download document

OV5693 5-megapixel product brief
lead free
available in
a lead-free
package
High-Performance 5-Megapixel Image Sensor for
Front-Facing Cameras in Flagship Smartphones and Tablets
The OV5693 is OmniVision's highest performance
1/4-inch, 5-megapixel image sensor, delivering DSCquality imaging and low-light performance as well as full
1080p high-definition video recording at 30 frames per
second (fps). Using OmniVision's proprietary 1.4-micron
OmniBSI-2™ pixel architecture, the OV5693 provides
best-in-class low-light performance and image quality in
a slim camera module. This makes the OV5693 an ideal
camera solution for slim flagship smartphones and
tablets, providing exceptional 5-megapixel "selfie"
images and high-quality 1080p video.
Leveraging OmniVision's second-generation industryleading backside illumination pixel technology, the
OV5693 offers full resolution 5-megapixel images at
30 fps, an integrated scaler, and 2x2 binning
functionality with re-sampling filter. The scaler enables
electronic image stabilization, while maintaining full
field-of-view in both 720p and 1080p HD video modes.
The 2x2 binning functionality, which features a postbinning re-sampling filter, further increases the sensor's
sensitivity, while minimizing spatial artifacts and
removing image artifacts around edges to produce crisp,
clean color images.
The sensor features a high-speed 2-lane MIPI interface
running up to 900 Mbps per lane and fits into an industry
standard module size of 8.5 x 8.5 mm with a z-height of
4.2 mm for an autofocus module.
Find out more at www.ovt.com.
OV5693
Applications
¬ Cellular and Mobile Phones
¬ PC Multimedia
¬ Digital Still Cameras (DSC)
¬ 3D Cameras
¬ Digital Video Camcorders (DVC)
Ordering Information
¬ OV05693-G06H-3A
¬ OV05693-G36H-3A
(color, chip probing, 180 µm backgrinding,
(color, chip probing, 180 µm backgrinding,
reconstructed 8" wafer with good die)
reconstructed 12" wafer with good die)
Product Features
¬ automatic black level calibration (ABLC) ¬ support 2x2 binning, full scalar
¬ programmable controls for frame rate,
mirror and flip, cropping, windowing,
and scaling
¬ standard serial SCCB interface
¬ image quality controls: lens correction
and defective pixel canceling
¬ embedded 512 bytes one-time
programmable (OTP) memory
for part identification, etc.
¬ supports output formats:
10-bit RAW RGB (MIPI)
Product Specifications
¬ up to 2-lane MIPI serial output interface
¬ two on-chip phase lock loop (PLL)
¬ supports horizontal and
vertical subsampling
¬ programmable I/O drive capability
¬ max S/N ratio: 37.1 dB
¬ power supply:
- core: 1.16 ~ 1.3V (1.2V typical)
- analog: 2.6 ~ 3.0V
- I/O: 1.7 ~ 3.0V
¬ dynamic range: 68.0 dB @ 8x gain
¬ power requirements:
- active: 239 mW
- XSHUTDN: 1 µW
¬ built-in 1.2V regulator for core
¬ supports images sizes: 5MP, EIS1080p,
1080p, 720p, VGA, QVGA
¬ built-in temperature sensor
¬ fast mode switching
¬ active array size: 2592 x 1944
¬ sensitivity: 1000 mV/lux-sec
¬ temperature range:
- operating: -30°C to +70°C junction
temperature
- stable image: 0°C to +50°C junction
temperature
¬ supports alternate row HDR timing
¬ supports 3D applications
¬ maximum image transfer rate:
- 5MP: 30 fps
- EIS1080p: 30 fps
- 1080p: 30 fps
¬ output formats: 10-bit RGB RAW
¬ lens size: 1/4"
¬ lens chief ray angle: 29.7° non-linear
¬ input clock frequency: 6 ~ 27 MHz
¬ scan mode: progressive
¬ pixel size: 1.4 µm x 1.4 µm
¬ dark current: 3.3 mV/sec
@ 60°C junction temperature
¬ image area: 3673.6 µm x 2738.4 µm
¬ dimensions:
- COB: 5350 µm x 4800 µm
- RW: 5400 µm x 4850 µm
Functional Block Diagram
OV5693 (rev 3A)
10-bit
ADC
AMP
ISP
row select
image
array
image output
interface
MIPI
image
sensor
processor
FIFO
image sensor core
column
sample/hold
MCP/N
MDP/N[1:0]
gain control
control register bank
4275 Burton Drive
Santa Clara, CA 95054
USA
Version 1.1, October, 2015
SIOD
SIOC
SCCB interface
SID
ATEST
GPIO
ILPWM
FSIN
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
STROBE
FREX
HREF
RGPD
VSYNC
PWDNB
XSHUTDN
timing generator and system control logic
TM
XVCLK
PLLs
OmniVision reserves the right to make changes to their products or to discontinue any product or
service without further notice. OmniVision, the OmniVision logo and OmniPixel are registered
trademarks of OmniVision Technologies, Inc. OmniBSI-2 is a trademark of OmniVision Technologies,
Inc. All other trademarks are the property of their respective owners.
Similar pages