings Reliability Information DC Supply Voltage Range, (VDD) . . . . . . . . . . . . . . . -0.5V to +20V (Voltage Referenced to VSS Terminals) Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VDD +0.5V DC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mA Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC Package Types D, F, K, H Storage Temperature Range (TSTG) . . . . . . . . . . . -65oC to +150oC Lead Temperature (During Soldering) . . . . . . . . . . . . . . . . . +265oC At Distance 1/16 ± 1/32 Inch (1.59mm ± 0.79mm) from case for 10s Maximum Thermal Resistance . . . . . . . . . . . . . . . . θja θjc Ceramic DIP and FRIT Package . . . . . 80oC/W 20oC/W Flatpack Package . . . . . . . . . . . . . . . . 70oC/W 20oC/W o Maximum Package Power Dissipation (PD) at +125 C For TA = -55oC to +100oC (Package Type D, F, K) . . . . . . 500mW For TA = +100oC to +125oC (Package Type D, F, K) . . . . . Derate Linearity at 12mW/oC to 200mW Device Dissipation per Output Transistor . . . . . . . . . . . . . . . 100mW For TA = Full Package Temperature Range (All Package Types) Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS PARAMETER Supply Current SYMBOL IDD CONDITIONS (NOTE 1) VDD = 20V, VIN = VDD or GND VDD = 18V, VIN = VDD or GND Input Leakage Current IIL VIN = VDD or GND VDD = 20 VDD = 18V Input Leakage Current IIH VIN = VDD or GND VDD = 20 GROUP A SUBGROUPS LIMITS TEMPERATURE MIN MAX 1 +25 - 0.5 µA +125oC - 50 µA 3 -55oC - 0.5 µA 1 +25o C -100 - nA 2 +125oC -1000 - nA 3 -55oC -100 - nA 1 +25oC - 100 nA 2 +125oC - 1000 nA - 100 nA - 50 mV - V 3 -55oC Output Voltage VOL15 VDD = 15V, No Load 1, 2, 3 +25oC, +125oC, -55oC Output Voltage VOH15 VDD = 15V, No Load (Note 3) 1, 2, 3 +25oC, +125oC, -55oC 14.95 VDD = 18V Output Current (Sink) IOL5 VDD = 5V, VOUT = 0.4V UNITS 2 oC 1 +25oC 0.53 - mA Output Current (Sink) IOL10 VDD = 10V, VOUT = 0.5V 1 +25oC 1.4 - mA Output Current (Sink) IOL15 VDD = 15V, VOUT = 1.5V 1 +25oC 3.5 - mA 1 +25oC - -0.53 mA 1 +25oC - -1.8 mA Output Current (Source) Output Current (Source) IOH5A IOH5B VDD = 5V, VOUT = 4.6V VDD = 5V, VOUT = 2.5V Output Current (Source) IOH10 VDD = 10V, VOUT = 9.5V 1 +25oC - -1.4 mA Output Current (Source) IOH15 VDD = 15V, VOUT = 13.5V 1 +25oC - -3.5 mA 1 +25oC -2.8 -0.7 V 1 +25oC 0.7 2.8 V N Threshold Voltage P Threshold Voltage Functional VNTH VPTH F VDD = 10V, ISS = -10µA VSS = 0V, IDD = 10µA VDD = 2.8V, VIN = VDD or GND 7 +25oC VDD = 20V, VIN = VDD or GND 7 +25oC VDD = 18V, VIN = VDD or GND 8A +125oC VDD = 3V, VIN = VDD or GND 8B -55oC VOH > VOL < VDD/2 VDD/2 V Input Voltage Low (Note 2) VIL VDD = 5V, VOH > 4.5V, VOL < 0.5V 1, 2, 3 +25oC, +125oC, -55oC - 1.5 V Input Voltage High (Note 2) VIH VDD = 5V, VOH > 4.5V, VOL < 0.5V 1, 2, 3 +25oC, +125oC, -55oC 3.5 - V Input Voltage Low (Note 2) VIL VDD = 15V, VOH > 13.5V, VOL < 1.5V 1, 2, 3 +25oC, +125oC, -55oC - 4 V Input Voltage High (Note 2) VIH VDD = 15V, VOH > 13.5V, VOL < 1.5V 1, 2, 3 +25oC, +125oC, -55oC 11 - V NOTES: 1. All voltages referenced to device GND, 100% testing being implemented. 