SQ1563AEH www.vishay.com Vishay Siliconix N-and P-Channel 20 V (D-S) 175 °C MOSFET FEATURES PRODUCT SUMMARY N-CHANNEL P-CHANNEL 20 -20 RDS(on) (Ω) at VGS = ± 4.5 V 0.280 0.490 RDS(on) (Ω) at VGS = ± 2.5 V 0.360 0.750 RDS(on) (Ω) at VGS = ± 1.8 V 0.450 1.100 ID (A) 0.85 -0.85 VDS (V) Configuration • TrenchFET® power MOSFET • 100 % Rg and UIS tested • AEC-Q101 qualified c • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 N & P Pair Package SC-70 D1 SOT-363 SC-70 Dual (6 leads) D1 6 G2 5 S2 S2 4 G2 G1 1 S1 Top View 2 G1 3 D2 S1 D2 N-Channel MOSFET P-Channel MOSFET Marking Code: 9Q ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL N-CHANNEL Drain-Source Voltage VDS 20 Gate-Source Voltage VGS Continuous Drain Current TC = 25 °C TC = 125 °C Continuous Source Current (Diode Conduction) Pulsed Drain Current a Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipation a L = 0.1 mH TC = 25 °C TC = 125 °C Operating Junction and Storage Temperature Range ID P-CHANNEL -20 ±8 0.85 -0.85 0.85 -0.79 IS 0.85 -0.85 IDM 3.3 -3.3 IAS 3.5 -1.4 EAS 0.6 0.1 PD 1.5 1.5 0.5 0.5 TJ, Tstg -55 to +175 UNIT V A mJ W °C THERMAL RESISTANCE RATINGS PARAMETER Junction-to-Ambient Junction-to-Foot (Drain) PCB mount b SYMBOL N-CHANNEL P-CHANNEL RthJA 220 220 RthJF 100 100 UNIT °C/W Notes a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %. b. When mounted on 1" square PCB (FR4 material). S15-2107-Rev. A, 07-Sep-15 Document Number: 62986 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ1563AEH www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current On-State Drain Current a Drain-Source On-State Resistance a Forward Transconductance b VDS VGS(th) IGSS IDSS ID(on) RDS(on) gfs VGS = 0 V, ID = 250 μA N-Ch 20 - - VGS = 0 V, ID = -250 μA P-Ch -20 - - VDS = VGS, ID = 250 μA N-Ch 0.45 0.6 1.5 VDS = VGS, ID = -250 μA VDS = 0 V, VGS = ± 8 V P-Ch -0.45 -0.6 -1.5 N-Ch - - ± 100 P-Ch - - ± 100 VGS = 0 V VDS = 20 V N-Ch - - 1 VGS = 0 V VDS = -20 V P-Ch - - -1 VGS = 0 V VDS = 20 V, TJ = 125 °C N-Ch - - 50 VGS = 0 V VDS = -20 V, TJ = 125 °C P-Ch - - -50 VGS = 0 V VDS = 20 V, TJ = 175 °C N-Ch - - 150 VGS = 0 V VDS = -20 V, TJ = 175 °C P-Ch - - -150 VGS = 4.5 V VDS = ≥ 5 V N-Ch 2 - - VGS = -4.5 V VDS = ≤ -5 V P-Ch -2 - - VGS = 4.5 V ID = 0.85 A N-Ch - 0.150 0.280 VGS = -4.5 V ID = -0.85 A P-Ch - 0.400 0.490 VGS = 2.5 V ID = 0.85 A N-Ch - 0.180 0.360 VGS = -2.5 V ID = -0.85 A P-Ch - 0.595 0.750 VGS = 1.8 V ID = 0.85 A N-Ch - 0.210 0.450 VGS = -1.8 V ID = -0.85 A P-Ch - 0.800 1.100 VDS = 10 V, ID = 0.85 A N-Ch - 2.6 - VDS = -10 V, ID = -0.85 A P-Ch - 1.5 - N-Ch - 67 89 V nA μA A Ω S Dynamic b Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Gate Resistance Rg Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge c Qgd S15-2107-Rev. A, 07-Sep-15 VGS = 0 V VDS = 10 V, f = 1 MHz VGS = 0 V VDS = -10 V, f = 1 MHz P-Ch - 63 84 VGS = 0 V VDS = 10 V, f = 1 MHz N-Ch - 22 29 VGS = 0 V VDS = -10 V, f = 1 MHz P-Ch - 26 34 VGS = 0 V VDS = 10 V, f = 1 MHz N-Ch - 10 13 VGS = 0 V VDS = -10 V, f = 1 MHz P-Ch - 10 13 f = 1 MHz N-Ch - 3.8 11.6 f = 1 MHz P-Ch - 3.1 9.5 N-Ch - 0.93 1.25 1.33 VGS = 4.5V VDS = 10 V, ID = 0.85 A VGS = -4.5 V VDS = -10 V, ID = -0.85 A P-Ch - 1.0 VGS = 4.5 V VDS = 10 V, ID = 0.85 A N-Ch - 0.16 - VGS = -4.5 V VDS = -10 V, ID = -0.85 A P-Ch - 0.15 - VGS = 4.5 V VDS = 10 V, ID = 0.85 A N-Ch - 0.38 - VGS = -4.5 V VDS = -10 V, ID = -0.85 A P-Ch - 0.44 - pF Ω nC Document Number: 62986 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ1563AEH www.vishay.com Vishay Siliconix SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Dynamic b Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(on) tr td(off) tf VDD = 10 V, RL = 20 Ω ID ≅ 0.5 A, VGEN = 4.5 V, Rg = 1 Ω N-Ch - 3 6 VDD = -10 V, RL = 20 Ω ID ≅ -0.5 A, VGEN = -4.5 V, Rg = 1 Ω P-Ch - 2 4 VDD = 10 V, RL = 20 Ω ID ≅ 0.5 A, VGEN = 4.5 V, Rg = 1 Ω N-Ch - 21 27 VDD = -10 V, RL = 20 Ω ID ≅ -0.5 A, VGEN = -4.5 V, Rg = 1 Ω P-Ch - 22 28 VDD = 10 V, RL = 20 Ω ID ≅ 0.5 A, VGEN = 4.5 V, Rg = 1 Ω N-Ch - 20 25 VDD = -10 V, RL = 20 Ω ID ≅ -0.5 A, VGEN = -4.5 V, Rg = 1 Ω P-Ch - 28 35 VDD = 10 V, RL = 20 Ω ID ≅ 0.5 A, VGEN = 4.5 V, Rg = 1 Ω N-Ch - 17 24 VDD = 10 V, RL = 20 Ω ID ≅ -0.5 A, VGEN = -4.5 V, Rg = 1 Ω P-Ch - 20 25 N-Ch - - 3.3 P-Ch - - -3.3 IS = 0.85 A N-Ch - 0.9 1.2 IS = -0.85 A P-Ch - -0.9 -1.2 ns Source-Drain Diode Ratings and Characteristics b Pulsed Current a ISM Forward Voltage VSD A V Notes a. Pulse test; pulse width ≤ 300 μs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S15-2107-Rev. A, 07-Sep-15 Document Number: 62986 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ1563AEH www.vishay.com Vishay Siliconix N-CHANNEL TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 2.0 2.0 VGS = 5 V thru VGS = 1.5 V 1.6 ID - Drain Current (A) ID - Drain Current (A) 1.6 1.2 0.8 0.4 1.2 TC = 25 °C 0.8 0.4 VGS = 1 V TC = 125 °C 0.2 0.4 0.6 0.8 0.0 0.0 1.0 TC = - 55 °C 0.5 1.0 1.5 2.0 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 0.5 100 0.4 80 C - Capacitance (pF) RDS(on) - On-Resistance (Ω) 0.0 0.0 0.3 VGS = 1.8 V 0.2 VGS = 2.5 V VGS = 4.5 V 0.1 2.5 Ciss 60 40 Coss 20 Crss 0.0 0.0 0 0.4 0.8 1.2 1.6 2.0 0 5 10 15 VDS - Drain-to-Source Voltage (V) ID - Drain Current (A) Capacitance On-Resistance vs. Drain Current 5 2.0 RDS(on) - On-Resistance (Normalized) VGS - Gate-to-Source Voltage (V) 20 ID = 0.85 A VDS = 10 V 4 3 2 1 0 0.0 0.2 0.4 0.6 0.8 1.0 ID = 0.85 A 1.7 VGS = 2.5 V 1.4 1.1 VGS = 4.5 V 0.8 0.5 - 50 - 25 0 25 50 75 100 125 150 Qg - Total Gate Charge (nC) TJ - Junction Temperature (°C) Gate Charge On-Resistance vs. Junction Temperature S15-2107-Rev. A, 07-Sep-15 175 Document Number: 62986 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ1563AEH www.vishay.com Vishay Siliconix N-CHANNEL TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 1.0 10 RDS(on) - On-Resistance (Ω) IS - Source Current (A) 0.8 1 TJ = 150 °C 0.1 TJ = 25 °C 0.01 0.6 0.4 TJ = 150 °C 0.2 TJ = 25 °C 0.001 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 1 VSD - Source-to-Drain Voltage (V) Source Drain Diode Forward Voltage 3 4 5 On-Resistance