pdf

Models 72904
Clip lead for Micro SMD Grabber
Attach your Micro SMD
Grabber to 2mm test leads
Features
•
•
Clip lead for easy attachment of Micro SMD
Grabber (72906) to test leads with 2mm plugs.
0.8mm female/2 mm female
Materials
•
•
•
•
•
Connector Body is Nickel plated Brass.
Connector insulation is Polypropylene
0.8mm Socket is Gold over Nickel plated Brass.
Insulation of 0.8mm is Elastomere
Wire is Silicone.
Ordering Information
Specifications
Max Current
Max. 2A
Max Voltage
33 V AC/70 V DC
Temperature
-20˚ C + 80˚ C
Max Resistance
Less than 8 mΩ
Rating: hands free testing in controlled environment:
70Vrms max. For CE compliance: Not intended for handheld use at voltages above 33Vrms/70Vdc
Model: 72904-Color
Available Colors: Black (-0), Red (-2)
USA: Sales: 800-490-2361 Technical Support: 800-2412060 Fax: 888-403-3360
Europe: 31-(0) 40 2675 150
International: 425-446-5500
e-mail: [email protected]
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Copyright © 2004 1/20/06
72904 Rev A
Page 1 of 1 Page 1 of