2. Go/No Go test with limits applied to inputs. 7-1039 3. For accuracy, voltage is measured differentially to VDD. Limit is 0.050V max. Specifications CD4078BMS TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS PARAMETER Propagation Delay Transition Time Maximum Clock Input Frequency SYMBOL TPHL TPLH CONDITIONS (NOTES 1, 2) GROUP A SUBGROUPS TEMPERATURE VDD = 5V, VIN = VDD or GND 9 10, 11 TTHL TTLH VDD = 5V, VIN = VDD or GND FCL VDD = 5V, VIN = VDD or GND 9 10, 11 +25oC +125oC, -55oC +25oC +125oC, -55oC LIMITS MIN MAX UNITS - 300 ns - 405 ns - 200 ns - 270 ns 9 +25oC 3 - MHz 10, 11 +125oC, -55oC 2.22 - MHz MIN MAX UNITS - 0.25 µA NOTES: 1. VDD = 5V, CL = 50pF, RL = 200K 2. -55oC and +125oC limits guaranteed, 100% testing being implemented. TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS LIMITS PARAMETER Supply Current SYMBOL IDD CONDITIONS NOTES VDD = 5V, VIN = VDD or GND VDD = 10V, VIN = VDD or GND VDD = 15V, VIN = VDD or GND 1, 2 1, 2 1, 2 TEMPERATURE -55oC, +25oC +125oC - 7.5 µA -55oC, +25oC - 0.5 µA +125oC - 15 µA - 0.5 µA -55oC, +25oC - 30 µA Output Voltage VOL VDD = 5V, No Load 1, 2 +25oC, +125oC, -55oC - 50 mV Output Voltage VOL VDD = 10V, No Load 1, 2 +25oC, +125oC, -55oC - 50 mV Output Voltage VOH VDD = 5V, No Load 1, 2 +25oC, +125oC, -55oC 4.95 - V Output Voltage VOH VDD = 10V, No Load 1, 2 +25oC, +125oC, -55oC 9.95 - V Output Current (Sink) IOL5 VDD = 5V, VOUT = 0.4V 1, 2 +125oC 0.36 - mA -55oC 0.64 - mA +125oC 0.9 - mA -55oC 1.6 - mA +125oC 2.4 - mA -55oC 4.2 - mA +125oC - -0.36 mA -55oC - -0.64 mA +125oC - -1.15 mA -55oC - -2.0 mA +125oC - -0.9 mA -55oC - -1.6 mA +125oC - -2.4 mA -55oC - -4.2 mA +25oC, +125oC, - 3 V Output Current (Sink) Output Current (Sink) Output Current (Source) Output Current (Source) Output Current (Source) Output Current (Source) Input Voltage Low IOL10 IOL15 IOH5A IOH5B IOH10 IOH15 VIL VDD = 10V, VOUT = 0.5V VDD = 15V, VOUT = 1.5V VDD = 5V, VOUT = 4.6V 1, 2 1, 2 1, 2 VDD = 5V, VOUT = 2.5V 1, 2 VDD = 10V, VOUT = 9.5V VDD =15V, VOUT = 13.5V VDD = 10V, VOH > 9V, VOL < 1V 1, 2 1, 2 1, 2 +125oC -55oC 7-1040 Specifications CD4078BMS TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) LIMITS SYMBOL CONDITIONS NOTES TEMPERATURE MIN MAX UNITS Input Voltage High PARAMETER VIH VDD = 10V, VOH > 9V, VOL < 1V 1, 2 +25oC, +125oC, -55oC 7 - V Propagation Delay TPHL TPLH VDD = 10V 1, 2, 3 +25oC - 150 ns VDD = 15V 1, 2, 3 +25oC - 110 ns 1, 2, 3 +25oC - 100 ns 1, 2, 3 +25oC - 80 ns VDD = 10V 1, 2, 3 +25oC 6 - MHz VDD = 15V 1, 2, 3 +25oC 8.5 - MHz 1, 2 +25oC - 7.5 pF Transition Time TTHL TTLH Maximum Clock Input Frequency FCL Input Capacitance CIN VDD = 10V VDD = 15V ut NOTES: 1. All voltages referenced to device GND. 2. The parameters listed on Table 3 are controlled via design or process and are not directly tested. These parameters are characterized on initial design release and upon design changes which would affect these characteristics. 