vs. Gate-to-Source Voltage 0.5 VDS - Drain-to-Source Voltage (V) 30 0.3 VGS(th) Variance (V) 2 VGS - Gate-to-Source Voltage (V) 0.1 ID = 5 mA - 0.1 ID = 250 μA - 0.3 - 0.5 - 50 - 25 0 25 50 75 100 125 150 ID = 1 mA 28 26 24 22 20 - 50 - 25 175 0 25 50 75 100 125 150 175 TJ - Junction Temperature (°C) TJ - Temperature (°C) Threshold Voltage Drain Source Breakdown vs. Junction Temperature 10 ID - Drain Current (A) IDM Limited 1 Limited by RDS(on)* 1 ms ID Limited 0.1 10 ms 100 ms 1 s, 10 s, DC TC = 25 °C Single Pulse BVDSS Limited 0.01 0.01 0.1 1 10 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified 100 Safe Operating Area S15-2107-Rev. A, 07-Sep-15 Document Number: 62986 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ1563AEH www.vishay.com Vishay Siliconix N-CHANNEL THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 Notes: 0.1 PDM 0.1 0.05 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = R thJA = 220 °C/W 0.02 3. T JM - TA = PDMZthJA(t) Single Pulse 0.01 10-4 4. Surface Mounted 10-3 10-2 10-1 1 10 100 600 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10-4 10-3 10-2 10-1 1 10 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Foot Note • The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C) - Normalized Transient Thermal Impedance Junction-to-Foot (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. S15-2107-Rev. A, 07-Sep-15 Document Number: 62986 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ1563AEH www.vishay.com Vishay Siliconix P-CHANNEL TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 3 2.5 VGS = 5 V thru 3 V 2.0 ID - Drain Current (A) ID - Drain Current (A) 2 VGS = 2.5 V 2 1 VGS = 2 V 1 1.5 TC = 25 °C 1.0 0.5 VGS = 1.5 V TC = 125 °C VGS = 1 V 0 0 TC = - 55 °C 0.0 1 2 3 4 VDS - Drain-to-Source Voltage (V) 5 0 1 2 3 4 VGS - Gate-to-Source Voltage (V) Transfer Characteristics 5 150 4 120 C - Capacitance (pF) RDS(on) - On-Resistance (Ω) Output Characteristics 3 VGS = 1.8 V 2 90 Ciss 60 VGS = 2.5 V 1 5 Coss 30 VGS = 4.5 V Crss 0 0.0 0.4 0.8 1.2 1.6 0 2.0 0 ID - Drain Current (A) 5 10 15 VDS - Drain-to-Source Voltage (V) Capacitance On-Resistance vs. Drain Current 0.5 5 0.3 4 ID = -0.85 A VDS = 10 V VGS(th) Variance (V) VGS - Gate-to-Source Voltage (V) 20 3 2 ID = 250 μA 0.1 ID = 5 mA - 0.1 - 0.3 1 0 0.0 0.3 0.6 0.9 1.2 - 0.5 - 50 - 25 0 25 50 75 100 Qg - Total Gate Charge (nC) TJ - Temperature (°C) Gate Charge Threshold Voltage S15-2107-Rev. A, 07-Sep-15 125 150 175 Document Number: 62986 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ1563AEH www.vishay.com Vishay Siliconix P-CHANNEL TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 5 TJ = 150 °C 1 4 RDS(on) - On-Resistance (Ω) IS - Source Current (A) 10 0.1 TJ = 25 °C 0.01 3 2 TJ = 150 °C 1 TJ = 25 °C 0.001 0.0 0 0.2 0.4 0.6 0.8 1.0 1.2 0 1 VSD - Source-to-Drain Voltage (V) Source Drain Diode Forward Voltage 5 On-Resistance vs. Gate-to-Source Voltage 2.0 - 20 ID = 0.85 A VDS - Drain-to-Source Voltage (V) RDS(on) - On-Resistance (Normalized) 2 3 4 VGS - Gate-to-Source Voltage (V) 1.7 VGS = 2.5 V 1.4 VGS = 4.5 V 1.1 0.8 0.5 - 50 - 25 - 21 ID = 1 mA - 22 - 23 - 24 - 25 0 25 50 75 100 125 150 175 - 50 - 25 0 25 50 75 100 125 150 175 TJ - Junction Temperature (°C) TJ - Junction Temperature (°C) On-Resistance vs. Junction Temperature Drain Source Breakdown vs. Junction Temperature 10 ID - Drain Current (A) IDM Limited 1 Limited by RDS(on)* 1 ms ID Limited 0.1 10 ms 100 ms 1 s, 10 s, DC BVDSS Limited TC = 25 °C Single Pulse 0.01 0.01 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area S15-2107-Rev. A, 07-Sep-15 Document Number: 62986 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SQ1563AEH www.vishay.com Vishay Siliconix P-CHANNEL THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 2 Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 Notes: 0.1 PDM 0.1 0.05 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = R thJA = 220 °C/W 0.02 3. T JM - TA = PDMZthJA(t) Single Pulse 0.01 10-4 4. Surface Mounted 10-3 10-2 10-1 1 10 100 600 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient Normalized Effective Transient Thermal Impedance 2 1 Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10-4 10-3 10-2 10-1 1 10 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Foot Note • The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C) - Normalized Transient Thermal Impedance Junction-to-Foot (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?62986. S15-2107-Rev. A, 07-Sep-15 Document Number: 62986 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Ordering Information www.vishay.com Vishay Siliconix SC-70 Ordering codes for the SQ rugged series power MOSFETs in the SC-70 package: OLD ORDERING CODE a NEW ORDERING CODE SQ1421EDH - SQ1421EDH-T1_GE3 SQ1431EH SQ1431EH-T1-GE3 SQ1431EH-T1_GE3 SQ1440EH - SQ1440EH-T1_GE3 SQ1470AEH - SQ1470AEH-T1_GE3 SQ1539EH - SQ1539EH-T1_GE3 SQ1563AEH - SQ1563AEH-T1_GE3 DATASHEET PART NUMBER SQ1902AEL - SQ1902AEL-T1_GE3 SQ1912AEEH - SQ1912AEEH-T1_GE3 Note a. Old ordering code is obsolete and no longer valid for new orders Revision: 11-Nov-15 Document Number: 65839 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix SCĆ70: 6ĆLEADS MILLIMETERS 6 5 Dim A A1 A2 b c D E E1 e e1 L 4 E1 E 1 2 3 -B- e b e1 D -Ac A2 A L A1 Document Number: 71154 06-Jul-01 INCHES Min Nom Max Min Nom Max 0.90 – 1.10 0.035 – 0.043 – – 0.10 – – 0.004 0.80 – 1.00 0.031 – 0.039 0.15 – 0.30 0.006 – 0.012 0.10 – 0.25 0.004 – 0.010 1.80 2.00 2.20 0.071 0.079 0.087 1.80 2.10 2.40 0.071 0.083 0.094 1.15 1.25 1.35 0.045 0.049 0.053 0.65BSC 0.026BSC 1.20 1.30 1.40 0.047 0.051 0.055 0.10 0.20 0.30 0.004 0.008 0.012 7_Nom 7_Nom ECN: S-03946—Rev. B, 09-Jul-01 DWG: 5550 www.vishay.com 1 Application Note 826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR SC-70: 6-Lead 0.067 0.026 (0.648) 0.045 (1.143) 0.096 (2.438) (1.702) 0.016 0.026 0.010 (0.406) (0.648) (0.241) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index APPLICATION NOTE Return to Index www.vishay.com 18 Document Number: 72602 Revision: 21-Jan-08 VISHAY SILICONIX www.vishay.com