SP-Cap/ Polymer Aluminum Capacitors Surface Mount Type Series: L ■ Features ● Low ESL by structure of SP-Cap 50% ESL of current products ● Super Low-ESR (4.5 m액) ● High temperature reflow soldering applicable (Peak : 260 °C 10s, main heating : 230 °C 40s) ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V.Range Nominal Cap.Range Capacitance Tolerance DC Leakage Current tan δ Surge Voltage –40 °C to +105 °C 2 V.DC 330 µF to 560 µF ±20 % (120 Hz/+20 °C) I < 0.1 CV (µA) 2 minutes < 0.06 (120 Hz/+20 °C) Rated Working Voltage ҂ 1.25 (15 °C to 35 °C) After applying rated working voltage for 1000 hours at 105 °C±2 °C, and then being stabilized at +20 °C, capacitor shall meet the following limits. Endurance Capacitance change tan δ DC leakage current Capacitance change of initial measurd value Moisture resistance tan δ DC leakage current ±10% of initial measured value < Initial specified value < Initial specified value After storing for 500 hours at 60 °C, 90 % 2 V.DC +70, –20 % < 200 % of initial specified value < Initial specified value ■ Marking ■ Dimensions in mm(not to scale) + H Cap. Polarity bar (Positive) L W1 P4 Lot No. W2 + W2 - P1 W.V. code P3 P2 P1 (mm) L±0.2 W1±0.2 H±0.2 W2±0.1 P1±0.3 P2±0.1 P3±0.2 P4±0.2 7.3 4.3 1.9 2.4 1.3 1.1 0.7 1.4 ✽ Externals of figure are the reference. ■ Standard Products CapaciSeries & Rated tance W.V. L Size Code (V.DC) (±20 %) (mm) (µF) 330 LX 2 470 560 7.3 7.3 7.3 7.3 7.3 7.3 Case Size Specification ✽1 W (mm) H (mm) 4.3 4.3 4.3 4.3 4.3 4.3 1.9 1.9 1.9 1.9 1.9 1.9 ✽2 Ripple ESR current (Ar.m.s.) (m액 max.) 3.5 6 3.8 4.5 3.5 6 3.8 4.5 3.5 6 3.8 4.5 Part number Min. Packaging Q’ty Reflow condition : 240 °C Reflow condition : 260 °C (pcs) [Proposal] ✽3 ✽3 — — — — — — EEFLX0D331R EEFLX0D331R4 EEFLX0D471R EEFLX0D471R4 EEFLX0D561R EEFLX0D561R4 3500 3500 3500 3500 3500 3500 ✽1: Ripple current (100 kHz/ +20 to +105 °C ), ✽2: ESR (100 kHz/+20 °C) ✽3: Please confirm EE25 in detail of the Mouting Specifications. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE20 – 00 Sep. 2010