3. CL = 50pF, RL = 200K, Input TR, TF < 20ns. TABLE 4. POST IRRADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS LIMITS PARAMETER Supply Current SYMBOL IDD N Threshold Voltage VNTH N Threshold Voltage Delta ∆VTN P Threshold Voltage VTP P Threshold Voltage Delta ∆VTP Functional F CONDITIONS NOTES TEMPERATURE VDD = 20V, VIN = VDD or GND 1, 4 +25oC VDD = 10V, ISS = -10µA 1, 4 +25oC VDD = 10V, ISS = -10µA 1, 4 +25oC VSS = 0V, IDD = 10µA 1, 4 VSS = 0V, IDD = 10µA VDD = 18V, VIN = VDD or GND MAX UNITS - 2.5 µA -2.8 -0.2 V - ±1 V +25oC 0.2 2.8 V 1, 4 +25oC - ±1 V 1 +25oC VOH > VDD/2 VOL < VDD/2 V 1, 2, 3, 4 +25oC - 1.35 x +25oC Limit ns VDD = 3V, VIN = VDD or GND Propagation Delay Time TPHL TPLH VDD = 5V MIN 3. See Table 2 for +25oC limit. NOTES: 1. All voltages referenced to device GND. 2. CL = 50pF, RL = 200K, Input TR, TF < 20ns. 4. Read and Record TABLE 5. BURN-IN AND LIFE TEST DELTA PARAMETERS +25OC PARAMETER SYMBOL DELTA LIMIT Supply Current - SSI IDD ± 0.1µA Output Current (Sink) IOL5 ± 20% x Pre-Test Reading IOH5A ± 20% x Pre-Test Reading Output Current (Source) TABLE 6. APPLICABLE SUBGROUPS CONFORMANCE GROUP Initial Test (Pre Burn-In) MIL-STD-883 METHOD GROUP A SUBGROUPS 100% 5004 1, 7, 9 7-1041 READ AND RECORD IDD, IOL5, IOH5A Specifications CD4078BMS TABLE 6. APPLICABLE SUBGROUPS MIL-STD-883 METHOD GROUP A SUBGROUPS Interim Test 1 (Post Burn-In) 100% 5004 1, 7, 9 IDD, IOL5, IOH5A Interim Test 2 (Post Burn-In) 100% 5004 1, 7, 9 IDD, IOL5, IOH5A 100% 5004 1, 7, 9, Deltas 100% 5004 1, 7, 9 100% 5004 1, 7, 9, Deltas 100% 5004 2, 3, 8A, 8B, 10, 11 CONFORMANCE GROUP PDA (Note 1) Interim Test 3 (Post Burn-In) PDA (Note 1) Final Test Group A Group B IDD, IOL5, IOH5A Sample 5005 1, 2, 3, 7, 8A, 8B, 9, 10, 11 Subgroup B-5 Sample 5005 1, 2, 3, 7, 8A, 8B, 9, 10, 11, Deltas Subgroup B-6 Sample 5005 1, 7, 9 Sample 5005 1, 2, 3, 8A, 8B, 9 Group D READ AND RECORD Subgroups 1, 2, 3, 9, 10, 11 Subgroups 1, 2 3 NOTE: 1. 5% Parameteric, 3% Functional; Cumulative for Static 1 and 2. TABLE 7. TOTAL DOSE IRRADIATION CONFORMANCE GROUPS Group E Subgroup 2 TEST READ AND RECORD MIL-STD-883 METHOD PRE-IRRAD POST-IRRAD PRE-IRRAD POST-IRRAD 5005 1, 7, 9 Table 4 1, 9 Table 4 TABLE 8. BURN-IN AND IRRADIATION TEST CONNECTIONS OSCILLATOR FUNCTION OPEN GROUND VDD Static Burn-In 1 Note 1 1, 6, 8, 13 2-5, 7, 9-12 14 Static Burn-In 2 Note 1 1, 6, 8, 13 7 2-5, 9-12, 14 Dynamic BurnIn Note 1 6, 8 7 14 1, 6, 8, 13 7 2-5, 9-12, 14 Irradiation Note 2 9V ± -0.5V 50kHz 1, 13 2-5, 9-12 25kHz NOTE: 1. Each pin except VDD and GND will have a series resistor of 10K ± 5%, VDD = 18V ± 0.5V 2. Each pin except VDD and GND will have a series resistor of 47K ± 5%; Group E, Subgroup 