.PDF File

NewProducts
Amplifiers
Solid-State Hybrid Power
Amplifier
Model 50HM1G6AB-47 is a compact, wideband, 50 W Class AB solid-state hybrid power
amplifier module that
instantaneously covers
1 to 6 GHz. It operates
from a single DC voltage and provides 48 dB
of typical gain with excellent gain flatness, noise
figure and low intermodulation distortion for
military and wireless applications.
AR RF/Microwave Instrumentation
www.arworld.us
40 GHz. dB Control’s MPMs are based on a
modular design for easy customization and are
available with continuous wave or pulsed power.
Each MPM is a complete microwave amplifier
that uses both traveling wave tubes and solidstate technologies.
dB Control
www.dbcontrol.com
1 to 3 GHz, 1 kW HPA in 5U
Chassis
power RF Systems’ latest market release. Offering unrivaled size/power advantages and building on a design architecture that has been a
catalyst for technology upgrades from customers with diverse requirements from multiple
markets, model 2170 provides excellent performance for end applications that include, but are
not limited to, test and measurement, electronic warfare and communications.
Empower RF Systems Inc.
www.empowerrf.com
Wideband 4 W Amplifiers
Model 2170, covering 1
to 3 GHz and delivering
With 4 W output power and ±1 dB gain flatness
1 kW of broadband outacross 500 to 4200 MHz, Mini-Circuits’ new
put
power
in
a
5U,
air
Krytar Component Ads_Krytar.HalfPg.prod.ad.MWJ.2015
1/8/15
2:49
Page meet
1
ZHL-4W-422+
Class
A PM
amplifiers
your
cooled chassis is Emneeds for a wide range of applications. With
Low Noise GaN Amplifier
Custom MMIC announced the release of
the CMD218, a 5 to 9
GHz low noise amplifier (LNA) in die form, to
its growing line of standard GaN products.
The CMD218 offers a gain of 22 dB, output of 1
dB, compression point of +19.5 dBm and noise
figure of less than 1.25 dB across 5 to 9 GHz. In
addition, without an input limiter, the CMD218
can survive high incident power levels up to 5 W
with no degradation in performance.
Custom MMIC
www.custommmic.com
Sources
900 to 940 MHz VCO
Crystek’s CVCO33CL-0900-0940 VCO operates from 900 to 940 MHz with a control voltage
range of 0.2 to 2 V. This
VCO features a typical
phase noise of -104
dBc/Hz at 10 KHz offset and has excellent
linearity. Output power
is typically +3 dBm. Engineered and manufactured in the U.S., this new VCO is packaged in
the industry standard 0.3" × 0.3" SMD package.
Input voltage is 3 V, with a max. current consumption of 20 mA. Pulling and pushing are
minimized to 8 MHz and 1 MHz/V, respectively.
Crystek Corp.
www.crystek.com
Microwave Power Modules
In many military
applications, stringent
requirements
for size and
weight must be
met without sacrificing power
performance. These high-efficiency, conduction-cooled microwave power modules (MPM)
provide extremely dense packaging across 2 to
MICROWAVE JOURNAL
FEBRUARY 2015
147
Similar pages