.PDF File

Subscribe
Contact Us
Microwaves & RF
RSS
Advertising
REGISTER
Technologies
News
Markets
Learning Resources
Companies
LOG IN
Community
HOME > TECHNOLOGIES > ACTIVE COMPONENTS > LOW-NOISE VCO TUNES 5685 TO 5780 MHZ
Advertisement
Low-Noise VCO Tunes 5685 to 5780 MHz
Jack Browne Microwaves and RF
SHARE
Mar 4, 2015
Recommend
Tweet
COMMENTS 0
0
EMAIL
Model CVCO55CXT-56855780 is a voltage-controlled
oscillator (VCO) that tunes
from 5685 to 5780 MHz by
merit of a control voltage
range of +0.3 to +4.7 VDC.
The oscillator achieves
typical phase noise of -102
dBc/Hz offset 10 kHz from
the carrier with 0-dBm
typical output power.
Supplied in a 0.5 × 0.5 in. surface-mount SMD package, the VCO controls secondharmonic levels to typically -30 dBc and exhibits pulling of 0.5 MHz and pushing of 1.5
MHz/V. The source is well suited for wireless access, digital radios, satellitecommunications (satcom) systems, and cellular base stations. Typical current
consumption is 25 mA from a +5 VDC supply.
Crystek Corp., 12730 Commonwealth Dr., Fort Myers, FL 33913; (800) 2373061, (239) 561-3311, FAX: (239) 561-1025
SHARE
PRINT
REPRINTS
FAVORITE
EMAIL
Tweet
Recommend
0
Top Articles
1. Technology Provides Easy Switch
Between Satellite, Cellular
Communications
2. Troposcatter System Maintains 50Mb/s Connection Over 100 Miles
3. Integrated Chipsets Break Ground for
5G Communications
4. Processor Upgrade Boosts X-Band
Radar’s Missile Tracking Capabilities
5. LED Control System Simplifies
Wireless Setup
Blogs
Can You Counterpoint a Counterpoint
on the FCC and Net Neutrality?
by Jean-Jacques DeLisle
Posted 2 days ago
in Splitting Signals
Please Log In or Register to post comments.
What Would Tesla Do?
Related Articles
VCO Cuts Phase Noise at 2.5 GHz
VCO Drops Phase Noise at 1050 MHz
Quiet VCO Tunes 2.5-GHz WiMAX
Low-Noise VCO Runs on Low Voltage
Hybrid VCO Enables Robust Startup
by Lou Frenzel
Posted 3 days ago
in Line of Sight
view all blogs
Similar pages