85,2 +0,2 d1 Stecklänge / mating length ESL a32 a1 3,95 E = early mate, late break / voreilend 3 -0,4 0,6 max. 94 Datum Anforderungsstufe date class S = standard L = late mate, early break / nacheilend a b c d 3 2,54 +0,1 3 x 2,54 (=7,62) max.12,1 2,5 RC 2 10,2 -0,2 ERNI 6,4 -0,1 12,7 XXXXXXX 4,8 ±0,2 6 ±0,1 0,8 ±0,1 0,8 ±0,1 11,3 +0,2 max. 13,7 2,5 -0,2 d32 Stecklänge 87,5 mating length 88,9 Bestückungsplan / contact layout 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S 3 x 2,54 (=7,62) S S S S 1 ±0,1 Leiterplatten-Lochbild / PCB drillhole pattern 2,8 S S S S +0,1 S S S S S S S S S S S S S S S S 0,05 S S S S S S S S S S S S S S S S S S S S S S S S Missing information and dimensions per IEC 60 603-2 / DIN EN 60 603-2 alle Löcher/ all holes d c b a 31 x 2,54 (=78,74) 88,9 5,3 ±0,1 2,54 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 2,54 Lötanschluss 0,6x0,6mm / solder terminal 0,6x0,6mm Isolierwerkstoff / housing material : PA 46 GF 30 Bauart 4 / type 4 Anforderungsstufe 2 = 400 Steckzyklen / performance class 2 = 400 mating cycles Fehlende Maße und Angaben nach IEC 60 603-2 / DIN EN 60 603-2 d c b a S S S S Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. S S S S Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Messerleiste CD128 THR +Clip Male Conn. CD128 THR +Clip 384287 www.ERNI.com b 05.09.2011 Index Date Class STVCD I A3