Power MOSFETs Application Note AN917 Dual-Channel LITTLE FOOT ® 6-Pin SC-70 MOSFET Copper Leadframe Version Recommended Pad Pattern and Thermal Performance 175 °C Rated Part INTRODUCTION The new dual 6-pin SC-70 package with a copper leadframe enables improved on-resistance values and enhanced thermal performance as compared to the existing 3-pin and 6-pin packages with Alloy 42 leadframes. These devices are intended for small to medium load applications where a miniaturized package is required. Devices in this package come in a range of on-resistance values, in n-channel and p-channel versions. This technical note discusses pin-outs, package outlines, pad patterns, evaluation board layout, and thermal performance for the dual-channel version. 87 (mil) 26 (mil) 6 5 4 96 (mil) 71 (mil) 48 (mil) 23 (mil) PIN-OUT Figure 1 shows the pin-out description and pin 1 identification for the dual-channel SC-70 device in the 6-pin configuration. Both n-and p-channel devices are available in this package – the drawing example below illustrates the p-channel device. 61 (mil) 1 2 3 0.0 (mil) 8 (mil) 26 (mil) SOT-363 SC-70 (6-LEADS) 16 (mil) S1 1 6 D1 G1 2 5 G2 D2 3 4 S2 Top View Fig. 1 For package dimensions see outline drawing SC-70 (6-Leads) (www.vishay.com/doc?71154) See Application Note 826, Recommended Minimum Pad Patterns With Outline Drawing Access for Vishay Siliconix MOSFETs, (www.vishay.com/doc?72286) for the SC-70 6-pin basic pad layout and dimensions. This pad pattern is sufficient for the low-power applications for which this package is intended. Increasing the drain pad pattern (figure 2) yields a reduction in thermal resistance and is a preferred footprint. Revision: 15-Apr-13 EVALUATION BOARD FOR THE DUAL-CHANNEL SC70-6 The 6-pin SC-70 evaluation board (EVB) shown in figure 3 measures 0.6 in. by 0.5 in. The copper pad traces are the same as described in the previous section, Basic Pad Patterns. The board allows for examination from the outer pins to the 6-pin DIP connections, permitting test sockets to be used in evaluation testing. The thermal performance of the dual 6-pin SC-70 has been measured on the EVB, comparing both the copper and Alloy 42 leadframes. This test was then repeated using the 1-inch2 PCB with dual-side copper coating. A helpful way of displaying the thermal performance of the 6-pin SC-70 dual copper leadframe is to compare it to the traditional Alloy 42 version. Document Number: 75130 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 APPLICATION NOTE BASIC PAD PATTERNS Fig. 2 SC-70 (6 leads) Dual Application Note AN917 www.vishay.com Vishay Siliconix Dual-Channel LITTLE FOOT® 6-Pin SC-70 MOSFET Copper Leadframe Version Recommended Pad Pattern and Thermal Performance 175 °C Rated Part Front of Board SC70-6 Back of Board SC70-6 S1 D1 G1 G2 D2 S2 vishay.com SC70−6 DUAL Fig. 3 THERMAL PERFORMANCE COOPER LEADFRAME Junction-to-Foot Thermal Resistance (the Package Performance) ROOM AMBIENT 25 °C Thermal performance for the dual SC-70 6-pin package is measured as