.PDF File

Subscribe
Contact Us
Microwaves & RF
RSS
Advertising
REGISTER
Technologies
News
Markets
Learning Resources
Companies
LOG IN
Community
Safari Power Saver
Click to Start Flash Plug-in
HOME > TECHNOLOGIES > ACTIVE COMPONENTS > VCO CUTS PHASE NOISE AT 3650 MHZ
VCO Cuts Phase Noise at 3650 MHz
Jack Browne | Microwaves and RF
SHARE
Aug 11, 2015
Tweet
Recommend
COMMENTS 0
7
EMAIL
Model CVCO55CC-36503650 is a voltage-controlled
oscillator (VCO) designed
to operate at 3650 MHz
with a control voltage range
of +0.5 to +4.5 VDC. It
delivers +7 dBm typical
output power at that
frequency with typical
phase noise of -108 dBc/Hz
offset 10 kHz from the
carrier. The VCO, which is suitable for use in digital radios and satellite-communications
(satcom) systems, is supplied in an industry-standard 0.5 × 0.5 in. surface-mount
package. Current consumption is typically 35 mA at a supply voltage of +8 VDC. Secondharmonic suppression is typically -15 dBc. Pulling and pushing are 1.0 MHz and 0.2
MHz/V, respectively.
Top Articles
1. EMI: Electronic Misery in Design
2. Differential Diplexer Drives Sampling
ADCs
3. Microwave Tuners Show OpenRFM
Flexibility
4. Colorado Celebrates 20 Years of GPS
Technology
5. Modular Tester Performs 5G Channel
Sounding
Safari Power Saver
Click to Start Flash Plug-in
Crystek Corp., 12730 Commonwealth Dr., Fort Myers, FL 33913; (800) 2373061, (238) 561-3311, FAX: (239) 561-1025
SHARE
PRINT
REPRINTS
FAVORITE
Tweet
Recommend
7
EMAIL
Please Log In or Register to post comments.
Related Articles
Blogs
Low-Noise VCO Tunes 5685 to 5780 MHz
VCO Cuts Phase Noise at 2.5 GHz
VCO Drops Phase Noise at 1050 MHz
EMI: Electronic Misery in Design
by Lou Frenzel
Similar pages