2, sample size is 4 dice/wafer, 0 failures, VDD = 10V ± 0.5V All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com 1042 CD4078BMS Schematic DETAIL OF INVERTERS VDD VDD p p p p p INVERTERS n 2* n n 3* VDD n VSS 4* p n 5* p p n 13 n n p p p n p INVERTERS 9* p VSS VDD n p n 10 * 1 n n 11 * n VSS VDD 12 * VSS * VSS FIGURE 2. SCHEMATIC DIAGRAM 7-1043 ALL INPUTS PROTECTED BY CMOS PROTECTION NETWORK CD4078BMS 30 GATE-TO-SOURCE VOLTAGE (VGS) = 15V 25 20 15 10V 10 5 5V 0 5 10 AMBIENT TEMPERATURE (TA) = +25oC 15.0 GATE-TO-SOURCE VOLTAGE (VGS) = 15V 12.5 10.0 10V 7.5 5.0 2.5 15 5V 0 5 10 15 DRAIN-TO-SOURCE VOLTAGE (VDS) (V) DRAIN-TO-SOURCE VOLTAGE (VDS) (V) FIGURE 3. TYPICAL OUTPUT LOW (SINK) CURRENT CHARACTERISTICS FIGURE 4. MINIMUM OUTPUT LOW (SINK) CURRENT CHARACTERISTICS DRAIN-TO-SOURCE VOLTAGE (VDS) (V) -15 -10 -5 DRAIN-TO-SOURCE VOLTAGE (VDS) (V) -15 -10 -5 AMBIENT TEMPERATURE (TA) = +25oC GATE-TO-SOURCE VOLTAGE (VGS) = -5V 0 -5 -10 -15 -10V -20 -25 -15V -30 AMBIENT TEMPERATURE (TA) = +25oC OUTPUT HIGH (SOURCE) CURRENT (IOH) (mA) 0 -5 -10V -15V PROPAGATION DELAY TIME (tPHL, tPLH) (ns) TRANSITION TIME (tTHL, tTLH) (ns) 200 SUPPLY VOLTAGE (VDD) = 5V 100 10V 0 0 15V 20 -10 -15 FIGURE 6. MINIMUM OUTPUT HIGH (SOURCE) CURRENT CHARACTERISTICS AMBIENT TEMPERATURE (TA) = +25oC 50 0 GATE-TO-SOURCE VOLTAGE (VGS) = -5V FIGURE 5. TYPICAL OUTPUT HIGH (SOURCE) CURRENT CHARACTERISTICS 150 0 OUTPUT HIGH (SOURCE) CURRENT (IOH) (mA) AMBIENT TEMPERATURE (TA) = +25oC OUTPUT LOW (SINK) CURRENT (IOL) (mA) OUTPUT LOW (SINK) CURRENT (IOL) (mA) Typical Performance Characteristics 40 60 80 100 LOAD CAPACITANCE (CL) (pF) AMBIENT TEMPERATURE (TA) = +25oC 175 SUPPLY VOLTAGE (VDD) = 5V 150 125 100 10V 75 15V 50 25 0 FIGURE 7. TYPICAL TRANSITION TIME AS A FUNCTION OF LOAD CAPACITANCE 10 20 30 40 50 60 70 80 LOAD CAPACITANCE (CL) (pF) 90 FIGURE 8. TYPICAL PROPAGATION DELAY TIME AS A FUNCTION OF LOAD CAPACITANCE 7-1044 100 CD4078BMS Typical Performance Characteristics (Continued) 105 8 o 6 AMBIENT TEMPERATURE (TA) = +25 C 4 POWER DISSIPATION (PD) (µW) (ONE OUTPUT LOADED) OUTPUT VOLTAGE (VO) (V) AMBIENT TEMPERATURE (TA) = +25oC SUPPLY VOLTAGE (VDD) = 15V 15 10V 10 5V 5 2 104 8 6 SUPPLY VOLTAGE (VDD) = 15V 4 2 10V 3 10 8 6 4 10V 5V 2 102 8 6 4 CL = 50pF 2 CL = 15pF 10 0 5 10 15 INPUT VOLTAGE (VI) (V) 20 2 25 FIGURE 9. TYPICAL PROPAGATION DELAY TIME AS A FUNCTION OF SUPPLY VOLTAGE 4 6 8 1 Dimensions in parenthesis are in millimeters and are derived from the basic inch dimensions as indicated. Grid graduations are in mils (10-3 inch). PASSIVATION: 4 6 8 2 4 6 8 2 4 6 8 104 FIGURE 10. TYPICAL DYNAMIC POWER DISSIPATION AS A FUNCTION OF INPUT FREQUENCY Chip Dimensions and Pad Layout METALLIZATION: 2 103 10 102 INPUT FREQUENCY (fI) (kHz) Thickness: 11kÅ − 14kÅ, AL. 10.4kÅ - 15.6kÅ, Silane BOND PADS: 0.004 inches X 0.004 inches MIN DIE THICKNESS: 0.0198 inches - 0.0218 inches 7-1045