OV9718 720p product brief Native High Definition OV9718 CameraChip™ lead free available in a lead-free package The 1/4-inch OV9718 is a native high-definition (HD) image sensor capable of capturing high quality 720p video at 60 frames per second (fps). Built on an enhanced OmniPixel3-HS™ pixel, the OV9718 combines excellent low-light performance of 3300 mV/lux-sec with fast frame rates, making it ideally suited for telepresence and high-end security applications. output capability provides improved dynamic range. In addition, the embedded sequential line- or frame-based HDR features allow higher dynamic range for highcontrast scenes using an external ISP. Its fast frame rate minimizes latency delay, resulting in quick response time for interactive real-time communication applications. The sensor's new and improved OmniPixel3-HS pixel architectures offers improved dynamic range, better low-light sensitivity and enhanced signal-to-noise ratio (SNR) performance compared to the previous generation sensor. The OV9718's 12-bit RGB RAW The OV9718 features a standard 2-lane MIPI/LVDS interface and comes in a 49-pin CSP3 package. Find out more at www.ovt.com. OV9718 Applications ¬ Security ¬ Telepresence Ordering Information Product Features ¬ OV09718-A49A-Z (color, lead-free, 49-pin CSP3) ¬ automatic black level calibration (ABLC) ¬ support 2x2 binning ¬ programmable controls for frame rate, ¬ mirror and flip, cropping and windowing ¬ ¬ image quality controls: lens correction and defective pixel canceling ¬ ¬ supports output formats: 8/10/12-bit RAW RGB (MIPI/LVDS) ¬ supports horizontal and vertical sub-sampling standard serial SCCB interface two-lane MIPI/LVDS serial output interface Product Specifications embedded 256 bits one-time programmable (OTP) memory for part identification, etc. ¬ on-chip phase lock loop (PLL) ¬ programmable I/O drive capability ¬ supports images sizes: 1280x800, 640x400, 320x200, and 160x100 ¬ built-in 1.5V regulator for core ¬ fast mode switching ¬ active array size: 1296 x 812 ¬ input clock frequency: 6 ~ 27 MHz ¬ power supply: - core: 1.5 VDC ±5% - analog: 2.6 ~ 3.0V - I/O: 1.7 ~ 3.0V ¬ max S/N ratio: 39 dB ¬ dynamic range: 73 dB @ 8x gain ¬ maximum image transfer rate: - 1280x800: 60 fps ¬ power requirements: - active: 95 mA - standby: 30 µA - XSHUTDOWN: 5 µA ¬ support alternate frame HDR/line HDR ¬ sensitivity: 3.3 V/lux-sec ¬ temperature range: - operating: -30°C to 85°C junction temperature - stable image: 0°C to 50°C junction temperature ¬ scan mode: progressive ¬ maximum exposure interval: 800 x tROW ¬ pixel size: 3.0 µm x 3.0 µm ¬ output formats: 12-bit RGB RAW ¬ dark current: 2.3 mV/s @ 50°C junction temperature ¬ lens size: 1/4" ¬ image area: 3936 µm x 2460 µm ¬ lens chief ray angle: 0° ¬ package dimensions: 6110 µm x 4930 µm Functional Block Diagram OV9718 12-bit ADC AMP MIPI/LVDS image array ISP row select column sample/hold image output FIFO image sensor processor BLC image sensor core MCP/N MDP/N[1:0] gain control 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.2, December, 2013 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com SDA SCCB slave interface SCL PLL SID control register bank XVCLK regulator LED STROBE GPIO FSIN/VSYNC TM XSHUTDOWN PWDNB timing generator and system control logic PLLs OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision, the OmniVision logo and OmniPixel are registered trademarks of OmniVision Technologies, Inc. OmniBSI-2 is a trademark of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.