.PDF File

MILITARY & AEROSPACE ELECTRONICS
INTELLIGENT AEROSPACE
SUBSCRIBE | ADVERTISE | ABOUT | CONTACT
HOME
Home
C4ISR
TOPICS
DEPARTMENTS
MAGAZINE
WEBCASTS
WHITE PAPERS
EBOOKS
BUYER'S GUIDE
Crystek introduces VCO for SATCOM and base stations
Open +
Crystek introduces VCO for SATCOM and base stations
January 14, 2015
Crystek Corp. in Fort Myers, Fla., is introducing the CVCO55FL- 0183-0219 voltage controlled oscillator (VCO) for RF
and microwave applications such as digital radio equipment, fixed wireless access, satellite communications (SATCOM)
systems, and base stations. The VCO operates from 183 MHz to 219 MHz with a control voltage range of 0.5 to 4.5 volts.
This VCO features a typical phase noise of -123 dBc/Hz at 10 KHz offset and output power typically of +8.5 dBm. Input
voltage is 5 volts, with a typical current consumption of 25 milliamps.
SPONSORED CONTENT BY Mercury Systems
Meeting Thermal Management Challenges in Rugged Defense
Applications
Brought To You By
More Military & Aerospace Electronics Current Issue Articles
More Military & Aerospace Electronics Archives Issue Articles
TODAY'S HEADLINES
MILITARY & AEROSPACE PHOTOS
Boeing to continue upgrading Japan AWACS
fleet
Upgraded Blue Sky Networks asset-tracking
software has SMS and email formatting impro...
Launching the Hornets
VIDEOS
Similar pages