junction-to-foot thermal resistance, in which the “foot” is the drain lead of the device as it connects with the body. The junction-to-foot thermal resistance for this device is typically 80 °C/W, with a maximum thermal resistance of approximately 100 °C/W. This data compares favorably with another compact, dual-channel package - the dual TSOP-6 - which features a typical thermal resistance of 75 °C/W and a maximum of 90 °C/W. Power Dissipation for 175 °C Rated Part The typical RJA for the dual-channel 6-pin SC-70 with a copper leadframe is 224 °C/W steady-state, compared to 413 °C/W for the Alloy 42 version. All figures are based on the 1-inch2 FR4 test board. The following example shows how the thermal resistance impacts power dissipation for the dual 6-pin SC-70 package at varying ambient temperatures. Alloy 42 Leadframe ALLOY 42 LEADFRAME APPLICATION NOTE ROOM AMBIENT 25 °C PD T J(max.) - TA R JA T J(max.) - TA R JA PD T J(max.) - TA R JA PD 175 °C - 25 °C 224 °C/W PD 175 °C - 60 °C 224 °C/W PD 669 mW PD 513 mW Although they are intended for low-power applications, devices in the 6-pin SC-70 dual-channel configuration will handle power dissipation in excess of 0.5 W. TESTING To further aid the comparison of copper and Alloy 42 leadframes, Figures 4 and 5 illustrate the dual-channel 6-pin SC-70 thermal performance on two different board sizes and pad patterns. The measured steady-state values of RJA for the dual 6-pin SC-70 with varying leadframes are as follows: LITTLE FOOT 6-PIN SC-70 ELEVATED AMBIENT 60 °C PD T J(max.) - TA R JA PD 175 °C - 25 °C 413 °C/W PD 175 °C - 60 °C 413 °C/W PD 363 mW PD 278 mW Revision: 15-Apr-13 PD ELEVATED AMBIENT 60 °C 1) Minimum recommended pad pattern on the EVB board (see fig. 3). 1-inch2 2) Industry standard PCB with maximum copper both sides. ALLOY 42 COPPER 518 °C/W 344 °C/W 413 °C/W 224 °C/W The results indicate that designers can reduce thermal resistance (JA) by 34 % simply by using the copper leadframe device as opposed to the Alloy 42 version. In this example, a 174 °C/W reduction was achieved without an increase in board area. If an increase in board size is feasible, a further 120 °C/W reduction can be obtained by utilizing a 1-inch2. PCB area. Document Number: 75130 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Application Note AN917 www.vishay.com Vishay Siliconix Dual-Channel LITTLE FOOT® 6-Pin SC-70 MOSFET Copper Leadframe Version Recommended Pad Pattern and Thermal Performance 175 °C Rated Part Dual: Sx19xxEDH or Sx19xxEEH Compl.: Sx15xxEDH or Sx15xxEEH 500 500 400 400 Thermal Resistance (°C/W) Thermal Resistance (°C/W) The dual copper leadframe versions have the following suffix: 300 Alloy 42 200 Copper 100 300 Alloy 42 200 100 Copper 0 0 10-5 10-4 10-3 10-2 10-1 1 10 100 1000 Time (s) APPLICATION NOTE Fig. 4 Dual SC70-6 Thermal Performance on EVB Revision: 15-Apr-13 10-5 10-4 10-3 10-2 10-1 1 10 100 1000 Time (s) Fig. 5 Dual SC70-6 Comparison on 1-inch2 PCB Document Number: 75130 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000